News

Pack An Order With Us @ ILikeBigButtons.com January 31 2022

I thought you might enjoy a glimpse inside the order preparation and shipping process at ILikeBigButtons.com -- This order was a fun one! 50+ crafty items in a variety of finishes and sizes. Cover Button DIY Kits, Badge Reels, Flat Back Cover Buttons, Template & Tools, Key Fob Hardware, Barrettes & Bobby Pins, & Wire Back Cover Buttons! Oh My! You all like to keep me on my toes!

Shop with confidence!

Where to find us:

Thank you for your interest! Have a great crafty week!

I Like Big Buttons and crew!


Fabric Cover Buttons - Easy Peasy, Beautiful Impact! @ ILikeBigButtons.com August 19 2021


These aren't your grandma's Cover Buttons!!! Well, actually they are 😉 only better, with so many, many great uses for them.

💜 Flat Backs are used for crafts where you would like to glue a cover button: jewelry, bracelets, rings, earrings, necklaces, bobby pins and barrettes, scrapbooking, and much more.

💙 Wire Backs are used for fabric cover buttons in sewing, shoes, clothing, ponytail holders and much, much more.

Here are the 7 sizes we carry. From 1/2", which is about as small as your pinky nail, all the way up to 1 7/8" in diameter, about the size of the round side of a kiwi fruit.

We carry them in both flat back (glueable) and wire back (sewable).

• Size 20 (1/2 inch / 12 mm)
• Size 24 (5/8 inch / 15 mm)
• Size 30 (3/4 inch / 19 mm)
• Size 36 (7/8 inch / 23 mm)
• Size 45 (1 1/8 inch / 28 mm)
• Size 60 (1 1/2 inch / 38 mm)
• Size 75 (1 7/8 inch / 48 mm)

Assembling fabric Cover Buttons is fast and simple. In just seconds, you will have a button ready for your latest craft project.

Inspiration Board: Fabric Cover Buttons

 


How to Make Fabric Cover Buttons @ ILikeBigButtons.com February 02 2021

How To Make A Fabric Cover Button How To Make A Fabric Cover Button How To Make A Fabric Cover Button
How To Make A Fabric Cover Button How To Make A Fabric Cover Button How To Make A Fabric Cover Button
How To Make A Fabric Cover Button How To Make A Fabric Cover Button How To Make A Fabric Cover Button
How To Make A Fabric Cover Button How To Make A Fabric Cover Button How To Make A Fabric Cover Button
How To Make A Fabric Cover Button How To Make A Fabric Cover Button How To Make A Fabric Cover Button

How to Make Fabric Cover Buttons:

Cover Buttons are easy to assemble:

  1. Cut your fabric scrap. You will want a circle that is about twice the diameter of your button blank.
  2. Put your fabric piece in the larger assembly tool piece (RIGHT SIDE DOWN). When you look into the tool you want to see the back of the fabric.
  3. Place the button front (the domed piece) on top of the fabric. Leave the fabric edges hanging out.
  4. Press the cover button edges down into the tool.
  5. Place the back cover button piece on top of your fabric and button front. If the cover button will be subject to repeated tugging from the back, you may want to add a little e6000 adhesive before attaching the back.
  6. Take the smaller piece of the assembly tool and with the open side down place it on the button back.
  7. Press down. You may hear a pop when the last bit of the button back slips into place. If you take the tool out and the button is not completely secured, just put it back in and press down again.
  8. When you take the small assembly tool piece off, the fabric edges will be secured underneath the button back.
  9. Remove the button from the larger assembly tool piece.
  10. Tada!

To see other great Fabric Cover Button ideas, visit our DIY Project section here.


Size 24 (5/8 inch / 15 mm) Self Cover Buttons by ILikeBigButtons.com February 26 2020

We love our Cover Buttons! Easy to make and versatile they are one of my favorite go-to craft supplies.

We carry them in 7 great sizes. The second smallest, Size 24 (5/8"), is just slightly larger in diameter than a Skittle or M&M and available in both Wire Back (sewable) and Flat Back (glueable).

Size 24 (5/8 inch / 15 mm)

Size Reference

 

I Like Big Buttons! 💘 Cover Button Love Sale 💘

Cover Button Sets and Cover Button DIY Kits are 10% OFF | No Coupon Necessary

Time to Stock up!

Good Through February 29, 2020.
 

 

Size 24 Cover Buttons are great for smaller projects:

Lace & Fabric Cover Button Earrings

Fabric Cover Button Mini Clothespins

Fabric Cover Button Bobby Pins

Fabric Cover Buttons for your favorite outfit

Scrapbooking or Card Making

And Much, Much More

 

To see other great Fabric Cover Button ideas, visit our DIY Project section here.


How To Make A Self Fabric Cover Button: 7 Fabric Cover Button Sizes February 21 2020

Easy Peasy! So Much Fun!

Cover Button Tips:

  • The size of the fabric circle for each Cover Button size should be approximately twice the diameter of your button blank. If you would like a matching sized reusable plastic circle template, simply choose "Add Template" from the drop-down menu and the correct sized tool will be added to your order.
  • When the circle of fabric and Cover Button Cap are snugly situated in the clear base of the Cover Button tool, flip the tool over and double-check the positioning of your fabric. If it has a pattern, you will see a preview of how the button will form and can make adjustments to the fabric before you install the back.
  • You may want to add a dab of E6000 or comparable adhesive before installing the Cover Button Back as a precaution to ensure a permanent hold.
  • Save your fingers: Tip #1 - Use the backside of a permanent marker or comparable item on the smaller sized Cover Button Caps to press them into the clear base of the Cover Button tool.
  • Save your fingers: Tip #2 - Take a flat piece of wood and use it to apply even downward pressure on the pink plunger of the Cover Button installation tool when installing the back.  Not so much pressure that you flatten the button, just until it pops into place.
  • To remove the Cover Button from the clear base once it has been formed, bend the mold slightly and push up from the bottom to pop out the button.

Size 20 (1/2 inch / 12 mm) Self Cover Buttons by ILikeBigButtons.com February 20 2020

We love our Cover Buttons! Easy to make and versatile they are one of my favorite go-to craft supplies.

We carry them in 7 great sizes. The smallest, Size 20 (1/2"), is about the size of your pinky nail in both Wire Back (sewable) and Flat Back (glueable).

 

Size 20 (1/2 inch / 12 mm)

Size Reference

I Like Big Buttons! 💘 Cover Button Love Sale 💘

Cover Button Sets and Cover Button DIY Kits are 10% OFF | No Coupon Necessary

Time to Stock up!

Good Through February 29, 2020.

 

Size 20 Cover Buttons are great for small projects:

Stud-sized Fabric Cover Button Earrings

Fabric Cover Button Bracelet

Fabric Cover Button Bobby Pins

Fabric Cover Buttons for your favorite outfit

Scrapbooking or Card Making

And Much, Much More

 

To see other great Fabric Cover Button ideas, visit our DIY Project section here.


Fabric Cover Buttons - Easy To Make, Great Impact! @ ILikeBigButtons.com February 06 2020

cover-buttons-slide-show-pic_with-words_1

These aren't your grandma's Cover Buttons!!! Well, actually they are ;) only better, with so many many great uses for them.

Flat Backs are used for crafts where you would like to glue a cover button: jewelry, bracelets, rings, earrings, necklaces, bobby pins and barrettes, scrapbooking, and much more.

Wire Backs are used for fabric cover buttons in sewing, shoes, clothing, ponytail holders and much, much more.

Here are the 7 sizes we carry. From 1/2", which is about as small as your pinky nail, all the way up to 1 7/8" in diameter, about the size of the round side of a kiwi fruit. We carry them in both flat back (glueable) and wire back (sewable).

Assembling fabric Cover Buttons is fast and simple. In just seconds, you will have a button ready for your latest craft project.

 

Our I Like Big Buttons! 💘 Cover Button Love Sale 💘

Cover Button Sets and Cover Button DIY Kits are 10% OFF

No Coupon Necessary | Good Through February 29, 2020.

 

See our pictorial below:

How to Make Fabric Cover Buttons:

Cover Buttons are easy to assemble:

  1. Cut your fabric scrap. You will want a circle that is about twice the diameter of your button blank.
  2. Put your fabric piece in the larger assembly tool piece (RIGHT SIDE DOWN). When you look into the tool you want to see the back of the fabric.
  3. Place the button front (the domed piece) on top of the fabric. Leave the fabric edges hanging out.
  4. Press the cover button edges down into the tool.
  5. Place the back cover button piece on top of your fabric and button front. If the cover button will be subject to repeated tugging from the back, you may want to add a little e6000 adhesive before attaching the back.
  6. Take the smaller piece of the assembly tool and with the open side down place it on the button back.
  7. Press down. You may hear a pop when the last bit of the button back slips into place. If you take the tool out and the button is not completely secured, just put it back in and press down again.
  8. When you take the small assembly tool piece off, the fabric edges will be secured underneath the button back.
  9. Remove the button from the larger assembly tool piece.
  10. Tada!

To see other great Fabric Cover Button ideas, visit our DIY Project section here.


I Like Big Buttons! - Fabric Cover Buttons - Easy To Make, Great Impact! October 09 2018

cover-buttons-slide-show-pic_with-words_1

These aren't your grandma's Cover Buttons!!! Well, actually they are ;) only better, with so many many great uses for them.

Flat Backs are used for crafts where you would like to glue a cover button: jewelry, bracelets, rings, earrings, necklaces, bobby pins and barrettes, scrapbooking, and much more.

Wire Backs are used for fabric cover buttons in sewing, shoes, clothing, ponytail holders and much, much more.

Here are the 7 sizes we carry. From 1/2", which is about as small as your pinky nail, all the way up to 1 7/8" in diameter, about the size of the round side of a kiwi fruit. We carry them in both flat back (glueable) and wire back (sewable).

Assembling fabric Cover Buttons is fast and simple. In just seconds, you will have a button ready for your latest craft project.

See our pictorial below:

How to Make Fabric Cover Buttons:

Cover Buttons are easy to assemble:

  1. Cut your fabric scrap. You will want a circle that is about twice the diameter of your button blank.
  2. Put your fabric piece in the larger assembly tool piece (RIGHT SIDE DOWN). When you look into the tool you want to see the back of the fabric.
  3. Place the button front (the domed piece) on top of the fabric. Leave the fabric edges hanging out.
  4. Press the cover button edges down into the tool.
  5. Place the back cover button piece on top of your fabric and button front. If the cover button will be subject to repeated tugging from the back, you may want to add a little e6000 adhesive before attaching the back.
  6. Take the smaller piece of the assembly tool and with the open side down place it on the button back.
  7. Press down. You may hear a pop when the last bit of the button back slips into place. If you take the tool out and the button is not completely secured, just put it back in and press down again.
  8. When you take the small assembly tool piece off, the fabric edges will be secured underneath the button back.
  9. Remove the button from the larger assembly tool piece.
  10. Tada!

To see other great Fabric Cover Button ideas, visit our DIY Project section here.


Our 5 Most Popular Cover Button Tutorials - I Like Big Buttons! September 19 2017

These aren't your grandma's Cover Buttons!!! Well actually they are ;) only better, with so many many great uses for them.

Flat Backs are used for crafts were you would like to glue a cover button: jewelry, bracelets, rings, earrings, necklaces, bobby pins and barrettes, scrap booking, and much more.

Wire Backs are used for fabric cover buttons in sewing, shoes, clothing, pony tail holders and much, much more.

Here are our 5 most popular Cover Button Tutorials:

#1 - Fabric Cover Button Push Pins

#2 - Fabric Cover Button Badge Reels

#3 - Fabric Cover Button Paper Clip Bookmarks

#4 - Lace and Fabric Cover Button Earrings

#5 - Fabric Cover Button Snap Barrettes


Fabric Cover Buttons @ I Like Big Buttons! August 07 2017

cover-buttons-slide-show-pic_with-words_1

We love our Cover Buttons! Easy to make and versatile they are one of my favorite go to craft supplies.

💜💙💚💛❤️💜💙💚💛❤️💜💙💚💛❤️💜💙💚💛❤️💜💙💚💛❤️💜💙💚💛❤️💜💙💚💛❤️

Take 12% off your Cover Button order over $55 until Wednesday, August 9th with coupon code: BUTTONLOVE

💜💙💚💛❤️💜💙💚💛❤️💜💙💚💛❤️💜💙💚💛❤️💜💙💚💛❤️💜💙💚💛❤️💜💙💚💛❤️

Flat Backs are used for crafts were you would like to glue a cover button: jewelry, bracelets, rings, earrings, necklaces, bobby pins and barrettes, scrap booking, and much more.

Wire Backs are used for fabric cover buttons in sewing, shoes, clothing, pony tail holders and much, much more.

Here are the 7 sizes we carry. From 1/2", which is about as small as your pinky nail, all the way up to 1 7/8" in diameter, about the size of the round side of a kiwi fruit. We carry them in both flat back (glueable) and wire back (sewable).

Assembling fabric Cover Buttons is fast and simple. In just seconds, you will have a button ready for your latest craft project.

See our pictorial below:

How to Make Fabric Cover Buttons:

Cover Buttons are easy to assemble:

  1. Cut your fabric scrap. You will want a circle that is about twice the diameter of your button blank.
  2. Put your fabric piece in the larger assembly tool piece (RIGHT SIDE DOWN). When you look into the tool you want to see the back of the fabric.
  3. Place the button front (the domed piece) on top of the fabric. Leave the fabric edges hanging out.
  4. Press the cover button edges down into the tool.
  5. Place the back cover button piece on top of your fabric and button front. If the cover button will be subject to repeated tugging from the back, you may want to add a little e6000 adhesive before attaching the back.
  6. Take the smaller piece of the assembly tool and with the open side down place it on the button back.
  7. Press down. You may hear a pop when the last bit of the button back slips into place. If you take the tool out and the button is not completely secured, just put it back in and press down again.
  8. When you take the small assembly tool piece off, the fabric edges will be secured underneath the button back.
  9. Remove the button from the larger assembly tool piece.
  10. Tada!

To see other great Fabric Cover Button ideas, visit our DIY Project section here.


I Like Big Buttons! - 7 Fabric Cover Button Sizes October 18 2016

cover-buttons-slide-show-pic_with-words_1

Assembling fabric Cover Buttons is easy and fun, here are the 7 sizes we carry. Our buttons range from 1/2" to 1 7/8" in diameter. We also carry them in both flat back (glueable) and wire back (sewable). Check out our website for more Cover Button tutorials, tips and crafty ideas.

Try our Cover Buttons today using Coupon Code (10% off Cover Buttons on our site until 10/23/16): BUTTONLOVE


Cover Button FAQs: Wire Back vs Flat Back September 13 2016

  • Assembling fabric covered buttons is easy and fun but did you know there are two distinct kinds?
  • Wire Back or Shank Back, as they are sometimes called, are sew able and meant to be attached with a thread and needle to your sewing project.
  • Flat Back are glue able and meant to be attached to your craft project with glue to a flat surface or glue pad.

I Like Big Buttons! - Wire Back vs Flat Back

To see other great Fabric Cover Button ideas, visit our DIY Project section here.


Cover Button FAQs: How To Convert Wire Back To Flat Back Tip #2 April 13 2016

    • Assembling fabric covered buttons is easy and fun but did you know you can convert Wire Back Cover Buttons to Flat Back Cover Buttons in 1 simple step?

    • Watch how easy it is below:

    I Like Big Buttons! - How To Covert Wire Back To Flat Back

    To see other great Fabric Cover Button ideas, visit our DIY Project section here.


    Just received this Awesome note from one of our Amazing customers about our Cover Buttons!!! September 11 2014

    Just received this Awesome note from one of our Amazing customers:

    "Hello there!! Yesterday I received the special size 30 cover buttons kit to make a start of 10 buttons and oh my gosh they are fantastic!!! So I just placed an order...!! I am so hooked!!!! Excellent shipping too!! P.S. even my 17 year old son thought they were cool to make!!!... I will be leaving you excellent feedback too!! Looking forward to getting the other stuff that I have just ordered too!!! Thank you!! Sincerely Cindy"

    :) That is wonderful! I am so glad you like them. They are so easy and fun to make! Thank you for taking the time to share your joy :)! Have a great week! Thank you, I Like Big Buttons!

    Have you checked out our Cover Buttons recently? If not here's a link to them in our store.

    You can make so many great things with Cover Buttons.

    How to cover button pic14

    Embellished Cover Button Badge Reels:

    Badge Reels pic 6

    Cover Button Earrings:

    Earring pic 6

    Cover Button Cufflinks:

    cufflink pic 4

    Cover Button Paper Clips:

    Paper Clip pic 6

    Cover Button Push Pins:

    Push Pins pic 4

    Cover Button Bobby Pins:

    Bobby Pins pic 4

    Cover Button Barrettes:

    Snap Barrettes Pic 5

    And Cover Button Ponytail Holders:

    how to ponytail holder pic12

    These are just a few of the options. Check out all our tutorials here.


    Back to the top