News

Tag Sensory Blankets May 31 2022

I love making these because they are simple,

my babies loved them,

and they are easy to sew.

Link to Tutorial

Pin for Later


How To Install KAM Plastic Snaps with KAM Hand Pliers @ ILikeBigButtons.com March 29 2022

How To Install KAM Plastic Snaps with KAM Hand Pliers. It's easy-peasy and a snap to do.

Visit our KAM plastic snaps page to see our full selections of KAM plastic snaps and KAM tools.
 
Check out our Inspiration Board to find a plethora of Tutorials and Ideas for how to use KAM plastic snaps in your crafty projects.
 

KAM® Snap Removal Pliers Sale @ ILikeBigButtons.com March 07 2022

Do you own a set of KAM® Snap Removal Pliers yet? They may be my favorite KAM tool. They take the frustration out of removing broken or miss-set snaps. And they're a Snap to use!

If you need to remove a plastic snap, this is by far the easiest means for removing it and our KAM Snap Removal Pliers are on sale right now.


New! KAM Snap Combos in Lights, Mids, and Darks! @ ILikeBigButtons.com November 05 2021

 

 
Our KAM Starter Pack section has grown. We just added Combos in Lights, Light/Mids, Mids, Mid/Darks, and Darks. Great options if you want a range of snap colors to work with but aren't sure which to pick.

Tuesday Humor @ ILikeBigButtons.com September 14 2021

 

😜 🧶 ✂️ Yesterday at Hobby Lobby, my daughter and I rescued some beautiful chenille yarn! 😜 🧶 ✂️

Our Light Navy (B58) KAM Plastic Snap is our most popular true blues, great for Fall and Christmas alike. 😍 If you are not into Light Navy, we carry 22 other shades of blue and 130+ unique colors of snaps.


Great Value KAM® Starter Kit @ ILikeBigButtons.com August 13 2021

Great Value KAM® Starter Kit!!! Everything you need to get snapping!
 

KAM® Snap Pliers, Awl, and 50 sets of White KAM® Plastic Snaps (Glossy):

    • KAM® Plastic Snap Setting Pliers
    • 2 Metal Setting Rods (the installed rod sets snap sizes 14, 16, and 20; the wider rod sets size 19 and 22 snaps)
    • Cap Dies (for setting size 16, 19, 20, 22, heart and star shaped snaps)
    • Screwdriver (for changing cap dies)
    • Awl (for creating holes in fabric)

      Glossy WHITE KAM® plastic snap sets in size 20 (0.5" - 12.4 mm).

      Size 20 snaps are our most popular size and can be used for most general projects like baby diapers and clothing. Size 20 snaps have the largest color variety, have a good strong hold, and are a good size for most projects.

       
      Quantities Limited!

      Button Enclosure Conversion to Sweatpants Pocket with KAM Plastic Snaps @ ILikeBigButtons.com July 02 2021

      I love my slouchy sweatpants for getting work done around the house, but their comfortable pockets are useless when for holding onto my phone when I am active. KAM plastic snaps to the rescue! I turned my useless slouchy pocket into a secure button enclosed, phone holding pocket in just a few seconds with KAM plastic snaps.

      Supplies:

      I used some fun colored snaps from the KAM plastic snaps Grab Bag making bucket. 

      Easy peasy, I wore my phone around all day while I cleaned and worked. It was secure the whole time and with a quick unsnapping on hand when I needed it. KAM plastic snaps are the BEST! 

      Tada! I can now get my list of projects done without fearing my phone will take a tumble from my pocket while I am moving.

      To see other great KAM Plastic Snap ideas, visit our DIY Project section here.


      Hands-free Water Bottle Holder @ ILikeBigButtons.com June 11 2021

       

      My oldest is headed off on a class trip to Silverwood Theme Park. Rollercoaster rides, caramel apples, sunshine, and lots of laughter. A hands-free Water Bottle, so she can keep moving and not worry about keeping hydrated, is a must.

      I made a couple of quick water bottle holders from ILikeBigButtons.com craft supplies.

      Here is what you will need:


      Monday Humor @ ILikeBigButtons.com March 29 2021

      😂🤣😂

      Our Seaspray (G85) KAM Plastic Snap is one of our most popular light teals. It works great for both girls and boys alike and is a great all-around color. 😍 If you are not into Seaspray, we carry 22 other shades of blue and 130+ unique colors of snaps.


      Wednesday Humor @ ILikeBigButtons.com March 03 2021

       

      ✂️🧵 I need some therapeutic craft time, for sure! ✂️🧵

      Our Medium Pink (B57) KAM Plastic Snap is a great classic pink and reminds me of cotton candy, which is my all-time favorite fair food. Can I call cotton candy food? 😜

      If you are not into Medium Pink, we carry 18 other shades of pink and 130+ unique colors of snaps.


      K1 KAM Plastic Snap Pliers Versus K2 ILBB Plastic Snap Pliers January 08 2021

      We get a lot of questions about the difference between K1 and K2 plastic snap pliers. Both K1 and K2 pliers work great for applying plastic snaps. They are lightweight, portable, and easy to use.

      The K1 pliers are KAM® branded pliers, the same quality brand as the snaps we carry. They come with four (4) dies:

      The K2 pliers are manufactured for our I Like Big Buttons!® brand. They are a more economical option for those who aren't looking to do all that many snaps. They come with three (3) dies:

      K1 are sturdier and have more robust dies than K2. If you are just doing a few snaps, the K2 is not a bad choice, and some people like them better for Size 16 snaps. The K1 pliers do a nicer job on Size 20 snaps and work great on Size 16.

      K1 pliers form the snaps creating a small rounded dome in the socket and stud center. K2 pliers form more of a flat pancake with a bullseye impression that some like for Size 16 snaps, as it can make them snap together a little easier.

      If grip strength is an issue, K2 pliers require less force to sufficiently set snaps.

      In general, we recommend K1 over K2, but both work great.

       


      What are you feeling Thankful, Grateful, and Blessed about today? November 23 2020

       

      I am so very Thankful, incredibly Grateful, and unbelievably Blessed to be surrounded, loved, and encouraged by my sweet husband and great kiddos today and always!
       
      What are you feeling Thankful, Grateful, and Blessed about today?
       
      Our Emerald (G109) KAM Plastic Snap reminds me of beautiful evergreen trees, cozy fires, and family gatherings.
       
      If you are not into Emerald, we carry 16 other shades of green and 130+ unique colors of snaps.

       


      Jean Pacifier Clip with Fabric Rosette November 16 2020

       

      Supplies for a Recycled Jean Pacifier Clip with Fabric Rosette:

      Instructions:

      1. Using an old, holey pair of Jeans cut two 1 1/2" x 14" strips of material.
      2. Use Sewing Clips to hold the material, wrong sides together, right sides facing out.
      3. Stitch around the strip of fabric about a 1/4 to 3/8" in all the way around making sure to backstitch at the start and end.
      4. Pull on the edges to fray the jean material up to the stitch you made.  I used a crafty child :) with a cutting board and a fork.  It will also fray over time but I was going for this look.
      5. To make the Fabric Rosette, fold the fabric in half, wrong sides together, two times.  You will end up with about 1/2" or less strip of fabric 24" long.  I used an iron to fold it, not so much that it was completely flat, just enough that it held its shape.  Start at one end and hot glue the first bit of it back against itself.
      6. Continue this ever so often so that the 'bud' stays together.
      7. Make the bud or center of the rose about 1/2" in diameter.  Add one last drop of hot glue.
      8. Now twist the fabric 360 degrees, so that the bottom becomes the top.  Tack it with a small bead of hot glue and repeat.
      9. Continue twisting and gluing until you run out of fabric or until you reach the desired size of your rosette.
      10. It will look like this when you are finished.
      11. Glue the last bit of fabric on the underside of the Rosette securely with hot glue.
      12. For a more finished look, I added a circle of felt to the bottom with Fabri-Tac.
      13. Put the KAM Plastic Pacifier Clip on the Fabric strip about 1″ in.
      14. Fold back 1″ of the strip back onto itself.
      15. Straight stitch across the fabric strip just behind the KAM Plastic Pacifier Clip.  Make sure to set the stitch.
      16. Make sure that the internal snap in a comfortable distance to accommodate the width of the handle, I spaced my KAM Snaps about 2″ apart using the Pacifier I have with the biggest handle.
      17. Now on the side where the Pacifier will be attached, I installed a Cap and Socket about 1/2″ from the edge.  I used Size 20 snaps for this tutorial but either Size 20 or Size 16 will work great.
      18. Add Fabric Rosette with Fabri-Tac to the Pacifier Clip just above the clip.
      19. Now snap the Pacifier in place, attach to your child’s outfit and go.
      20. Tada!  Okay, I think I am in love.  Super cute!  Happy Snapping!!!  To see our other great Pacifier Clip Tutorial and KAM Plastic Snap Ideas and buy these supplies visit I Like Big Buttons.com.

      Disclaimer:  Keep in mind that although I have rough tested these I in no way recommend you leave your baby alone with these as there are small pieces and if not done properly they may come apart and become a choking hazard.  I would recommend these clips under adult supervision only.  The maker and/or parent assumes full responsibility when using these pacifier clips.


      "No Sew" Pacifier Clip with KAM Snaps and Enamel Clip by ILikeBigButtons.com November 03 2020

       

      Supplies for a "No Sew" Pacifier Clip:

      Instructions:

      1. Choose a 7/8" or 3/4" Grosgrain Ribbon, cut a 14" to 16" length of ribbon.  I did 7/8" Grosgrain Ribbon and I cut it 16" long so when it was completed it was approximately 12" long.
      2. The ribbon I was using was made of polyester so I used a lighter to seal the ends of the ribbon so it doesn't fray.  (If you are unsure, you may want to practice on a scrap piece if this is your first time or you are unsure of what the material is made of.)
      3. Then I used a bit of Fabric Tac and folded over 1" of the ribbon back on itself to reinforce the ribbon and pressed it firmly and let it dry.  Repeat on the opposite end.
      4. Once dry, I installed a Cap and Socket in each end of the ribbon about 1/2" from the edge.  I used Size 20 snaps for this tutorial but either Size 20 or Size 16 will work great.
      5. On the side that will hold the Enamel Clip, I simply folded the ribbon over at the 1" mark and installed a Cap and Stud where it would meet.  I, then, feed the Enamel Clip onto the ribbon and snapped it into place.  It may have been easier to thread on the pacifier clip before installing any Snap parts but I was able to feed it through without much trouble.
      6. Now on the side where the Pacifier will be attached, adjust the internal snap at a comfortable distance to accommodate the width of the handle.  I went an additional 1/2" for the Pacifier, I used.
      7. Now snap the Pacifier in place, attach to your child's shirt and go.
      8. Tada!  Happy Snapping!!!

      Friday Humor @ ILikeBigButtons.com October 23 2020

      Some days, for sure! 😜


      BTW, this is B38 - Deep Red, one of my all-time favorite KAM plastic snap colors. It is the quintessential red and reminds me of fall apples, fire trucks, and school pride. Can you guess what one of my school colors was growing up? 🥰 If you are not into Deep Red, we carry 9 other shades of red, 15 shades of pink, and 130+ unique colors of snaps.


      Face Mask with Scrunchy Earpieces Using KAM Plastic Snaps Tutorial by ILikeBigButton.com April 23 2020

      https://ilikebigbuttons.com/collections/sewing-notions

      As a precaution, I have been making our family some face masks. Nothing fancy, I was limited to what supplies I had on hand. I made a mask with Elastic earlier, this one will be with ribbon ties.

      So with some fabric scraps, ribbon (they mentioned you could use shoelaces as an option), sewing clips, and my trusting sewing machine, I found a set of instructions and struck out.

      Here is the #1 version and #2 version I made:

      https://ilikebigbuttons.com/collections/sewing-notions

      https://ilikebigbuttons.com/blogs/news/face-mask-with-ribbon-using-sewing-clips-tutorial-by-ilikebigbutton-com

      https://ilikebigbuttons.com/collections/sewing-notions

      Supplies:

      https://ilikebigbuttons.com/collections/sewing-notions

      1. Cut out 2x 9.5" x 6.5" fabric rectangles and 2x 2" x 12" fabric rectangles.

      https://ilikebigbuttons.com/collections/kam-snap-sets

      2. Iron the 2"x12" in half making a 1"x 12" fabric strip with right side facing in. Make 2.

      https://ilikebigbuttons.com/collections/kam-snap-sets

      3. Sew 1/4" seam along the long side (12" long seam) and turn then the tube right side out. Iron smooth.

      https://ilikebigbuttons.com/collections/kam-snap-sets

      4. Fish a 7" piece of elastic through the tube, I used a sewing clip to keep the back end of the elastic from getting lost in the tube. Pin the elastic level with the end of the tube. It should start to scrunch up some. The tube is 12" long and the elastic is 7" long.  Tuck the fabric into the tube without losing the elastic (use a second pin to keep in place) and sew the finished end of the earpiece that will be exposed. Make 2.

      https://ilikebigbuttons.com/collections/kam-snap-sets

      5. With the right side of 9.5" x 6.5" fabric facing up, pin the 2 fabric and elastic earpieces to the bottom corners. Like so.

      6. Pin the second piece of 9.5" x 6.5" fabric facing down to the fabric with the earpieces tucked safely inside. Make sure the earpieces don't get caught in the edges while sewing.

      7. Sew a 1/4" seam starting about 1/2 way on the long side. Go all the way around the perimeter, stopping when you have about 1.5" to 2" left. Make sure to go back and forth at each of the corners to anchor the ribbon. Leave that gap so that you can turn the face mask right side out.

      8. Turn the mask right side out and iron it flat.

      https://ilikebigbuttons.com/collections/kam-snap-sets

      9. Make three pleats lengthwise, like you are folding a paper fan. I eyed it and used the sewing clip width as my pleat measurer, but if I was making more than a handful of these, I would make myself a template to make this part easier. The pleats help the mask form around the wearer’s face. Secure each pre-sewn pleat with a sewing clip as pictured above.

      10. Now sew a 1/4"  stitch around the outer perimeter of the mask face, going back and forward over the corners to add more stability to the ribbon.

      11. Then, top stitch a second time around the outer edge about 1/4" in from the first round of stitching.

      https://ilikebigbuttons.com/collections/kam-snap-sets

      https://ilikebigbuttons.com/collections/kam-snap-sets

      https://ilikebigbuttons.com/collections/kam-snap-sets

      https://ilikebigbuttons.com/collections/kam-snap-sets

      12. Using your KAM Plastic Snap Pliers and KAM Plastic Snaps add a snap to the upper edge of the mask and the end of the loose earpiece.

      https://ilikebigbuttons.com/collections/kam-snap-sets

      13. Tada! You have a finished face mask. This was my husband's favorite because the elastic didn't rub and pull at his ears. I added a second KAM Plastic Snap in pink to each side to make the mask work better with my face.

      https://ilikebigbuttons.com/collections/kam-snap-sets

      *Afterthoughts, this mask was the perfect size for my husband, but I added another KAM Plastic Snap an inch in for me on the scrunchy earpiece. This also worked for my teens, but I will need to adjust for my smaller kiddos. This mask seems best sized for teens to adults.


      I Like Big Buttons! Fun Facts: How We Prepare Our Plastic Snaps And Why October 28 2019

      For all our new friends and followers of I Like Big Buttons!, it seemed like a great time to introduce you to our amazing Plastic Snaps!!!  For those of you who have been with us for a long time, here is a refresher.

      We carry a variety of package deals for our snaps from 10 sets, 25 sets, 100 sets up to thousands of KAM snaps with and without pliers or professional press all at a great price. We have a listing for just about everyone at the price range and quantity you desire.

      Our 25 packs sets came to be largely for cloth diapers, but over the last decade, they have become our most popular quantity for both our cloth diaper makers and our embroidery, snap tab making, and general sewing customers.

      We provide the best of both worlds, smaller packs to those that want greater variety and larger packs for those looking to use snaps in bulk.

       

      Some of the other these reasons we offer these great options include:

      * An equally large demand for “just a sampling of every color”, which gave birth to our sets of 10 and Starter Packs.

      * We also offer individual parts in quantities of 100 and 1000 in all of KAM Plastic Snaps 130+ colors.

      If you aren't sure how to jump into plastic snaps, we also carry starter packs including multi-packs of 10 or 25 sets of snaps.  If you are new to snapping, we have starter packs with plastic snap pliers, awl, and an instructional DVD.  These Starter Packs are a great way to get addicted :).  We have 18 preset themes including Rainbow Spectrum, Pastel Spectrum, Vibrant Boy, Vibrant Girl, Patriotic, Military, and many others.

      Check out our convenient Starter Packs:

      Starter Kit

      We also offer an option to choose your own colors.  You can pick from any of KAM Plastic Snaps 130+ fun colors. Have you taken a moment to check out our easy to navigate KAM Snap Visual Ordering Chart!?!

      KAM Snap Vision Ordering Chart

      Here is our chart of available colors, we carry over 130+ great KAM Plastic Snap colors.

      GotLux_Compact_Colors

       

      Other KAM Plastic Snap Deals going on right now:

      Rainbow GRAB BAG: Random 1000* Kam Plastic Snaps for $21.95 (Regularly $35.95)

      1000* Kam Snaps/Plastic Snaps for $18.95 (Regularly $35.95)

      See our Clearance and Sales Section for other great deals!


      "No Sew" KAM Plastic Snaps Backpack Embellishments by ILikeBigButtons.com August 28 2019

      My kiddos wanted a little embellishment on their backpacks this year so that they could tell theirs from the sea of backpacks at school. Simple, "No Sew", and I was able to customize each kiddo's backpack to match their personality. KAM plastic snaps to the rescue!

      Mr. J wanted his backpack in his favorite color: Orange! He picked Size 20 KAM Plastic Snaps - B52 - Dark Orange.

      Mr. M likes a little pizzazz in his wardrobe and his backpack is no exception. He picked Size 20 KAM Plastic Snaps - G96 -Mirror (Round shaped) and Star-Shaped KAM Plastic Snaps - G124 - Robin's Egg Blue.

      Miss E is all about love. She chose Heart-Shaped KAM Plastic Snaps in G99 - Lilac and G96 - Mirror.

      To see other great KAM Plastic Snap ideas, visit our DIY Project section here.


      Adding Button Enclosure to Sweatpants Pocket with KAM Plastic Snaps by ILikeBigButtons.com July 22 2019

      I love my slouchy sweatpants for getting work done around the house, but their comfortable pockets are useless when for holding onto my phone when I am talking to my sister while we clean via wireless headsets. :) KAM plastic snaps to the rescue! I turned my useless slouch pocket into a secure button enclosed, phone holding pocket in just a few seconds with KAM plastic snaps.

      Supplies:

      I used some fun colored snaps from the KAM plastic snaps Grab Bag making bucket. 

      Easy Peasy, I wore my phone around all day while I cleaned and worked. It was secure the whole time and with a quick unsnapping on hand when I needed it. KAM plastic snaps are the BEST! 

      Tada! I can see tons of hand-free cleaning in my future without fear that my phone will fall out of my pocket while I am moving.

      To see other great KAM Plastic Snap ideas, visit our DIY Project section here.


      How To Make A KAM Plastic Snap Cord Keeper/Organizer by ILikeBigButtons.com February 05 2019

      Cords, cords, cords!!! Despite my husband's best efforts to make our house wireless, there are cords everywhere. Part of the joy of being a mom of many, I suppose. 😜 Everyone has one or more somethings that need to be charged and my husband makes sure there are enough cords so that no one is left crying. Have I mentioned he is my resident computer wiz? A job he proudly takes on.

      So with cords abounding in my life and house, I decided we needed a better way to manage them all. Here are the results of my efforts. Cord keepers/organizers to simplify my life and corral the cords we can't live without. 🤪

      Supplies:

      Instructions:

      1. Cut out your material of choice, I used Marine Vinyl I had left over from a summer project. I cut each piece approximately 5.25" x 2" and gave them two different styles of finished ends. One is a pointed end, I used my quilting square to accomplish this, and the other has a rounded end, I used a small drinking cup to create the rounded tip. *The cords I was making these for were 6' cords, you may need to adjust the length of your cord keeper to accommodate a larger or smaller cord.

      2. Place the two pieces of Marine Vinyl with wrong sides together and pin with Sewing Clips, if desired. Straight stitch with a 1/4" seam around the whole piece using a back stitch at the beginning and end to set the stitch. 

      3. Trim the edges down to 1/8" to remove the excess vinyl and any uneven edges. The Marine Vinyl can slip a little bit when you are sewing and I found this was the easiest way to get a clean edge.

      4. Measure to the center at the top and bottom of each cord keeper/organizer and place a mark where you want your KAM Plastic Snap to sit. I don't like to eye it as I often find them off-center when I wing it.

      5. Poke a hole through the centered mark with your KAM Awl and insert the KAM Plastic Snap Cap prong through the hole. You will want the cap on the top side (the side that was up when sewing) of your cord keeper and the socket or stud on the bottom side.

      6. Flip the cord keeper over and add the socket.  Install the KAM Plastic Snap Cap and Socket on the edge that is rounded or pointed and a Cap and Stud on the square edge as pictured below.

      7. Remember to install the snaps so that one half (Cap and Stud) are face up and one (Cap and Socket) are face down so that when you fold the cord keeper around the cord, the socket and stud meet.

      8. Tada! These cord keepers/organizers take only minutes to make with scraps of vinyl/fabric, a few KAM Plastic Snaps, and are already making my life feel less crazy. At least until they all get home from school. 😜

      To see other great KAM Plastic Snap ideas, visit our DIY Project section here.


      KAM Snap Upcycled Jean Christmas Ornaments by ILikeBigButtons.com December 05 2018

      Today I decided a need a few Upcycled Jean Christmas Trees. As I have mentioned in the past, finding jeans destine for the scrap pile is no problem with a house full of rambunctious kiddos. These cute trees also remind me of some that my parents had when we were growing up.

      Supplies:

      • A set of holey Jeans
      • Star KAM Snaps
      • KAM Snap Pliers and Awl
      • Fabric of your choice (I picked Christmasy colored cotton fabric)
      • Ribbon
      • Quilt Batting or Pillow Stuffing
      • Fabric Adhesive
      • Standard Sewing Machine
      • Scissors

      1.  Make a simple Christmas Tree template and trace on your jean fabric with a permanent marker.

      2.  Make pairs of each tree so that you have a front and back for each tree. You could also use felt or fabric on the back to extend the impact of your jean fabric.

      3.  Cut the Christmas Tree template down. I took about a 1/2" on each side/angle. Make a Fabric Christmas Tree silhouette for each Jean Christmas Tree.

      4.  Use a Fabric Adhesive to adhere the Christmas Tree silhouettes to the fronts sides of the Jean Christmas Trees.

      5.  Use a decorative stitch to outline the Upcycled Jean Christmas Trees on two sides. Then fill with quilt batting or pillow filling.

      6.  Finish stitching along the bottom swoop of the Christmas Tree. Add a loop of decorative ribbon and a Star KAM Plastic Snap to the top of the Christmas Tree.

      Additional Crafty Ideas:

      • You could add multiple cuts along the edges of the trees to add more character.
      • Or you could fray the edges of the trees.
      • You could give the trees finished edges, but that wasn't the look I was personally going for.
      • You could add KAM Snaps; both Star, Heart, and Round shaped into the body of the tree to represent ornaments or twinkling lights.

      7.  Tada! I think they turned out great and add a great pop of color to our Christmas Tree.


      I Like Big Buttons! Upcycled Messenger Bag/Purse Tutorial November 09 2018

      We are a cat loving family here at I Like Big Buttons. As such, we have a few fluffy friends scurrying around. Recently, my husband picked up a few bags of cat food that not only were made of a more durable material than the paper bags ones but also had cute kitty images on them. I couldn't resist turning them into some cute messenger bags for a couple of my little cat lovers. :)

      How to make an Upcycled/Recycled Messenger Bag/Purse with KAM Snaps and Pet Food Bag

      Supplies:

      • Pet Food Bag of your choice (Look for the ones made of woven plastic)
      • Marine Vinyl or a material of your choice
      • 2 KAM Snap Sets (Depending on the thickness of the material you may want Long Prong)
      • KAM Snap Pliers and Awl
      • 1″ Cotton Webbing
      • Scissors/Rotary Blade
      • Standard Sewing Machine

      1.  Cut the bag along the seams. I plan on making 2 bags with it. For this project, I am focusing on making each bag with a kitty image front and center. Use a damp cloth to wipe the leftover cat food crumbs from the interior of the bags and let air dry. This doesn't take more than a few minutes.

      2.  Decide on your shape. I like to craft off the cuff. This lid of a storage container was just the right size and shape to showcase the kitty image. Trace around it with a marker.

      3.  I picked the height based on the image. I left a 1" above each kitty image. *If I did it again, I might do 2" or 3" instead. As you will see later, the flap of the bag covers some of the image. If I had dropped it another inch I think it would have looked slightly better when snapped closed.

      4.  Cut 2 pieces of Marine Vinyl or material of your choice the same size at the kitty images. I had some vinyl left over from a summer chair reupholstering product. I love it because the color goes nicely with the kitty image and it is durable.

      5.  Cut two flaps for the messenger bags. I cut them the same width as the bags and longer than I thought I would need so I could adjust on the fly.

      6. Using a 1/2" seam sew the kitty image to the front piece of Marine Vinyl, right sides together. I chose to put the Marine Vinyl front to the front so that the interior of the bag was uniform, but you could turn the right side of the Marine Vinyl inward so that it was to the inside of the bag. Sewer's choice. :)

      7.  Fold the sewed seam flat and smooth. Then, fold it until the kitty image is right side out. Smooth the sewed seam and Marine Vinyl.

      8.  Sew 1/4" seam along the top of the finished edge.

      9.  Fold the top edge of the back piece of the bag over a 1/2". Sew 1/4" seam along the edge, creating a finished edge.

      10.  For the top flap, I created a simple square with three finished edges. Marine Vinyl is durable and the raw edges hold up nicely. If using another material, you will have to give consideration to the material you are using and adjust accordingly. The messenger bag/purse will be about 8" wide when finished so I made the flaps slightly smaller at 7.75".  *If I did it again, I might have shaved off a little bit more to give the shoulder strap more room to fill.

      11.  I, then, cut the height of the flap down to 3" because I wanted to see as much of the kitty image as I could after the KAM plastic snap was installed.

      12.  Align and use a zigzag stitch to attach the flap to the back piece of the purse. Make sure to center it.

      13.  Put right sides together and sew the 2 sides and bottom of the purse with a 3/8" to 1/2" seam. Make sure to use a Stay Stitch the beginning and end of your sewing so that the stitches stay put.

      14.  Turn the bags right side out and square the corners as much as possible. I used the backside of a Sharpie marker to help square the corners. Remember I slightly rounded them so they won't be perfectly square. Smooth bags flat.

      15.  Measure the center of the flap and use a KAM awl to poke a hole for the KAM plastic snap that you will adding. I am only going through 1 layer of Marine Vinyl so a Standard Prong snap will work. If you are using thicker material or multiple layers, I would recommend our Long Prong KAM plastic snaps.

      16.  Install KAM plastic snap (Cap and Socket).

      17.  Repeat in front of the bag, where KAM plastic snap lines up. I poked the hole through both layers at once so that I had a point of reference. Then I widened the hole after double-checking the placement of the internal hole. Install KAM plastic snap (Cap and Stud).

      18.  I think they turned out super cute! Now to add shoulder straps.

      19.  For the sake of time and my sanity, I simply attached the shoulder straps with a half of a KAM snap set (Cap and Socket). I used the snap like a rivet. I also used Long Prong KAM plastic snaps for this piece because I was working with the thickness of the Marine Vinyl and Cotton Webbing. *I doubled the edge of the Cotton Webbing over on itself and sewed a straight line back and forth across it a half dozen times so it doesn't unravel.  With Polyester Webbing, you could melt the edge to secure it.

      20.  Tada!!! I think they turned out great, it took less than 2 hours to make both of them, and my little cat lovers are ecstatic. They have a new place to store their treasures.

      😻 😻 😻


      I Like Big Buttons! Unpaper Towel Tutorials October 17 2018

      Unpaper Towel pic9

      Unpaper towels make a great, attractive, and functional that you can make for you and your loved ones.  We have 3 easy tutorials that show you how to make them.  Standard Sewing Machine, Serger, or "No Sew" just pick your skill level and you can have these decorative and functional unpaper towels in your kitchen.

      Unpaper Towels with a Sewing Machine

      Unpaper Towels with a Serger

      "No Sew" Unpaper Towels with KAM Snaps


      An I Like Big Buttons Christmas! Idea #10: How to Make a Hanging Kitchen Towel with KAM Snaps December 08 2017

      

      Kitchen Towel with KAM Snaps pic 14

      Gift Idea #10:

      Hanging Kitchen Towels are easy to make, functional, and add a nice punch of color to any kitchen. 

      Supplies:

      Instructions:

      1.   My towel is 12" wide so I decided to do 4 sets of KAM Snaps to make sure the towel doesn't sag.  With a ruler and a marker, I marked 1/4" down x 1" in on each corner and then 3" over from each corner mark. See More

      Pin for Later: https://www.pinterest.com/pin/201184308328848275/

      #ilikebigbuttons #shopilikebigbuttons #kamsnaps #plasticsnaps #kitchengear #kitchenideas #snapping #itsasnap #christmasidea #gift #christmasgift


      An I Like Big Buttons Christmas! Idea #7: How to make a Bandana Bib with KAM Snaps and a PDF Pattern December 05 2017

      Gift idea #7:  One of our most popular tutorials, Bandana Bibs are a great gift for those little droolers and mess makers in your life or as an outfit accessory. So cute!  I, also, used our Heart Shaped KAM Snaps for added pizazz, check it out!

      Supplies:

      Instructions:

      1. Download the Bandana Bib PDF Pattern.  Print out the pattern making sure the 1″ square in the corner measures 1″ square when printed that will indicate the pattern is the right size.  ... See More

      Pin it for later: http://www.pinterest.com/pin/201184308328918372/

      ‪#‎ilikebigbuttons‬ ‪#‎kamsnaps‬ ‪#‎plasticsnaps #bandanabib #droolbib #tutorial #pdfpattern #shopilikebigbuttons

      Snapping is so easy! You can do it!


      An I Like Big Buttons Christmas! Idea #1: How To Make Unpaper Towels with KAM Snaps November 14 2017

      Unpaper Towel pic9

      Only 41 days until Christmas, how did that happen !?!

      Gift Idea #1

      An I Like Big Buttons Christmas! Idea #7:  3 Ways To Make Unpaper Towels with KAM Snaps:  Unpaper towels make a great, attractive, and functional gift for your loved ones.  We have 3 easy tutorials that show you how to make them.  Standard Sewing Machine, Serger, or "No Sew" just pick your skill level and you can have these decorative and functional unpaper towels in your kitchen.

      Supplies:

      Instructions:

      1. Choose your flannel, I went to Etsy, of course, and found almost too many choices :).  I finally settled on Moda's Marmalade collection.  See More

      #ilikebigbuttons #kamsnaps #plasticsnaps #unpapertowels #christmasideas #shoplikebigbuttons #christmascountdown #christmastime #gifts #christmasgifts

      Unpaper Towel pic10

      unpaper towel micro fiber pic6

      © ILikeBigButtons.com and I Like Big Buttons Blog, 2017.


      Our 5 Most Popular KAM Plastic Snap Tutorials For Babies & Toddlers - I Like Big Buttons! September 12 2017

      

      KAM plastic snaps are a SNAP to use and work almost anywhere Velcro or sewable button can be used. Here are some great Baby and Toddler KAM plastic snap tutorials from our KAM Plastic Snap Project Page!

      #1 - Bib Bandana with KAM Plastic Snaps and a PDF Pattern

      #2 - Sensory Ribbon Baby Tag Blanket with KAM Plastic Snaps and Pacifier Supplies

      #3 - The Ultimate Catch-All Bib with KAM Plastic Snaps

      #4 - “No Sew” Leash for a Toddler Cup with KAM Plastic Snaps

      #5 - A Cover Button Metal Pacifier Clips with Cover Buttons, Round Faced Metal Suspender Clips, and KAM Plastic Snaps

      Cover Button Metal Pacifier Clips pic23

      Save

      I Like Big Buttons! How To Apply KAM Plastic Snaps With Hand Pliers August 28 2017

      How To Apply KAM Plastic Snaps With Hand Pliers Slideshow:

      OR

      How To Apply KAM Plastic Snaps With Hand Pliers Video:

      Today I spent the day laying out a photo slideshow of how to apply KAM plastic snaps with hand pliers. Installing snaps is, well, a SNAP to do! Check out how simple it is below.

      Supplies:

       

      1. Use the Awl to poke a hole where you want to install the KAM plastic snap.

      2. Press the plastic snap Cap through the hole created by the Awl. The prong of the Cap will be visible.

      3. Settle the Socket over the prong shaft.

      4. Use the Hand Pliers to install the Cap and Socket together.

      5. The Cap should be securely nestled in the die before you apply pressure. I am using Size 20 snaps so the T5 die is installed. Each size of snap has a correlating die.

      6. Apply firm hand pressure. The rubber head should bulge slightly as pictured.

      7. The prong of the Cap is now flattened. When formed, the prong will compress and form a 'mushroom' shape to hold the Cap and Socket together.

      8. Repeat steps to create the Stud side of the snap. Create a hole with the Awl and insert the Cap. The prong of the Cap will be visible.

      9. Settle the Stud over the prong shaft.

      9. Use the Hand Pliers to install the Cap and Stud together.

      10. Apply firm hand pressure. The rubber stopper should bulge slightly.

      11. The prong of the Cap is now flattened. When formed, the prong will compress and form a 'mushroom' shape to hold the Cap and Stud together.

      12. Now simply press the snaps sides together.

      13. You have created a plastic snap that is durable, functional, and adds a colorful finish to your project.

       

      14. Both sides of your snap have a clean finished look.

      15. Happy Snapping!!!

      Save

      Back to the top