News

How to make Cover Button Paper Clips/Bookmarks with I Like Big Buttons! DIY Kit March 21 2022

Here is what you will receive a DIY Cover Button Jumbo Paper Clip KIT from ILikeBigButtons.com. Just a few quick steps to make a gift for the booklover in your life!

How to make Cover Button Bookmarks here.

How to make Cover Button Barrettes with I Like Big Buttons! DIY Kit March 15 2022

How to make Cover Button Barrettes with I Like Big Buttons! DIY Kit

Here is what you will receive a DIY Cover Button Barrette KIT from ILikeBigButtons.com. Just a few quick steps to make a fun accent for any outfit or gift for a loved one!

How to make Cover Button Badge Reels with I Like Big Buttons! DIY Kit March 10 2022

Here is what you will receive a DIY Cover Button Badge Reel KIT from ILikeBigButtons.com. Just a few quick steps to make a fun accent for any nurse, teacher, or work ID or gift for a loved one!

See Cover Button Badge Reel Pictorial Here.

Pack An Order With Us @ ILikeBigButtons.com January 31 2022

I thought you might enjoy a glimpse inside the order preparation and shipping process at ILikeBigButtons.com -- This order was a fun one! 50+ crafty items in a variety of finishes and sizes. Cover Button DIY Kits, Badge Reels, Flat Back Cover Buttons, Template & Tools, Key Fob Hardware, Barrettes & Bobby Pins, & Wire Back Cover Buttons! Oh My! You all like to keep me on my toes!

Shop with confidence!

Where to find us:

Thank you for your interest! Have a great crafty week!

I Like Big Buttons and crew!

Christmas Gift Idea #2: Key Fob Wristlets @ ILikeBigButtons.com December 02 2021

Supplies:

1.  Cut an 11" section of Cotton Webbing and Fabric strip, create an 11"x2.25" strip of Fabric and an 11"x1" strip of Heat N Bond. If desired you can make the wristlet longer, some crafters go as large as 12-14" but 11" is a nice universal size.

2.  I made a template out of chipboard that was 12"x1.25" to help me achieve a consistent size and look. Fold in and iron the fabric to 1.25" wide.

3.  Center and iron Heat N Bond to the underside of the Fabric strip.

4.  Remove Heat N Bond backing and turn finished Fabric Strip right side up and iron to Cotton Webbing making sure to center it.

5.  Stitch along the edge of your Fabric strip, securing the edge onto the webbing.  Work slowly, keeping close to the edge.  Go the whole length on both sides.


6.  Fold the Cotton Webbing in half, right sides facing out and match up the ends.  Secure with Sewing Clips and stitch the ends together with a zigzag stitch.  Trim any loose threads and lightly coat the end in Fray Stop or equivalent liquid to help resist fraying over time.

7.  Tuck the sewn seam ends into the Key Fob Hardware, making sure that the Cotton Webbing is in there evenly and not hanging out one end or the other.

8.  Using your Key Fob Hardware pliers squeeze the Key Fob Hardware closed a little at a time.  I like to go back and forth a couple times so that I don't over-crimp one side too much.


9.  Add the Key Ring and Yay!!! You are done.  Good Job!!!

* Instructions for 1.25" Key Fob Hardware (adjust accordingly if using 1" Hardware)

To see all our Key Fob Hardware Tutorials, visit our Projects section here.

Quick and Easy Gift Idea @ ILikeBigButtons.com October 07 2021

Make these adorable Snap Barrettes to match or accent your loved ones favorite outfit or dress up their favorite t-shirt and jeans for an afternoon outing. Enjoy!

Supplies:

  • 1-2 Completed Flat Back Fabric Cover Button (Choose your size, Size 20 through Size 36 all work great, size depends on the statement you want to make)
  • 2 Snap Barrettes
  • E6000 or comparable adhesive

Steps:

1.  Follow these instructions to make Flat Back Fabric Covered Buttons.

2.  Lightly scuff the back of the Cover Button so the glue will adhere better (not essential but recommended).

3.  Clean both surfaces of dust.

4.  Apply E6000 to back of Cover Button.

5.  Press Snap Barrette into place and remove any extra Adhesive. On smaller sized Cover buttons center on the glue pad, as they increase in size adjust glue pad accordingly.

6.  Let dry and enjoy.

7.  Tada!

To see other great Cover Button ideas, visit our DIY Project section here.

Fabric Cover Buttons - Easy Peasy, Beautiful Impact! @ ILikeBigButtons.com August 19 2021


These aren't your grandma's Cover Buttons!!! Well, actually they are 😉 only better, with so many, many great uses for them.

💜 Flat Backs are used for crafts where you would like to glue a cover button: jewelry, bracelets, rings, earrings, necklaces, bobby pins and barrettes, scrapbooking, and much more.

💙 Wire Backs are used for fabric cover buttons in sewing, shoes, clothing, ponytail holders and much, much more.

Here are the 7 sizes we carry. From 1/2", which is about as small as your pinky nail, all the way up to 1 7/8" in diameter, about the size of the round side of a kiwi fruit.

We carry them in both flat back (glueable) and wire back (sewable).

• Size 20 (1/2 inch / 12 mm)
• Size 24 (5/8 inch / 15 mm)
• Size 30 (3/4 inch / 19 mm)
• Size 36 (7/8 inch / 23 mm)
• Size 45 (1 1/8 inch / 28 mm)
• Size 60 (1 1/2 inch / 38 mm)
• Size 75 (1 7/8 inch / 48 mm)

Assembling fabric Cover Buttons is fast and simple. In just seconds, you will have a button ready for your latest craft project.

Inspiration Board: Fabric Cover Buttons

 

Fabric Cover Button Jumbo Paper Clips @ ILikeBigButtons.com July 13 2021

😍 I'm in ❤️ with Jumbo Paper Clips and Cover Buttons. 😍

Quick & easy craft with stunning results!

How To Make A Needle Minder/Magnetic Pin Cushion @ ILikeBigButtons.com May 19 2021

I have been working on a lot of crafty projects recently and I needed a few new handy sewing accessories: Fabric Cover Button Needle Minder/Pin Cushion. I love the splash of color they add to my sewing station and their usefulness!

Supplies:

  • 1 Completed Size 75 (1 7/8 inch / 48 mm) Fabric Cover Button
  • Fabric Of Your Choice
  • 1x Standard Round Magnet (Approximately 3/4" Round)
  • E6000, Hot Glue, or comparable adhesive

I Like Big Buttons! - Picture Tutorial Below:

1.  Cut your fabric scrap. You will want a circle that is about twice the diameter of your button blank. *TIP* Our All-In-One Cover Button Template makes creating the right size circle of fabric a breeze.

2.  Put your fabric piece in the larger assembly tool piece (RIGHT SIDE DOWN). When you look into the tool you want to see the back of the fabric.

3. Glue the magnet inside the back of the Cover Button with Hot Glue or E6000.

4.  Place the button front (the domed piece) on top of the fabric. Leave the fabric edges hanging out.

5.  Press the cover button edges down into the tool. *TIP* To make it easier on my fingers, I use a sharpie marker to apply pressure.

6.  Place the back cover button piece on top of your fabric and button front. *TIP* If the cover button will be subject to repeated tugging from the back, you may want to add a little e6000 adhesive before attaching the back.

7.  Take the smaller piece of the assembly tool and with the open side down place it on the button back.

8.  Press down. You may hear a pop when the last bit of the button back slips into place. If you take the tool out and the button is not completely secured, just put it back in and press down again. *TIP* I often use a flat piece of wood to apply pressure, again to save my fingers. It also helps to avoid the button back going in at an angle.

9.  When you take the small assembly tool piece off, the fabric edges will be secured underneath the button back.

9.  Remove the button from the larger assembly tool piece.

10.  Tada! Now you have an attractive Pin Cushion/Needle Holder for your sewing room.

To see other great Fabric Cover Button ideas, visit our DIY Project section here.

Jumbo Paper Clip Size Comparison April 08 2021

From Left to Right - Standard (1.25 Inch), Large (2 Inch), and Jumbo (3.5 Inch) 

 

Our Jumbo Paper Clips are one of my favorite craft supplies. They are quick, easy to make, and are the perfect gift for the book lover in your family.
 
Customers often wonder just how big they are. They are REALLY big! Measuring 3 1/2" in length, they are a beautiful, bold accessory.
 
We carry them in three finishes: Silver, Antique Brass, and Gunmetal
 
Jumbo Paper Clips are commonly used to make bookmarks:
 
  • Attach size 36 (7/8" - 23 mm), size 45 (1 1/8" - 28 mm), or size 60 (1 1/2" - 38 mm) flat back cover buttons.
  • Glue on flat beads, paper punches, charms, gemstones, cabochons, silk flowers, and much more!
  • An adhesive such as E-6000 works great for attaching your crafty items.
We also offer them in Jumbo Paper Clip DIY Kits with everything you need to get started. 

 

 

 

 

 

 

Courtesy of craftycjaeger Flower Embellished Jumbo Paper Clips

 

Making Cover Button Paper Clip Bookmarks @ ILikeBigButtons.com April 05 2021

How To Make Fabric Cover Button Jumbo Paper Clip Bookmarks:

Supplies:

Instructions:

  1. Follow these instructions to make Flat Back Fabric Covered Buttons.
  2. Make sure the surfaces of the Cover Button back and Paper Clip gluepad are clean and free of oil.
  3. Apply E6000 to the back of the Cover Button.
  4. Press into place over the glue pad on the Paper clip at the desired height and remove any extra Adhesive.  The bigger the Cover Button the higher you will want to center the cover button.
  5. Let dry and enjoy.
  6. Tada!

You are done! Use these adorable Paper Clips to hold your place in your favorite book or cookbook.  Enjoy!

Making A Fabric Cover Button Full-Size Clothespin @ ILikeBigButtons.com February 23 2021

 

How to Make Cover Button Bobby Full-Size Clothespins:

Supplies:

  • 1 Completed Flat Back Fabric Cover Button (Attach Size 30 (3/4 inch / 19 mm), Size 36 (7/8 inch / 23 mm), or Size 45 (1 1/8 inch / 28 mm) flat back cover buttons.)
  • 1x Full-Size Wooden Clothespin
  • 1x Medium Plain Button
  • E6000, Hot Glue, or comparable adhesive

Instructions:

  1. Cut your fabric scrap. You will want a circle that is about twice the diameter of your button blank.
  2. Put your fabric piece in the larger assembly tool piece (RIGHT SIDE DOWN). When you look into the tool you want to see the back of the fabric.
  3. Place the button front (the domed piece) on top of the fabric. Leave the fabric edges hanging out.
  4. Press the cover button edges down into the tool. *TIP* To make it easier on my fingers, I use a sharpie marker to apply pressure.
  5. Place the back cover button piece on top of your fabric and button front. *TIP* If the cover button will be subject to repeated tugging from the back, you may want to add a little e6000 adhesive before attaching the back.
  6. Take the smaller piece of the assembly tool and with the open side down place it on the button back.
  7. Press down. You may hear a pop when the last bit of the button back slips into place. If you take the tool out and the button is not completely secured, just put it back in and press down again. *TIP* I often use a flat piece of wood to apply pressure, again to save my fingers. It also helps to avoid the button back going in at an angle.
  8. When you take the small assembly tool piece off, the fabric edges will be secured underneath the button back.
  9. Remove the button from the larger assembly tool piece.
  10. Tada! Now to attach it to the Clothespin.
  11. Use Hot Glue or E6000 to adhere a small plain button to the underside of the Cover Button. This is to fill the space between the back and the edges. You can also use felt or some other small object. You just need it to be sturdy enough to offer support. A small plastic button works great for this. You will see that the button is now flush across the bottom. I cut off the little nubs of glue that leaked through the button holes.
  12. Now adhere the finished Cover Button to the Clothespin. Press into place and center it until you are pleased with the alignment. Set aside to dry.
  13. Tada! Additional uses:
  • Add a thin magnet to the back and use on your magnetic board.
  • Add a push pin to the back and use on your cork board.

 

How To Make A Fabric Cover Button Mini Clothespin

To see other great Fabric Cover Button ideas, visit our DIY Project section here.

Making Fabric Cover Button Bobby Pins @ ILikeBigButtons.com February 19 2021

How to Make Cover Button Bobby Pins:

Supplies:

  • 1 Completed Flat Back Fabric Cover Button (Choose your size, Size 20 through Size 45 all work great, size depends on the statement you want to make)
  • 1 Bobby Pin
  • E6000 or comparable adhesive

Steps:

  1. Follow these instructions to make Flat Back Fabric Covered Buttons.
  2. Apply E6000 to back of Cover Button.
  3. Press Bobby Pin into place and remove any extra Adhesive. On smaller sized Cover buttons center the glue pad, as they increase in size adjust accordingly.
  4. Let dry and enjoy.
  5. Tada!

You are done! Wear these adorable Bobby Pins to match or accent your favorite outfit or dress up your favorite t-shirt and jeans for an afternoon outing. Enjoy!

Valentine's Day Fabric Cover Button Barrettes @ ILikeBigButtons.com February 11 2021

How to Make Valentine's Day Cover Button Snap Barrettes:

Supplies:

  • 1-2 Completed Flat Back Fabric Cover Button (Choose your size, Size 20 through Size 36 all work great, size depends on the statement you want to make)
  • 2 Snap Barrettes
  • E6000 or comparable adhesive

Steps:

  1. Follow these instructions to make Flat Back Fabric Covered Buttons.
  2. Lightly scuff the back of the Cover Button so the glue will adhere better (not essential but recommended).
  3. Clean both surfaces of dust.
  4. Apply E6000 to back of Cover Button.
  5. Press Snap Barrette into place and remove any extra Adhesive. On smaller sized Cover buttons center on the glue pad, as they increase in size adjust glue pad accordingly.
  6. Let dry and enjoy.
  7. Tada!

You are done!  Wear these adorable Snap Barrettes to match or accent your favorite outfit for Valentine's Day or dress up your favorite t-shirt and jeans for an afternoon outing. Enjoy!

Ribbon and Cotton Webbing Key Fob Tutorial October 05 2020

How to make a Ribbon Key Fob Wristlet:

You will need:

  • Scissors
  • Sewing Machine
  • Iron

Supplies:

Instructions (adjust accordingly for 1" hardware):

  1. Cut a 11" section of the Cotton Webbing and Ribbon of your choosing.
  2. Cut a 11" section of Heat N Bond, keeping it thinner than your ribbon.
  3. Iron the Heat N Bond to your Cotton Webbing, making sure to center it. This is not a necessary step but it makes it easier to sew the Ribbon on especially with embroidered ribbon.
  4. Iron the Ribbon to the Cotton Webbing.
  5. Sew up one side of the Ribbon and down the other. The Ribbon should now be securely attached to the Cotton Webbing.
  6. Trim the edges so they are even.
  7. Fold the Cotton Webbing in half, right sides facing out and match up the ends.
  8. Stitch the ends together with a 1/4" seam allowance.
  9. Trim any loose threads.
  10. Tuck the sewn seam ends into the Key Fob Hardware, making sure that the Cotton Webbing is centered.
  11. Using your Key Fob Hardware Pliers with silicone tips to protect the metal from getting scratched, squeeze the Key Fob Hardware closed a little at a time. I like to go back and forth a couple times so that I don't over crimp one side.
  12. Add the Key Ring and Yay!!! You are done. Good Job!!!

🌺 Cabochon Push Pin Kits and Cover Button Push Pin Kits 🌺 @ ILikeBigButtons.com September 01 2020

DIY Cherry Blossom Cabochons Push Pins/Thumb Tacks KIT (22 mm) - Makes 10

DIY Size 30 (3/4" (19 mm) Covered Button Push Pins/Thumb Tacks KIT - Makes 10

 

If you are looking for a super easy, fun, and impactful craft project, these decorative push pins are for you and just in time for the beginning of school.

Using our Cabochon DIY Push Pin Kit or Cover Button DIY Push Pin Kit, you can make these message or corkboard accessories that are super cute and well-received without much effort.

Place a small dab of E-6000 or a comparable adhesive on the metal circle glue pad on the push pins. Then simply press the flower cabochon or completed cover button into place and center it. Allow to dry for the recommended amount of time per adhesive's directions and enjoy!

The hardest part is waiting for the glue to dry. 😜

To see other great DIY STARTER KIT options, visit our DIY KITS section here.

I Like Big Buttons! 📎📎📎 Jumbo Paper Clips 📎📎📎 June 01 2020

https://ilikebigbuttons.com/collections/paper-clips

Jumbo Paper Clips & Jumbo Paper Clip DIY Kits are 10% OFF

No Coupon Necessary

Time to Stock Up!

 
1 Coupon Per Order. Good Through June 30, 2020.

Cabochon Bobby Pin Kits by ILikeBigButtons.com May 29 2020

DIY - SMALL - Mum Cabochon Bobby Pins KIT (10 mm) - Makes 10 Bobby Pins DIY - MEDIUM - Mum Cabochon Bobby Pins KIT (16 mm) - Makes 10 Bobby Pins
DIY - MEDIUM - Cherry Blossom Cabochon Bobby Pins KIT (16 mm) - Makes 10 Bobby Pins DIY - LARGE - Cherry Blossom Cabochon Bobby Pins KIT (22 mm) - Makes 10 Bobby Pins

 

If you are looking for a super easy, fun, and impactful craft project, these are for you. My little girls were thrilled to be the recipients of my craftiness. 

Using our Cabochon Bobby Pin DIY Kits, you too can make gifts that are super cute and well-received without much effort.

Supplies:

We carry a colorful mix of Mums in Small or Medium.

10 mm Mum Cabochons:

16 mm Mum Cabochons:

OR a colorful mix of Cherry Blossom Cabochons in Medium or Large.

16 mm Cherry Blossom Cabochons:

22 mm Cherry Blossom Cabochons:

You pick finish of your bobby pins from a colorful selection:

Place a small dab of E-6000 or a comparable adhesive on the metal circle glue pad on the bobby pin. Then simply press the flower cabochon into place and center it. Allow to dry for the recommended amount of time per adhesive's directions and enjoy!

The hardest part is waiting for the glue to dry. 😜

Tada!

 

To see other great DIY STARTER KIT options, visit our DIY KITS section here.

 

 

 

 

 

Size 24 (5/8 inch / 15 mm) Self Cover Buttons by ILikeBigButtons.com February 26 2020

We love our Cover Buttons! Easy to make and versatile they are one of my favorite go-to craft supplies.

We carry them in 7 great sizes. The second smallest, Size 24 (5/8"), is just slightly larger in diameter than a Skittle or M&M and available in both Wire Back (sewable) and Flat Back (glueable).

Size 24 (5/8 inch / 15 mm)

Size Reference

 

I Like Big Buttons! 💘 Cover Button Love Sale 💘

Cover Button Sets and Cover Button DIY Kits are 10% OFF | No Coupon Necessary

Time to Stock up!

Good Through February 29, 2020.
 

 

Size 24 Cover Buttons are great for smaller projects:

Lace & Fabric Cover Button Earrings

Fabric Cover Button Mini Clothespins

Fabric Cover Button Bobby Pins

Fabric Cover Buttons for your favorite outfit

Scrapbooking or Card Making

And Much, Much More

 

To see other great Fabric Cover Button ideas, visit our DIY Project section here.

How To Make A Self Fabric Cover Button: 7 Fabric Cover Button Sizes February 21 2020

Easy Peasy! So Much Fun!

Cover Button Tips:

  • The size of the fabric circle for each Cover Button size should be approximately twice the diameter of your button blank. If you would like a matching sized reusable plastic circle template, simply choose "Add Template" from the drop-down menu and the correct sized tool will be added to your order.
  • When the circle of fabric and Cover Button Cap are snugly situated in the clear base of the Cover Button tool, flip the tool over and double-check the positioning of your fabric. If it has a pattern, you will see a preview of how the button will form and can make adjustments to the fabric before you install the back.
  • You may want to add a dab of E6000 or comparable adhesive before installing the Cover Button Back as a precaution to ensure a permanent hold.
  • Save your fingers: Tip #1 - Use the backside of a permanent marker or comparable item on the smaller sized Cover Button Caps to press them into the clear base of the Cover Button tool.
  • Save your fingers: Tip #2 - Take a flat piece of wood and use it to apply even downward pressure on the pink plunger of the Cover Button installation tool when installing the back.  Not so much pressure that you flatten the button, just until it pops into place.
  • To remove the Cover Button from the clear base once it has been formed, bend the mold slightly and push up from the bottom to pop out the button.

"No Sew" Valentine's Day Craft Ideas from ILikeBigButtons.com February 13 2019

 

I can't believe Valentine's Day snuck up on us so fast, let's look at some fun and easy "No Sew" Cover Button crafts we can make for those we love!

Don't forget our DIY Kits are on sale on our website through 2/15/19, no coupon necessary.

Valentine's Day Fabric Cover Button Barrettes

Wear these adorable Snap Barrettes to match or accent your favorite outfit for Valentine's Day or dress up your favorite t-shirt and jeans for an afternoon outing. Enjoy!

Supplies:

  • 1-2 Completed Flat Back Fabric Cover Button (Choose your size, Size 20 through Size 36 all work great, size depends on the statement you want to make)
  • 2 Snap Barrettes
  • E6000 or comparable adhesive ... See More

Valentine's Day Fabric Cover Button Jumbo Paper Clip Bookmarks

Use these adorable Paper Clip Bookmarks to accent a Valentine for your special loved one or hold your place in your favorite book or cookbook  Enjoy!

Supplies:

Valentine's Day Fabric Cover Button Badge Reels

Use these adorable Valentine's Day Badge Reels to hold your ID for work, school, or play.  Enjoy!

Supplies:

Lace & Fabric Cover Button Earrings

Give these cute Lace & Fabric Cover Button Earrings as Valentine gift for your best friend or loved ones.  Enjoy!

Supplies:

Fabric Cover Button Bracelet Tutorial

Give this charming Cover Button Bracelet as Valentine gift for your best friend or loved ones.  Enjoy!

Supplies:

Cover Button Bobby Pins

Give these adorable Cover Button Bobby Pins as Valentine gifts for your best friend or loved ones.  Enjoy!

Supplies:

  • 1 Completed Flat Back Fabric Cover Button (Choose your size, Size 20 through Size 45 all work great, size depends on the statement you want to make)
  • 1 Bobby Pin
  • E6000 or comparable adhesive ... See More

Recent Articles

How to make Cover Button Paper Clips/Bookmarks with I Like Big Buttons! DIY Kit Posted on March 21, 2022

How to make Cover Button Barrettes with I Like Big Buttons! DIY Kit Posted on March 15, 2022

How to make Cover Button Badge Reels with I Like Big Buttons! DIY Kit Posted on March 10, 2022

Pack An Order With Us @ ILikeBigButtons.com Posted on January 31, 2022

Christmas Gift Idea #2: Key Fob Wristlets @ ILikeBigButtons.com Posted on December 02, 2021

Quick and Easy Gift Idea @ ILikeBigButtons.com Posted on October 07, 2021

Fabric Cover Buttons - Easy Peasy, Beautiful Impact! @ ILikeBigButtons.com Posted on August 19, 2021

Fabric Cover Button Jumbo Paper Clips @ ILikeBigButtons.com Posted on July 13, 2021

How To Make A Needle Minder/Magnetic Pin Cushion @ ILikeBigButtons.com Posted on May 19, 2021

Jumbo Paper Clip Size Comparison Posted on April 08, 2021

Tags

Back to the top