News
Bandana Bib with KAM Snaps and a PDF Pattern June 07 2016
One of our most popular tutorials, Bandana Bibs are a great gift for those little droolers and mess makers in your life or as an outfit accessory. So cute! I, also, used our Heart Shaped KAM Snaps for added pizazz, check it out!
Just 6 days left in our KAM Snaps Heart and Star Starter Pack Kit with Pliers (Approximately 1000 Sets)!?! (A $90.00 value) Don't forget to ENTER:
Also, if you don’t want to wait, you can get 10% off our Heart Snaps on our website: HEART10
Or 10% off our Star Snaps on our website: STAR10
#ilikebigbuttons #giveaway #win #kamsnaps #snappress #bandanabib #tutorial
Supplies:
- Fabrics of your choice
- 1 Heart Shaped KAM Snap Set
- KAM Snap Pliers and Awl
- Bandana Bib PDF Pattern (may need to adjust for your child's size or add more KAM Snaps settings)
- Standard Sewing Machine
Instructions:
1. Download the Bandana Bib PDF Pattern. Print out the pattern making sure the 1″ square in the corner measures 1″ square when printed that will indicate the pattern is the right size.
2. Cut out the pattern.
3. Place your pattern, with long straight side on fabric folded in half, and pin in place.
4. Cut the 2 pieces of Fabric you will use.
5. Place Fabrics right sides together.
6. Pin together.
7. Sew pieces together with a 1/4" seam allowance, back stitching at the start and finish of sewing, make sure to leave a 3-4" gap so that you can pull the piece right side out.
8. Pull piece right side out and make sure to push all the round and square corners out until they lay flat.
9. Fold in the opening's seams and pin in place.
10. Stitch a finish stitch 1/8" to 1/4" all the way around the bib, making sure to ease your way around the left and right tabs. I do a couple stitches, stop, then lift the foot, turn the fabric slightly, put the foot down, and do a couple more stitches and repeat. Make sure the back stitch at the beginning and end of your sewing.
11. Use the template to mark the KAM Snap placement, you many want to check the measurement of your child's neck and adjust the pattern or snap placement accordingly. This bib worked for a toddler but with an extra set of snaps can work for more sizes.
12. I decided as I was getting ready to install the KAM Snaps to go with our new Heart Shaped snaps. Install the Heart Shaped KAM Snap Cap and Stud in the left and a Cap and Socket on the right tab.
13. Interested in Heart Shaped KAM Snaps, check out our great 25 colors, in smaller package quantities for more great variety!
14. Totally cute, don't you think! ;) Happy Snapping!!!
Heart and Star Starter Kit with KAM Pliers Giveaway!!! June 02 2016
GIVEAWAY!!! Who wants to win a KAM Snaps Heart and Star Starter Pack Kit with Pliers (Approximately 1000 Sets)!?! (A $90.00 value)
You will receive a set of KAM Plastic Snap Pliers and Awl, 600 Heart Snaps in all our colors (Approximately 25 sets of each color), and 400 Star Snaps in our rainbow of colors (Approximately 25 sets of each color).
Also, if you don’t want to wait, you can get 10% off our Heart Snaps on our website: HEART10
Or 10% off our Star Snaps on our website: STAR10
Giveaway good until Monday 6/13/2016
ENTER TO WIN HERE (by Liking, Commenting, and Sharing our Facebook Post for this Giveaway):
*Snaps will be as pictured. You will receive 2 bags: All the Heart parts will be mixed together in one bag and all the Star parts will be mixed together in one bag.
An I Like Big Buttons Christmas! Idea #1: How to make a Bandana Bib with KAM Snaps and a PDF Pattern November 13 2015
Gift idea #1: One of our most popular tutorials, Bandana Bibs are a great gift for those little droolers and mess makers in your life or as an outfit accessory. So cute! I, also, used our newly stocked Heart Shaped KAM Snaps for added pizazz, check it out!
Supplies:
- Fabrics of your choice
- 1 Heart Shaped KAM Snap Set
- KAM Snap Pliers and Awl
- Bandana Bib PDF Pattern (may need to adjust for your child's size or add more KAM Snaps settings)
- Standard Sewing Machine
Instructions:
- Download the Bandana Bib PDF Pattern. Print out the pattern making sure the 1″ square in the corner measures 1″ square when printed that will indicate the pattern is the right size. ... See More
Pin it for later: http://www.pinterest.com/pin/201184308328918372/
REMEMBER!!!
We are giving away a KAM Snap Professional Press and 250 Rainbow Spectrum Super Starter Kit right now! Enter to win (ends 11/16/15):
And our 10% off coupon (good in our Snap section on our website)! Coupon Code: SNAPLOVE
#ilikebigbuttons #giveaway #win #kamsnaps #snappress #bandanabib #tutorial
30 Days of Snaps!!! Day #28: How to make a Bandana Bib with KAM Snaps and a PDF Pattern July 16 2014
Day #28
Making a Bandana Bib with KAM Snaps and a PDF Pattern
Supplies:
- Fabrics of your choice
- 1 Heart Shaped KAM Snap Set
- KAM Snap Pliers and Awl
- Bandana Bib PDF Pattern (may need to adjust for your child's size or add more KAM Snaps settings)
- Standard Sewing Machine
Instructions:
1. Download the Bandana Bib PDF Pattern. Print out the pattern making sure the 1″ square in the corner measures 1″ square when printed that will indicate the pattern is the right size.
2. Cut out the pattern.
3. Place your pattern, with long straight side on fabric folded in half, and pin in place.
4. Cut the 2 pieces of Fabric you will use.
5. Place Fabrics right sides together.
6. Pin together.
7. Sew pieces together with a 1/4" seam allowance, back stitching at the start and finish of sewing, make sure to leave a 3-4" gap so that you can pull the piece right side out.
8. Pull piece right side out and make sure to push all the round and square corners out until they lay flat.
9. Fold in the opening's seams and pin in place.
10. Stitch a finish stitch 1/8" to 1/4" all the way around the bib, making sure to ease your way around the left and right tabs. I do a couple stitches, stop, then lift the foot, turn the fabric slightly, put the foot down, and do a couple more stitches and repeat. Make sure the back stitch at the beginning and end of your sewing.
11. Use the template to mark the KAM Snap placement, you many want to check the measurement of your child's neck and adjust the pattern or snap placement accordingly. This bib worked for a toddler but with an extra set of snaps can work for more sizes.
12. I decided as I was getting ready to install the KAM Snaps to go with our new Heart Shaped snaps. Install the Heart Shaped KAM Snap Cap and Stud in the left and a Cap and Socket on the right tab.
13. Interested in Heart Shaped KAM Snaps, check out our great 25 colors, in smaller package quantities for more great variety!
14. Totally cute, don't you think! ;) Happy Snapping!!!
25 New KAM Snap Heart Colors! July 15 2014
- We have 25 new heart shaped snap colors.
- As with all of our other snaps, we now offer ALL of our heart shaped snaps in 10 and 25 packs.
- Also, breaking the industry norm, we are now packing them with all heart caps (not half round snaps and half shaped snaps)!*
- For a full size color chart, please click here (or save a copy: JPG or PDF).
- To purchase, visit our website here.
*Of course, you can still pair them with the matching round sets if you want them to go further. Just order the same color/quantity of round snap sets and they will go twice as far.
