News

Pronged Stud Tutorial: Stackable KAM Plastic Snaps by I Like Big Buttons! August 19 2020

Pronged studs enable snap stacking. They take the place of a cap and allow your item to be snapped from both sides. While typically used to make a double-sided snap, they can be daisy-chained.

They are available in as few as 25, 100, and 1000 pieces.

Pronged Studs pic3

Here is a simple tutorial to show the versatility of Pronged Studs.

Supplies:

1. Plan your layered flower, insert the Snap Cap through the first layer and back it with a socket. Form the KAM plastic snap.

2. Insert a Pronged Stud through the second layer and back it with a stud. Form the Pronged Stud and Stud together using the pronged stud die into the bottom of your press, and stud die into the top of your press.

3. Insert a Pronged Stud through the third layer and back it with a socket. Form the Pronged Stud and Socket together using the pronged stud die into the bottom of your press, and socket die into the top of your press.

4. Insert the Snap Cap through the fourth layer and back it with a socket. Form the KAM plastic snap.

5. Now snap all the layers together and enjoy!

6. Tada! Below is a close up for how they stack together. Pronged studs enable snap stacking. They take the place of a cap and allow your item to be snapped from both sides. While typically used to make a double-sided snap, they can be daisy-chained infinitely.

Pronged Studs:

A stud or socket can be installed on the other side of the pronged stud. Just insert the pronged stud die into the bottom of your press, and the socket or stud die into the top of your press.

Pronged Studs pic1

Pronged Studs pic2

© ILikeBigButtons.com and I Like Big Buttons Blog, 2020.


New! Pronged Studs for creating Double Sided Snaps August 04 2014

Β 

Β 

New Arrivals!!! Pronged Studs are used to make double sided snaps which are great for making convertible diapers and much more.

To celebrate their arrival, they are 10% off right now on our website!

As usual , they are available in as few as 10 or 25 pieces all the way up to 1000 pieces.

Check them out now!

* These parts require a DK-98 press, size 20 pronged stud die, and size 20 three piece die set to install (all in stock on our website).

Β 

Β 

Β 


Back to the top