Mismatched - 1000 sets of KAM Plastic Snaps for $19.95 (Originally $30.00) June 29 2018

Colors Available:

1. 1000 B20 - Pastel Blue (with White Studs) Kam Snaps/Plastic Snaps
2. 1000 B24 - Light Gray (with White Studs) Kam Snaps/Plastic Snaps
3. 1000 B31 - Hunter Green (with White Studs) Kam Snaps/Plastic Snaps
4. 1000 B32 - Denim Blue (with White Studs) Kam Snaps/Plastic Snaps
5. 1000 B35 - Purple (with White Studs) Kam Snaps/Plastic Snaps
6. 1000 B39 - Gray (with White Studs) Kam Snaps/Plastic Snaps
7. 1000 B48 - Periwinkle (with White Studs) Kam Snaps/Plastic Snaps
8. 1000 B58 - Light Navy (with White Studs) Kam Snaps/Plastic Snaps
9. 1000 G100 - Marina (with White Studs) Kam Snaps/Plastic Snaps
10. 1000 G105 - Meadow Green (with White Studs) Kam Snaps/Plastic Snaps
11. 1000 G106 - Coral (with White Studs) Kam Snaps/Plastic Snaps

Friday Fun Facts - The Anatomy Of A KAM Plastic Snap June 08 2018

KAM plastic snaps are wonderful. They are a SNAP to install and much easier and durable than a standard metal snap or sewable button.  They come in a multitude of colors and sizes.  Which one is right for you?

Here is a simple tutorial on the anatomy of a plastic snap set. There are 4 parts to a set:

• 2 Caps (Before installation they resemble a tack with a Round, Heart, or Star shaped head. They give a neat finished look to your snap.)
• 1 Socket (The female part with the larger raised circle that the stud (male part) fits into)
• 1 Stud (The male part with the smaller raised circle that fits inside the socket (female part))

SIZE 20:

• Size 20 (0.5" - 12.4 mm) snaps can be used for most general projects like baby diapers and clothing. They are our most popular plastic snap size, have the largest color variety, and have a good strong hold. We carry them in all 130 colors and clear.
• Standard Size 20 snaps have a 5.6mm prong length. Prong length refers to the length of the shaft on the backside of the Cap. When formed, the prong will compress and form a 'mushroom' shape to hold the Cap and Socket or Stud together.
• We also offer Long Prong Size 20 (0.5" - 12.4 mm) in a rainbow of colors. They are great for embroidered key fobs using Marine or Glitter Vinyl as well as other projects where you need just a little more prong length. Long Prong Size 20 snaps have a 6.2mm prong length.

 SIZE 16:

• Size 16 (0.4" - 10.2 mm) snaps are most commonly used for baby and toddler clothing, pacifier clips, mama pads, and small crafts. We carry them in our first 60 ("B") colors and clear.
• Size 16 snaps have a 4.2mm prong length. Prong length refers to the length of the shaft on the backside of the Cap. When formed, the prong will compress and form a 'mushroom' shape to hold the Cap and Socket or Stud together.
• The Size 16 Socket and Stud are less noticeably different. Many first time users don't immediately see the distinction. The Socket's raised circle is the larger of the two pictured, and the Stud's raised circle is smaller and inserts into the Socket (female) side.

SIZE 14:

• Our Size 14 (0.35" - 9.7 mm) snaps can be used in most applications where Size 16 snaps are used. We carry them in White and Black at this time.
• Our Size 14 snaps have a 5.0mm prong length. Prong length refers to the length of the shaft on the backside of the Cap. When formed, the prong will compress and form a 'mushroom' shape to hold the Cap and Socket or Stud together.
• As with the Size 16, the Size 14 Socket and Stud are less noticeably different. The Socket's circle is the larger of the two pictured.  The Stud's circle is smaller and inserts into the Socket (female) side. Size 16 and Size 14 Sockets and Studs are the same; only the cap differs.

SIZE 19:

• Size 19 (0.475" - 12 mm) snaps are used for heavy duty applications requiring a strong grip. They are often used with tote bags, coats, tarps, and upholstery. We carry them in White and Black at this time.
• Size 19 snaps have a 6.9mm prong length. Prong length refers to the length of the shaft on the backside of the Cap. When formed, the prong will compress and form a 'mushroom' shape to hold the Cap and Socket or Stud together.
• The Size 19 Socket and Studs are larger, but similar in appearance to Size 20 Sockets and Studs.

SIZE 22:

• Size 22 (0.55" - 14.1 mm) snaps are used for heavy duty applications requiring a strong grip. They are often used with tote bags, coats, tarps, and upholstery. We carry them in White and Black at this time.
• Size 22 snaps have a 6.9mm prong length. Prong length refers to the length of the shaft on the backside of the Cap. When formed, the prong will compress and form a 'mushroom' shape to hold the Cap and Socket or Stud together.
• The Size 22 Socket and Studs are larger, but similar in appearance to Size 20 Sockets and Studs.

Have you seen our KAM Plastic Snap Professional Press at work? May 10 2018

It makes installing KAM Plastic Snaps a breeze! I am in love with our KAM Professional Press and we carry them in pretty Coral.

We are giving a KAM Plastic Snap Professional Press and Long Prong KAM Plastic Snap Starter Pack away right now on our Business Facebook Page in celebration of Mother's Day. (Giveaway good until Monday 05/14/2018)

If you can’t wait, we have our Coral Presses for sale for 10% off on our website right now.  Also, take an additional 10% any of our snap related products with coupon code: SNAPLOVE

KAM Professional Snap Press

#ilikebigbuttons #kamsnaps #plasticsnaps #snappress #shopilikebigbuttons

How Many I Like Big Buttons! Products Can You Find? January 09 2018

How many I Like Big Buttons! products can you find in the picture below?

Above is a fun quiz, how many I Like Big Buttons! products can you spot? The answers are at the bottom of this post. Good Luck!!!

It has been a while since I have introduced myself. Hi! I am Gena, the CEO and MOM of I Like Big Buttons! :) ILikeBigButtons.com is a family run, small business located in beautiful Washington State. We have been serving our customers for almost 14 years now via the internet. Crazy!

So here I am selling a large variety of crafty items that I love with the help of my amazing children and husband. I am sure you will find as much joy in crafting with them as I am. It is a privilege to get to help support my family, teach my children to have a solid work ethic, and be a full-time mom all because of I Like Big Buttons! and your support.

Thank you, Gena (CEO of ILikeBigButtons.com)

ANSWER KEY: 

#1 - Lobster Clasps - 3 sizes available in Silver or Antique Brass

#2 - KAM Plastic Snaps - Size 20 is available in 130+ colors (Also, available in 4 other sizes, color availability may vary)

#3 - Split Rings - Available in Silver, Antique Brass, and Gunmetal

#4 - Pendant Bezels - 2 sizes available in Silver and Antique Brass

#5 - Cover Buttons - 7 sizes available in Flat Back (Glueable) and Wire Back (Sewable)

To See Our Full Product Catalog visit here.

An I Like Big Buttons Christmas! Idea #24: Making a Felt Coin Purse with KAM Snaps and PDF Pattern December 22 2017

Gift Idea #24:

As the hours draw to a close before Christmas day. A felt coin purse is a great last minute gift that takes only minutes to make. 

Making a Felt Coin Purse with KAM Snaps and PDF Pattern

Supplies:

• Sheet of Felt
• 1 KAM Snap Set
• KAM Snap Pliers and Awl
• Coin Purse PDF Pattern
• Standard Sewing Machine See More

#ilikebigbuttons #shopilikebigbuttons #kamsnaps #plasticsnaps #snapping #itsasnap  #coinpurse #kamsnapcoinpurse #pdfpattern #christmasidea #gift #christmasgift

An I Like Big Buttons Christmas! Idea #22: How to make a Reversible Frayed or Finished Edge Coffee Cozy with KAM Snaps and Free PDF Pattern December 21 2017

Gift Idea #22:

I am made a couple cute Coffee Cozys for my cousin a few years back.  She had called me a few weeks before super excited about the idea to make Coffee Cozy with KAM Snaps :).  This gift is perfect for the coffee lover in your life.

How to make a Reversible Frayed Edge Coffee Cozy with KAM Snaps and Free PDF Pattern

Supplies:

• Fabric of your choosing
• Felt or other insulation/batting layer
• 2 KAM Snap Sets
• KAM Snap Pliers and Awl
• Standard Sewing Machine See More

How to make a Reversible Coffee Cozy with KAM Snaps and Free PDF Pattern

Supplies:

• Fabric of your choosing
• Insulation/batting layer
• 2 KAM Snap Sets
• KAM Snap Pliers and Awl
• Standard Sewing Machine

#ilikebigbuttons #shopilikebigbuttons #kamsnaps #plasticsnaps #snapping #itsasnap  #coffeelover #coffeelovergifts #coffeecozy #drinkcozy #coffeecuff #coffeelove #christmasidea #gift #christmasgift

An I Like Big Buttons Christmas! Idea #21: How To Make Baby Bibs (3 Great Patterns!) December 20 2017

Gift Idea #21:

Three great bib patterns for the new blessings in your life. A wonderful gift any time of the year!

See Full Tutorial: The Ultimate Catch-All Bib by Peek-A-Boo Pattern Shop

See Full Tutorial: Reversible Catch-All Bib by The Crazy Tailor

See Full Tutorial: Stay Dry Drooler Bib by Pattern Revolution

#ilikebigbuttons #shopilikebigbuttons #kamsnaps #plasticsnaps #snapping #itsasnap  #babybib #babybibpattern #droolerbibpattern #droolerbib #bibs #bibpattern #babygifts #babylove #christmasidea #gift #christmasgift

An I Like Big Buttons Christmas! Idea #20: Making a Crayon Roll with KAM Snaps December 19 2017

Gift Idea #20:

Make a Crayon Roll for the crafty child in your life. Perfect for on the go coloring!

Making a Crayon Roll with KAM Snaps

Supplies:

• 3 12"x6" Pieces of Fabric
• 1 12"x6" Piece of Interfacing
• 2 KAM Snap Sets
• KAM Snap Pliers and Awl
• Standard Sewing Machine See More

#ilikebigbuttons #shopilikebigbuttons #kamsnaps #plasticsnaps #snapping #itsasnap  #crayonholder #christmasidea #crayonroll #gift #christmasgift

An I Like Big Buttons Christmas! Idea #19: Making a Snow Queen Inspired Costume with KAM Snaps December 19 2017

Gift Idea #19:

If you have little girls in your life who are obsessed with Frozen and Elsa as my little ones are this may be the gift for you. :)

Supplies:

• 1 Yard of Snow Queen Snowflake Organza
• 1 Yard of White Fabric
• 1 Yard of Tulle (White)
• 4 Sheets of Felt (White)
• Silver Sequined Ribbon
• Teal thread
• 4 KAM Snap Sets
• KAM Snap Pliers and Awl
• Serger Sewing Machine
• Standard Sewing Machine
• Long Sleeve T-Shirt (we went with White) See More

#ilikebigbuttons #shopilikebigbuttons #kamsnaps #plasticsnaps #snapping #itsasnap  #everythingtinyiscuter #christmasidea #snowqueen #elsadress #frozen #elsa #anna #gift #christmasgift

An I Like Big Buttons Christmas! Idea #18: How to make a Mini Hobo Purse with KAM Snaps and a PDF Pattern December 18 2017

Gift Idea #18:

I am making a Mini Hobo Purse with KAM Snaps for my mini fashionista :P.  There is sure something about miniaturizing any project that makes it even cuter!  I hope you like it as much as I do.

Making a Mini Hobo Purse with KAM Snaps and PDF Pattern

Supplies:

• Fabric or Fabrics of your choice
• Interfacing
• 1 KAM Snap Set
• KAM Snap Pliers and Awl
• Mini Hobo Purse PDF Pattern
• Standard Sewing Machine and Iron See More

#ilikebigbuttons #shopilikebigbuttons #kamsnaps #plasticsnaps #snapping #itsasnap #minihobopurse #freepdf #hobopurse #everythingtinyiscuter #christmasidea #gift #christmasgift

An I Like Big Buttons Christmas! Idea #15: KAM Snap Felt Christmas Ornaments December 15 2017

Gift Idea #15:

Today I am making some child-proof Christmas ornaments with KAM Snaps.  With lots of little helping hands in my house, our Christmas tree needs some durable and cute ornaments.  These ornaments remind me of ones my mom and dad had on our tree in our curious stages :).  KAM Snap Felt Christmas Ornaments to the rescue!!!

Supplies:

• A couple Sheets of Colored Felt
• KAM Snap Caps and Sockets or Studs
• KAM Snap Pliers and Awl
• Standard Sewing Machine
• Scissors See More

#ilikebigbuttons #shopilikebigbuttons #kamsnaps #plasticsnaps #kamsnapornaments #homeaccents #homedecor #christmasidea #gift #christmasgift

An I Like Big Buttons Christmas! Idea #11: How To Make A Cuff Bracelet with Upcycled Jeans and KAM Snaps December 11 2017

Gift Idea #11:

A great gift from unsalvageable jeans is a cute Upcycled Cuff Bracelet. If you are like us, you have a ready stack of holey jeans that are waiting for a new purpose.

Upcycled Jean Cuff Bracelet with KAM Snaps

Supplies for an Upcycled Jean Cuff Bracelet:

• 1 Pair of Holey Jeans
• 2 KAM Snap Sets
• KAM Snap Pliers and Awl
• Standard Sewing Machine ... See Full Tutorial

Upcycled Jean Cuff Bracelet with Embroidery and KAM Snaps

Supplies for an Upcycled Jean Embroidered Cuff Bracelet:

• 1 Pair of Holey Jeans
• 2 KAM Snap Sets
• KAM Snap Pliers and Awl
• Standard Sewing Machine ... See Full Tutorial

#ilikebigbuttons #shopilikebigbuttons #kamsnaps #plasticsnaps #snapping #itsasnap #christmasidea #gift #christmasgift

 

An I Like Big Buttons Christmas! Idea #10: How to Make a Hanging Kitchen Towel with KAM Snaps December 08 2017



Gift Idea #10:

Hanging Kitchen Towels are easy to make, functional, and add a nice punch of color to any kitchen. 

Supplies:

• 1 Tea or Kitchen Towel
• 4 KAM Snap Sets
• KAM Snap Pliers and Awl

Instructions:

1.   My towel is 12" wide so I decided to do 4 sets of KAM Snaps to make sure the towel doesn't sag.  With a ruler and a marker, I marked 1/4" down x 1" in on each corner and then 3" over from each corner mark. See More

Pin for Later: https://www.pinterest.com/pin/201184308328848275/

#ilikebigbuttons #shopilikebigbuttons #kamsnaps #plasticsnaps #kitchengear #kitchenideas #snapping #itsasnap #christmasidea #gift #christmasgift

An I Like Big Buttons Christmas! Idea #9: How To Make Pacifier Clips December 07 2017

Gift Idea #9:

Pacifier Clips are easy to make, fun to embellish, and a great useful gift for a new mom and baby.

Supplies:

• Pacifier with Button Style Grip
• 14" x 3 1/2" Piece of Fabric
• 1 Pacifier Clip per Clip
• 2 KAM Snap Sets per Clip
• KAM Snap Pliers and Awl
• MAM Ring and O-Ring Button Style Adapters
• Standard Sewing Machine and Iron

Instructions:

1. Choose a piece of Fabric, cut it to the dimensions: 14" x 3 1/2", the finished product once ironed, folded and sewn will be approximately 7/8" wide x 12" long. [...]

#ilikebigbuttons #shopilikebigbuttons #kamsnaps #plasticsnaps #pacifiersupplies #pacifierclips #nosew #buttonstylepacifiers #craftsupplies #babygifts #christmasgifts #christmasideas #babysfirstchristmas

Here are our top 5 Pacifier Clip Tutorials:

#1 - A Cover Button Metal Pacifier Clips with Cover Buttons, Round Faced Metal Suspender Clips, and KAM Snaps

#2 - Jean Pacifier Clip with Rosette using KAM Plastic Snaps and Clip

#3 - "No Sew" Pacifier Clip with KAM Snaps, MAM Ring or O-Ring and a KAM Plastic Pacifier Clip for Button Style Pacifiers

#4 - Fabric Pacifier Clip with KAM Snaps, MAM Ring or O-Ring and a KAM Plastic Pacifier Clip for Button Style Pacifiers

#5 - Recycling Jeans into a Pacifier Clip using KAM Snaps and a Pacifier Clip

An I Like Big Buttons Christmas! Idea #7: How to make a Bandana Bib with KAM Snaps and a PDF Pattern December 05 2017

Gift idea #7:  One of our most popular tutorials, Bandana Bibs are a great gift for those little droolers and mess makers in your life or as an outfit accessory. So cute!  I, also, used our Heart Shaped KAM Snaps for added pizazz, check it out!

Supplies:

• Fabrics of your choice
• 1 Heart Shaped KAM Snap Set
• KAM Snap Pliers and Awl
• Bandana Bib PDF Pattern (may need to adjust for your child's size or add more KAM Snaps settings)
• Standard Sewing Machine

Instructions:

1. Download the Bandana Bib PDF Pattern.  Print out the pattern making sure the 1″ square in the corner measures 1″ square when printed that will indicate the pattern is the right size.  ... See More

An I Like Big Buttons Christmas! Idea #3: Five Ways To Make Key Fob Hardware Wristlets November 22 2017

Gift idea #3:  Key Fob Hardware Wristlets are a great useful and personal gift to give.  Key Fob Hardware is simple to use and produces amazing results.  Just add your fabric, ribbon, webbing, or embroidery for an instant, elegant wristlet.  Check it out!

Five fun and simple tutorials:

1. Fabric and Cotton Webbing Wristlet
2. Ribbon and Cotton Webbing Wristlet
3. Making a Smart Phone Case with Wristlet using Key Fob Hardware, KAM Snaps and PDF Pattern
4. Making an Embroidered Key Fob Hardware Wristlet
5. Fabric Key Fob Hardware Wristlets

See More

#ilikebigbuttons #keyfob #keyfobwristlets #christmasideas #shopilikebigbuttons #wristlets #fobs

An I Like Big Buttons Christmas! Idea #1: How To Make Unpaper Towels with KAM Snaps November 14 2017

Only 41 days until Christmas, how did that happen !?!

Gift Idea #1

An I Like Big Buttons Christmas! Idea #7:  3 Ways To Make Unpaper Towels with KAM Snaps:  Unpaper towels make a great, attractive, and functional gift for your loved ones.  We have 3 easy tutorials that show you how to make them.  Standard Sewing Machine, Serger, or "No Sew" just pick your skill level and you can have these decorative and functional unpaper towels in your kitchen.

Supplies:

• 12 11"x11" Flannel squares
• 12 11"x11" Terry Cloth or Micro Fiber squares
• 72 KAM Snap Sets
• Rotary Cutter or Scissors
• Cutting Mat
• Serger
• KAM Snap Pliers and Awl

Instructions:

1. Choose your flannel, I went to Etsy, of course, and found almost too many choices :).  I finally settled on Moda's Marmalade collection.  See More

#ilikebigbuttons #kamsnaps #plasticsnaps #unpapertowels #christmasideas #shoplikebigbuttons #christmascountdown #christmastime #gifts #christmasgifts

© ILikeBigButtons.com and I Like Big Buttons Blog, 2017.

Our 5 Most Popular KAM Plastic Snap Tutorials For Babies & Toddlers - I Like Big Buttons! September 12 2017



KAM plastic snaps are a SNAP to use and work almost anywhere Velcro or sewable button can be used. Here are some great Baby and Toddler KAM plastic snap tutorials from our KAM Plastic Snap Project Page!

#1 - Bib Bandana with KAM Plastic Snaps and a PDF Pattern

#2 - Sensory Ribbon Baby Tag Blanket with KAM Plastic Snaps and Pacifier Supplies

#3 - The Ultimate Catch-All Bib with KAM Plastic Snaps

#4 - “No Sew” Leash for a Toddler Cup with KAM Plastic Snaps

#5 - A Cover Button Metal Pacifier Clips with Cover Buttons, Round Faced Metal Suspender Clips, and KAM Plastic Snaps

Save

I Like Big Buttons! How To Apply KAM Plastic Snaps With Hand Pliers August 28 2017

How To Apply KAM Plastic Snaps With Hand Pliers Slideshow:

OR

How To Apply KAM Plastic Snaps With Hand Pliers Video:

Today I spent the day laying out a photo slideshow of how to apply KAM plastic snaps with hand pliers. Installing snaps is, well, a SNAP to do! Check out how simple it is below.

Supplies:

• KAM Snap Pliers and Awl
• 1 Complete KAM Plastic Snap Set (2 Round Caps, 1 Studs, and 1 Socket)
• Scrap of Fabric or Sewing Project

 

1. Use the Awl to poke a hole where you want to install the KAM plastic snap.

2. Press the plastic snap Cap through the hole created by the Awl. The prong of the Cap will be visible.

3. Settle the Socket over the prong shaft.

4. Use the Hand Pliers to install the Cap and Socket together.

5. The Cap should be securely nestled in the die before you apply pressure. I am using Size 20 snaps so the T5 die is installed. Each size of snap has a correlating die.

6. Apply firm hand pressure. The rubber head should bulge slightly as pictured.

7. The prong of the Cap is now flattened. When formed, the prong will compress and form a 'mushroom' shape to hold the Cap and Socket together.

8. Repeat steps to create the Stud side of the snap. Create a hole with the Awl and insert the Cap. The prong of the Cap will be visible.

9. Settle the Stud over the prong shaft.

9. Use the Hand Pliers to install the Cap and Stud together.

10. Apply firm hand pressure. The rubber stopper should bulge slightly.

11. The prong of the Cap is now flattened. When formed, the prong will compress and form a 'mushroom' shape to hold the Cap and Stud together.

12. Now simply press the snaps sides together.

13. You have created a plastic snap that is durable, functional, and adds a colorful finish to your project.

 

14. Both sides of your snap have a clean finished look.

15. Happy Snapping!!!

Save

Our 5 Most Popular Pacifier Clip Tutorials - I Like Big Buttons! August 15 2017

Pacifier Clips are easy to make, fun to embellish, and a great useful gift for a new mom and baby. Here are our top 5 Pacifier Clip Tutorials:

#1 - A Cover Button Metal Pacifier Clips with Cover Buttons, Round Faced Metal Suspender Clips, and KAM Snaps

#2 - Jean Pacifier Clip with Rosette using KAM Plastic Snaps and Clip

#3 - "No Sew" Pacifier Clip with KAM Snaps, MAM Ring or O-Ring and an KAM Plastic Pacifier Clip for Button Style Pacifiers

#4 - Fabric Pacifier Clip with KAM Snaps, MAM Ring or O-Ring and an KAM Plastic Pacifier Clip for Button Style Pacifiers

#5 - Recycling Jeans into a Pacifier Clip using KAM Snaps and a Pacifier Clip

SaveSaveSave

Friday Fun Facts - The Anatomy Of A KAM Plastic Snap July 28 2017

KAM plastic snaps are wonderful. They are a SNAP to install and much easier and durable than a standard metal snap or sewable button.  They come in a multitude of colors and sizes.  Which one is right for you?

Here is a simple tutorial on the anatomy of a plastic snap set. There are 4 parts to a set:

• 2 Caps (Before installation they resemble a tack with a Round, Heart, or Star shaped head. They give a neat finished look to your snap.)
• 1 Socket (The female part with the larger raised circle that the stud (male part) fits into)
• 1 Stud (The male part with the smaller raised circle that fits inside the socket (female part))

SIZE 20:

• Size 20 (0.5" - 12.4 mm) snaps can be used for most general projects like baby diapers and clothing. They are our most popular plastic snap size, have the largest color variety, and have a good strong hold. We carry them in all 130 colors and clear.
• Standard Size 20 snaps have a 5.6mm prong length. Prong length refers to the length of the shaft on the backside of the Cap. When formed, the prong will compress and form a 'mushroom' shape to hold the Cap and Socket or Stud together.
• We also offer Long Prong Size 20 (0.5" - 12.4 mm) in a rainbow of colors. They are great for embroidered key fobs using Marine or Glitter Vinyl as well as other projects where you need just a little more prong length. Long Prong Size 20 snaps have a 6.2mm prong length.

 SIZE 16:

• Size 16 (0.4" - 10.2 mm) snaps are most commonly used for baby and toddler clothing, pacifier clips, mama pads, and small crafts. We carry them in our first 60 ("B") colors and clear.
• Size 16 snaps have a 4.2mm prong length. Prong length refers to the length of the shaft on the backside of the Cap. When formed, the prong will compress and form a 'mushroom' shape to hold the Cap and Socket or Stud together.
• The Size 16 Socket and Stud are less noticeably different. Many first time users don't immediately see the distinction. The Socket's raised circle is the larger of the two pictured, and the Stud's raised circle is smaller and inserts into the Socket (female) side.

SIZE 14:

• Our Size 14 (0.35" - 9.7 mm) snaps can be used in most applications where Size 16 snaps are used. We carry them in White and Black at this time.
• Our Size 14 snaps have a 5.0mm prong length. Prong length refers to the length of the shaft on the backside of the Cap. When formed, the prong will compress and form a 'mushroom' shape to hold the Cap and Socket or Stud together.
• As with the Size 16, the Size 14 Socket and Stud are less noticeably different. The Socket's circle is the larger of the two pictured.  The Stud's circle is smaller and inserts into the Socket (female) side. Size 16 and Size 14 Sockets and Studs are the same; only the cap differs.

SIZE 19:

• Size 19 (0.475" - 12 mm) snaps are used for heavy duty applications requiring a strong grip. They are often used with tote bags, coats, tarps, and upholstery. We carry them in White and Black at this time.
• Size 19 snaps have a 6.9mm prong length. Prong length refers to the length of the shaft on the backside of the Cap. When formed, the prong will compress and form a 'mushroom' shape to hold the Cap and Socket or Stud together.
• The Size 19 Socket and Studs are larger, but similar in appearance to Size 20 Sockets and Studs.

SIZE 22:

• Size 22 (0.55" - 14.1 mm) snaps are used for heavy duty applications requiring a strong grip. They are often used with tote bags, coats, tarps, and upholstery. We carry them in White and Black at this time.
• Size 22 snaps have a 6.9mm prong length. Prong length refers to the length of the shaft on the backside of the Cap. When formed, the prong will compress and form a 'mushroom' shape to hold the Cap and Socket or Stud together.
• The Size 22 Socket and Studs are larger, but similar in appearance to Size 20 Sockets and Studs.

SaveSaveSaveSaveSaveSaveSave

I Like Big Buttons! Adjustable Elastic Headband With Interchangeable Shabby Flowers July 27 2017



Today, I am making a Adjustable Elastic Headband with Interchangeable Shabby Flowers.  It is super easy to do and adorable on both babies and big ;) kids alike.

Supplies for Adjustable Headband:

• 1 set of headband ring and slider
• 24" length of 5/8" Elastic for headbands
• Glue of your choice: Fabric Tac or Hot Glue
• Lighter or Chef's Torch

Supplies for Shabby Flower Embellishment:

• 2" Shabby Flowers of your choosing
• 1/2" x 1" square of Coordinating Felt
• 1 1/2" Circles of Coordinating Felt
• Glue of your choice: Fabric Tac or Hot Glue
• Coordinating Size 20 KAM Snaps

Adjustable Elastic Headband:

Instructions:

1.  Cut your Elastic to 24" length and heat seal the ends with the Lighter.  Be careful to just seal the ends, not start them on fire :).  (You may want to practice on a scrap piece if this is your first time.)

2.  Take your 24" length of Elastic and feed the decorative/shiny side of the Elastic up through the first loop in the Slider over the bar and back down through the second loop in the Slider.

3.  Pull the Elastic until it is about 3/4" sticking out the bottom of the second loop of the Slider.

4.  Flip the Slider over so that the wrong sides of the Elastic is face up, this is the bottom of the Slider.  Put a dab of glue on the Elastic and press the 3/4" of Elastic to it firmly.  Wiping away any excess glue.

5.  From the opposite side, slide the single Slider Loop about half way on to the Elastic.

I Like Big Buttons! Friday Fun Facts: How We Prepare Our Plastic Snaps And Why June 30 2017

For all our new friends and followers of I Like Big Buttons!, it seemed like a great time to introduce you to our amazing Plastic Snaps!!!  For those of you who have been with us for a long time, here is a refresher.

We carry a variety of package deals for our snaps from 10 sets, 25 sets, 100 sets up to thousands of KAM snaps with and without pliers or professional press all at a great price. We have a listing for just about everyone at the price range and quantity you desire.

Unlike other vendors, our KAM plastic snaps are optically counted.  This means every cap, socket, and stud is counted, and the amount purchase is assured to be at or above the purchased quantity (we allow overcounts, but not undercounts).  Plastic snap batches can vary by 5% or more in weight (even between batches of the same color), so if your vendor is weighing them, you may not be getting what you paid for.

25 packs sets came to be largely for cloth diapers.  Most customers that replace Velcro on cloth diapers with snaps have numerous diapers in varying colors.  Many found purchasing 100 of each color wasteful, as they ended up with 75% of their snaps left over.

We provide the best of both worlds, smaller packs to those that want greater variety and larger packs for those looking to use snaps in bulk.

Some of these reasons we offer these great options include:

*A large demand from customers for just 25 snaps to convert or complete a single diaper.

*An equally large demand for “just a sampling of every color”, which gave birth to our sets of 10 and Starter Packs.

* More compact, informational packaging that includes the name, quantity, prong length, and instructions about which Die and Rod to use.

* We also offer individual parts in quantities of 100 and 1000 in all of KAM Plastic Snaps 130+ colors.

If you aren't sure how to jump into plastic snaps, we also carry starter packs including multi-packs of 10 or 25 sets of snaps.  If you are new to snapping, we have starter packs with plastic snap pliers, awl, and an instructional DVD.  These Starter Packs are a great way to get addicted :).  We have 18 preset themes including Rainbow Spectrum, Pastel Spectrum, Vibrant Boy, Vibrant Girl, Patriotic, Military, and many others. 

Check out our convenient Starter Packs:

We also offer an option to choose your own colors.  You can pick from any of KAM Plastic Snaps 130+ fun colors. Have you taken a moment to check out our new easy to navigate KAM Snap Visual Ordering Chart with new lower pricing!?!

Here is our chart of available colors, we carry over 130+ great KAM Plastic Snap colors.

Save

Friday Fun Facts - What is your Shipping and Handling turn around? June 23 2017

We often get questions from our customers about our shipping and handling time. We have it posted on our site, but here it is for your convenience.

"Orders purchased before 3pm Pacific time are typically prepared for shipment the following business day in our 9am pickup."

Here are some reviews of our shipping from our happy customers:

★★★★★ Super fast shipping as always!! I can't stop making these buttons!!

★★★★★ Perfect, super sonic shipping, A+++ seller!

★★★★★ Great customer service, expedient delivery, excellent communication. Product exactly as described. Will use this shop again for sure.

★★★★★ aS ADVERTISED AND VERY FAST SERVICE!

★★★★★ Wow Super Fast Shipping!! Totally impressed and will definitely order again!! Great product!

★★★★★ Super fast shipping! Thanks!!

★★★★★ Excellent Lightning Fast Shipping I totally appreciate that and product is terrific I highly recommend this shop!!

★★★★★ thank you for super quick shipping Thank you.

★★★★★ Once again I am very happy with these snaps! You absolutely can't beat the price or the color options here and the shipping is so fast!

★★★★★ Perfect item. Fast shipping. Smooth Sailing.

★★★★★ I love using the KAM snaps. The really prompt shipping from "I like big buttons" was surprising. I ordered one day and shipped the same day. Got them the next day. I will be shopping with them again soon.

★★★★★ lightning fast shipment, above quality snaps

★★★★★ Great Items....can't wait to use them. Thanks for the fast delivery.

★★★★★ AMAZING service. Shipped out the next day. Had in 2 days! Will definitely be doing business with this company again! Thank you so much!

★★★★★ great merchandise and fast shipping makes buying easy

★★★★★ Everything was great. Shipped faster than expected and packaging was more than expected.

★★★★★ Perfect and super fast shipping!

★★★★★ They got here days before estimated arrival time.

★★★★★ This is a repeat buy. I reordered because they have the products I want at a good price. Quick delivery!

★★★★★ Quick shipping and an excellent price.

★★★★★ QUICK DELIVERY...EXACTLY WHAT I WANTED..THANK YOU

As always, there are exceptions to these customers reviews. We, just like our customers, are at the mercy of the US Postal Service, but on a whole, more than 99% of the time, they serve us well. We love our local US Postal workers who make shipping your packages a delight. If your purchase is taking longer than you had hoped, please feel free to contact us.

Thank you,

Gena (CEO of ILikeBigButtons.com)

SaveSave

I Like Big Buttons! Product Video: What We Carry June 22 2017



Check out ILikeBigButtons.com - A family-run craft supply shop with a large variety of plastic KAM Snaps & accessories, Key Fob Hardware, Cover Buttons, Pacifier Supplies, Metal Findings and more! We are constantly expanding our selection of crafting supplies for you.

Cover Button Embellished Pacifier Clips by I Like Big Buttons! May 30 2017

I have had a lot of questions in the last couple years about how to make these clips so I decided to take it on. A Pacifier Clip made extra adorable with the added Cover Button accent, they are a great accessory to add to your baby's wardrobe for any special occasion or just because.

Supplies:

• 2 KAM Snap Sets
• KAM Snap Pliers and Awl
• Round Faced Metal Clips or Enamel Pacifier Clips
• 1 Size 36 Flat Back Cover Button
• Size 36 Assembly Tool
• Size 36 Template
• Fabric Scraps
• E6000 Adhesive
• Pre-made Pacifier Clips (see Pacifier Clip and Supply Tutorials)

Instructions:

1.  Using our Pacifier Clip and Supply Tutorials make either Ribbon or Fabric Pacifier Clips.

2.  Cut your fabric scrap. You will want a circle that is about twice the diameter of your button blank.  I cut out a Piece of Fabric using my Size 36 Template.

3.  Put your fabric piece in the larger assembly tool piece (RIGHT SIDE DOWN). When you look into the tool you want to see the back of the fabric.

4.  Place the button front (the domed piece) on top of the fabric. Leave the fabric edges hanging out.  Double check the transparent underside to see if your print is how you would like it.   Then press the cover button fabric edges down into the tool.

5.  Add a dab of E6000 Adhesive to the middle of the cover button cap before installing the Flat Back.

6.  Place the back cover button piece on top of your fabric and button front.

7.  Take the smaller piece of the assembly tool and with the open side down place it on the button back.

8.  Press down. You may hear a pop when the last bit of the button back slips into place. If you take the tool out and the button is not completely secured, just put it back in and press down again.

9.  When you take the small assembly tool piece off, the fabric edges will be secured underneath the button back.

10.  Remove the button from the larger assembly tool piece.  Tada!  My Cover Button is ready to be adhered to a Round Faced Metal Clip.

11.  Here a the Cover Buttons I made in just a few minutes.  Seriously easy, fun and so cute!

12.  Now take the E6000 Adhesive and put a medium size dab of glue on the back of the Cover Button about 1/2 of what would fill the back area of the back.  This glue is great to work with so don't overly worry about getting the amount just right.  I was able to cleanly wipe of any excess off when I put on too much and I was also able to remove the button and add a little more when I under did it.  This glue is very forgiving.

13.  Now place the Cover Button over the Round Faced Metal Pacifier Clips and straighten and center your button.

14.  Press firmly and let set to dry and cure 24-72 hours as recommended by the manufacturer (E6000).

15.  These are my finished products.  I love them and think they turned out beautifully.  Below are my examples, completed and installed on Pacifier Clips.

 

16.  Tada!!!

Disclaimer:  Keep in mind that although I have rough tested these I in no way recommend you leave your baby alone with these as there are small pieces and if not done properly they may come apart and become a choking hazard.  I would recommend these clips under adult supervision only.  The maker and/or parent assumes full responsibility when using these pacifier clips.

SaveSaveSaveSave

Bandana Bib with KAM Snaps and a PDF Pattern by I Like Big Buttons! May 18 2017

 

 

One of our most popular tutorials, Bandana Bibs are a great gift for those little droolers and mess makers in your life or as an outfit accessory. So cute!  I, also, used our Heart Shaped KAM Snaps for added pizazz, check it out!

Supplies:

• Fabrics of your choice
• 1 Heart Shaped KAM Snap Set
• KAM Snap Pliers and Awl
• Bandana Bib PDF Pattern (may need to adjust for your child's size or add more KAM Snaps settings)
• Standard Sewing Machine

I Like Big Buttons! How To Repair a Bra with KAM Plastic Snaps March 28 2017

Today, I tackled a problem for us moms out there.  Or at least ;) those of us too busy to fish our bras out of the washer before they go in the dryer.  In all fairness to my mom, she has told me a number of times, they will last longer and work better if I air dry them.  The fact remains that if I remember to get the laundry from the washer to the dryer in the same day, I consider it a miracle :).

Besides wearing them out quicker, I have found that front loading machines like to grab the bra hooks and mangle them.  I have grown tired of the hooks poking me in the back or not hooking at all anymore.

I have now modified all my bras, I find the KAM Snap closures easier to snap and release. Quicker to put on, quicker to get off with a good strong hold.

KAM Plastic Snaps to the rescue with a seam ripper and just a couple snaps... See the picture tutorial below.

Supplies:

• Seam Ripper
• KAM Snap Pliers and Awl
• 3 KAM Snap Caps, 2 Studs, and 1 Socket

1.  Use a Seam Ripper to remove the stitches holding the Bra hooks in place.

2.  Once the hooks are removed, use the Awl to poke a hole where you want to install the snap.  I used a KAM Snap Cap and Socket on this side.

3.  Install the snap.

4.  I put 2 sets on the back strap for size adjustment, you could do 3 if you wanted.   I used a 2 KAM Snap Caps and 2 Studs on this side, and spaced them evenly.

5.  Tada!  Success, I am wearing it as I type.  It is much more comfortable and it was easy to snap, I was concerned considering I had to do it by feel, but it was simple to do.

I Like Big Buttons! Cuff Bracelet with Upcycled Jeans and KAM Snaps February 21 2017

A continuing problem in my house is holey jeans. I keep thinking they might grow out of this particular feature, but just yesterday my middle son walked up to me and turned around. He laughed as he relayed how he fell, but caught himself on a cabinet. Which as he wiggled his fingers through the seat of his pants, had snagged his pants in the seat leaving a gaping hole. Oh bother! When he twisted back around, I couldn't help, but note that it wasn't these pair of jeans first or second hole. The knees were completely split out.

I gave him permission to make his stuffed animals outfits out of the jeans, one of his favorite past times. Another great project for unsalvageable jeans is a cute Upcycled Cuff Bracelet, see the details below.

Upcycled Jean Cuff Bracelet with KAM Snaps

Supplies for a Upcycled Jean Cuff Bracelet:

• 1 Pair of Holey Jeans
• 2 KAM Snap Sets
• KAM Snap Pliers and Awl
• Standard Sewing Machine ... See Full Tutorial

Upcycled Jean Cuff Bracelet with Embroidery and KAM Snaps

Supplies for a Upcycled Jean Embroidered Cuff Bracelet:

• 1 Pair of Holey Jeans
• 2 KAM Snap Sets
• KAM Snap Pliers and Awl
• Standard Sewing Machine ... See Full Tutorial

30 Days of KAM Snaps and Beyond!!! Other Great KAM Plastic Snap Craft Ideas! October 17 2016

 

Two great KAM Plastic Snap ideas I received recently from a fellow KAM Plastic Snap lover, Carrie M.!!!

Carseat or Stroller Strap Covers Using KAM Snaps:

Easy to make and functional, no carseat or stroller should be without them!!!

Onesie With Removeable/Interchangeable Bowtie Using KAM Snaps:

Just think of the possibilities!  I love it!  Thank you for sharing, Carrie!!!  We love seeing your creativity and ingenious uses for our KAM Plastic Snaps.

To see our other KAM Plastic Snap tutorials and ideas visit our Projects section on our website.

SaveSave

Unpaper Towels with KAM Snaps and a Serger October 12 2016



I love unpaper towels!!!  Great for cleaning, beautiful to look at and wonderful to give as housewarming or Christmas gifts.  Here is our tutorial for them.

Supplies:

• 12 11"x11" Flannel squares
• 12 11"x11" Terry Cloth or Micro Fiber squares
• 72 KAM Snap Sets
• Rotary Cutter or Scissors
• Cutting Mat
• Serger
• KAM Snap Pliers and Awl

Instructions:

1.  Choose your flannel, I went to Etsy, of course, and found almost too many choices :).  I finally settled on Moda's Marmalade collection.

2.  Choose your Terry Cloth, I went with a mix of White, Butter, and Celery colored Terry Cloth that matched my flannel.  Some peopel use towels and cut them into pieces, I also have used Micro Fiber clothes from Walmart they are bigger than 11"x11" and work great.  I also find them on clearance pretty often too which makes them reasonable.

3.  Cut 12 11"x11" Flannel squares and 12 11"x11" Terry Cloth squares.  Make sure to make cut them as square as possible.

4.  Pick a square of Flannel and a square of Terry Cloth, place the wrong sides together and serge the pieces together.  There are some great Youtube videos on how to turn corners when sergering and how to end stitch.

5.  Repeat 12 times.

6.  I straight stitched a diagonal line from one corner to the adjacent corner and repeat on the opposite side.  This insures they will not bunch up when you wash them or are using them.

7.  I then made a template with clear plastic.  It was 1"x 11" and I punched 3 holes: 1 at 1/2" down and 1/2" in, 2 at the other end same 1/2" up and 1/2" in, and the 3rd exactly in the middle of the 2 holes 1/2" in.  You can do 2 holes but the 3rd hole keeps the Unpaper Towels from sagging in the middle.

8.  Then I marked with a super fine tipped permanent marker where to place the snaps holes.

9.  Using the Awl, I punched holes for all the snaps 3 on each side, 6 per towel.

10.  Now install the KAM Snaps, in each hole, I recommend doing all the ones on the left first and then all the ones on the right.  I found that I get mixed up otherwise and have to undo my hard work.  So I did KAM Snap Caps down (Terry Cloth) on the left with the studs face up (Flannel side).  Then I did the right side, I did KAM Snap Caps up (Flannel) with sockets down on (Terry Cloth).

11.  Now snap all your towels together, roll them up, and place them on your paper towel holder.

SaveSave

Fabric Pacifier Clip with KAM Snaps, MAM Ring or O-Ring and an KAM Plastic Pacifier Clip for Button Style Pacifiers September 21 2016

Today, I am making a pretty Fabric Pacifier Clip for Button Style Pacifiers using our silicone MAM rings and O-Rings. Pretty functional :)!!!

 

Supplies for a Fabric Pacifier Clip with Button Style Pacifier Adapters:

• Pacifier with Button Style Grip
• 14" x 3 1/2" Piece of Fabric
• 1 Pacifier Clip per Clip
• 2 KAM Snap Sets per Clip
• KAM Snap Pliers and Awl
• MAM Ring and O-Ring Button Style Adapters
• Standard Sewing Machine and Iron

Instructions:

1.  Choose a piece of Fabric, cut it to the dimensions: 14" x 3 1/2", the finished product once ironed, folded and sewn will be approximately 7/8" wide x 12" long.

2.  Fold both 3 1/2" wide ends in 1/4" and iron flat.

3.  Now fold and iron the fabric in half the long way (14" length).

4.  Then fold and iron again, bringing the outer edges to the middle "iron line" and iron along those edges. Repeat on other side.

5.  Re-iron the seam so that the Fabric is smooth and flat, it should now be 13 1/2" long x 7/8" wide.

6.  Open the top of the Fabric strip and trim the excess internal fabric at an angle so that there is less chance of the ends peeking out when sewn together.  Repeat on the other end.

7.  Pin the Fabric strip in a couple places to keep it in place.

8.   Sew a 1/8" seam all the way around the piece making sure to back stitch at the start and finish to set the seam.

9.  Now installed a Cap and Stud about 1/2" from the edge and the mating Cap and Socket about 1 1/2" later so that the center of the two KAM Snap parts are about 1 1/2" or more apart.  Any closer and I found I had trouble getting the MAM Ring or O-Ring Adapter to sit neatly inside.   I used Size 20 snaps for this tutorial but either Size 20 or Size 16 will work great.

10.  Repeat on the other side, that will hold the Pacifier Clip.  I, then, feed the Pacifier Clip and MAM Ring Adapter onto the ribbon and snapped it into place.  It may have been easier to thread on the pacifier clip before installing any Snap parts but I was able to feed it through without much trouble.

11.  Tada!  Now time to add the Pacifier.

12.  Simply stretch the MAM Ring or O-Ring around the Button Style Grip on the Pacifier and it will settle behind it and hold the Pacifier securely. Now snap the Pacifier in place, attach to your child's shirt and go.

13.  As pictured, the MAM Rings hold the same way as the O-Rings only with a less subtle profile.

14.  Tada!  Happy Snapping!!!

Jean Pacifier Clip with Fabric Rosette using KAM Plastic Snaps and a KAM Plastic Pacifier Clip September 19 2016

Every time I do a load of jeans in the laundry, I inevitable find ANOTHER pair of jeans with the knees split from seam to seam and, really, how many jean shorts can a boy use :P.  They even wear though patches and re-enforced knees.  I have active boys :).  I have been trying to find creative ways to recycle holey jeans.  Today I am recycling a pair of holey jeans into a Pacifier Clip.

 

Supplies for a Recycled Jean Pacifier Clip with Fabric Rosette:

• 1 Pair of Holey Jeans
• 1 1/2" to 2" x 24" long strip of Fabric
• 1 KAM Plastic Pacifier Clip
• 1 KAM Snap Sets
• KAM Snap Pliers and Awl
• Sewing Clips
• Standard Sewing Machine
• Hot Glue Gun
• Fabri-Tac - Fabric Adhesive

Instructions:

1.  Using an old, holey pair of Jeans cut two 1 1/2" x 14" strips of material.

2.  Use Sewing Clips to hold the material, wrong sides together, right sides facing out.

3.  Stitch around the strip of fabric about a 1/4 to 3/8" in all the way round making sure to back stitch at the start and end.

4.  Pull on the edges to fray the jean material up to the stitch you made.  I used a crafty child :) with a cutting board and a fork.  It will also fray over time but I was going for a this look.

5.  To make the Fabric Rosette, fold the fabric in half, wrong sides together, two times.  You will end up with about 1/2" or less strip of fabric 24" long.  I used an iron to fold it, not so much that it was completely flat, just enough that it held its shape.  Start at one end and hot glue the first bit of it back against itself.

6.  Continue this ever so often so that the 'bud' stays together.

7.  I made the bud or center of the rose about 1/2" in diameter.  Add one last drop of hot glue.

8.  Now twist the fabric 360 degrees, so that the bottom becomes the top.  Tack it with a small bead of hot glue and repeat.

9.  Continue twisting and gluing until you run out of fabric or until you reach the desired size of your rosette.

10.  It will look like this when you are finished.

11.  Glue the last bit of fabric on the underside of the Rosette securely with hot glue.

12.  For a more finished look, I added a circle of felt to the bottom with Fabri-Tac.

13.  Put the KAM Plastic Pacifier Clip on the Fabric strip about 1″ in.

14.  Fold back 1″ of the strip back onto itself.

15.  Straight stitch across the fabric strip just behind the KAM Plastic Pacifier Clip.  Make sure to set the stitch.

16.  Make sure that the internal snap in a comfortable distance to accommodate the width of the handle, I spaced my KAM Snaps about 2″ apart using the Pacifier I have with the biggest handle.

17.  Now on the side where the Pacifier will be attached, I installed a Cap and Socket about 1/2″ from the edge.  I used Size 20 snaps for this tutorial but either Size 20 or Size 16 will work great.

18.  Add Fabric Rosette with Fabri-Tac to the Pacifier Clip just above the clip.

19.  Now snap the Pacifier in place, attach to your child’s outfit and go.

20.  Tada!  Okay, I think I am in love.  Super cute!  Happy Snapping!!!  To see our other great Pacifier Clip Tutorial and KAM Plastic Snap Ideas and buy these supplies visit I Like Big Buttons.com.

Disclaimer:  Keep in mind that although I have rough tested these I in no way recommend you leave your baby alone with these as there are small pieces and if not done properly they may come apart and become a choking hazard.  I would recommend these clips under adult supervision only.  The maker and/or parent assumes full responsibility when using these pacifier clips.

I Like Big Buttons! Creation Share August 25 2016

Edit website SEO tons.com, for your craft supplies and hand tool. I figured it out...Easy Peasy! Dollar store hand towel and 3 snaps. Awesome. Fun. Quick." So grateful for the support of my family, my husband, my kiddos and my great ILikeBigButtons! customers and fans!!! Would love to see your I Like Big Buttons! creations too! Post them to our I Like Big Buttons! Group so we can all enjoy! IMG_1378 Don't forget to enter!!! ILikeBigButtons.com is sponsoring a Professional KAM Plastic Snap Press Giveaway! Just 4 days left to enter! TO ENTER TO WIN and Liking, Commenting, and Sharing our Facebook Post for this Giveaway. DK-98-Coral-White-Background #ilikebigbuttons #ilikebigbuttonsfans #ilikebigbuttonscreations #kamsnaps #plasticsnaps #win #giveaway #kamsnappress

Free Romper Pattern {0-12 months} - Courtesy of Nap-Time Creations and I Like Big Buttons! KAM Plastic Snaps August 11 2016

A while back, Emily of Nap-Time Creations made this sweet Romper and shared how she did it with us.  I thought you all would enjoy seeing it.

Supplies:

• Fabric of your choice for the outside
• 6 KAM Snap Set
• KAM Snap Pliers and Awl
• 1/4" Elastic
• Standard Sewing Machine
• Romper Pattern & Full Tutorial

Pattern NOTES {READ FIRST!}

1. I made the 6-9 month romper and it wasn’t very long. {new pattern has updated length included… you can always add length at dotted line on pattern.

2. You will need 3/4 of a yard fabric, 1/4″ Elastic and 6 snaps. I used KAM snaps...

To read the rest of the Tutorial, go here.

Perfect Bow and Baby Proof Sash Tutorial - Courtesy of Pattern Revolution and I Like Big Buttons! KAM Plastic Snaps August 02 2016

A while back, Robin of Pattern Revolution made this super cute Perfect Bow and Baby Proof Sash and shared how she did it with us.  I thought this would be a great time to revisit the tutorial as fall approaches.

Supplies:

• Sash and Bow Fabric
• Thread
• Sewing Machine
• Scissors or Rotary Cutter
• Needle
• KAM Snaps
• KAM Snap Pliers and Awl
• Perfect Bow and Baby Proof Sash - Full Tutorial

Every morning it is a struggle to dress my feisty 2 year old. All her pretty sashes hang untouched in the closet, while the dresses they go with get worn over and over. I love the look of a pretty bow, but my baby wont hold still long enough to tie it nicely, and in the miraculous event that she does, she unties it and removes the sash a few minutes later. GRRRR!!! Tell me I'm not the only one with this problem???

Decisions, decisions....

First, you need to determine your sash length and width. Measure your child's waist while wearing the garment, add 2" for sash length.  Decide how wide you want the sash, double that and add 1/2". Cut your sash.

Then, you need to determine the bow width and tail length that you like...

Glimpses of the Perfect Bow and Sash Tutorial, to see it in full.

Save