Tag Sensory Blankets @ ILikeBigButtons.com September 09 2021

I love making these because they are simple, my babies loved them, and they are easy to sew.

Link to Tag Sensory Blanket Tutorial

Water Bottle Charm Markers @ ILikeBigButtons.com June 15 2021

Congratulations, Class of 2021!!! We had a graduate this year. We are still trying to wrap our mind around it, given that we just brought her home from the hospital not so long ago, but now we are celebrating her like she is a Rockstar! 

We were able to throw her a celebration with our family and closest friends. To make the "Whose Water Bottle is Whose?" game more manageable, we raided our Pacifier Supplies inventory and used O-Ring Pacifier Adapters in all 14 colors to mark the water bottles, so they were unique.

It is as simple as placing an O-Ring over the bottle cap. The O-Rings nestle snuggly just under the rim and can be slipped back off and washed for reuse.

To see this tutorial and other I Like Big Buttons! Crafty Ideas visit our Craft Inspiration Boards here.

Hands-free Water Bottle Holder @ ILikeBigButtons.com June 11 2021

My oldest is headed off on a class trip to Silverwood Theme Park. Rollercoaster rides, caramel apples, sunshine, and lots of laughter. A hands-free Water Bottle, so she can keep moving and not worry about keeping hydrated, is a must.

I made a couple of quick water bottle holders from ILikeBigButtons.com craft supplies.

Here is what you will need:

• MAM Rings
• KAM Plastic Snaps & Pliers
• A Piece of Ribbon

Making a Fabric Cover Button Metal Pacifier Clip @ ILikeBigButtons.com February 26 2021

Supplies:

• 2 KAM Snap Sets
• KAM Snap Pliers and Awl
• Round Faced Metal Clips or Enamel Pacifier Clips
• 1 Size 36 Flat Back Cover Button
• Size 36 Assembly Tool
• Size 36 Template
• Fabric Scraps
• E6000 Adhesive
• Pre-made Pacifier Clips (see Pacifier Clip and Supply Tutorials)

Instructions:

1. Using our Pacifier Clip and Supply Tutorials make either Ribbon or Fabric Pacifier Clips.
2. Cut your fabric scrap. You will want a circle that is about twice the diameter of your button blank.  I cut out a Piece of Fabric using my Size 36 Template.
3. Put your fabric piece in the larger assembly tool piece (RIGHT SIDE DOWN). When you look into the tool you want to see the back of the fabric.
4. Place the button front (the domed piece) on top of the fabric. Leave the fabric edges hanging out.  Double check the transparent underside to see if your print is how you would like it.   Then press the cover button fabric edges down into the tool.
5. Add a dab of E6000 Adhesive to the middle of the cover button cap before installing the Flat Back.
6. Place the back cover button piece on top of your fabric and button front.
7. Take the smaller piece of the assembly tool and with the open side down place it on the button back.
8. Press down. You may hear a pop when the last bit of the button back slips into place. If you take the tool out and the button is not completely secured, just put it back in and press down again.
9. When you take the small assembly tool piece off, the fabric edges will be secured underneath the button back.
10. Remove the button from the larger assembly tool piece.  Tada!  My Cover Button is ready to be adhered to a Round Faced Metal Clip.
11. Here are the Cover Buttons I made in just a few minutes.  Seriously easy, fun and so cute!
12. Now take the E6000 Adhesive and put a medium size dab of glue on the back of the cover button about 1/2 of what would fill the back area of the back.  This glue is great to work with so don't overly worry about getting the amount right.  I was able to cleanly wipe of any excess off when I put on too much and I was also able to remove the button and add a little more when I under did it.  This glue is very forgiving.
13. Now place the Cover Button over the Round Faced Metal Pacifier Clips and straighten and center your button.
14. Press firmly and let set to dry and cure 24-72 hours as recommended by the manufacturer (E6000).
15. These are my finished products.  I love them and think they turned out beautifully.  Below are my examples, completed and installed on Pacifier Clips.

16. Tada!!!

Disclaimer:  Keep in mind that although I have rough tested these I in no way recommend you leave your baby alone with these as there are small pieces and if not done properly they may come apart and become a choking hazard.  I would recommend these clips under adult supervision only.  The maker and/or parent assumes full responsibility when using these pacifier clips.

Jean Pacifier Clip with Fabric Rosette November 16 2020

Supplies for a Recycled Jean Pacifier Clip with Fabric Rosette:

• 1 Pair of Holey Jeans
• 1 1/2" to 2" x 24" long strip of Fabric
• 1 KAM Plastic Pacifier Clip
• 1 KAM Snap Sets
• KAM Snap Pliers and Awl
• Sewing Clips
• Standard Sewing Machine
• Hot Glue Gun
• Fabri-Tac - Fabric Adhesive

Instructions:

1. Using an old, holey pair of Jeans cut two 1 1/2" x 14" strips of material.
2. Use Sewing Clips to hold the material, wrong sides together, right sides facing out.
3. Stitch around the strip of fabric about a 1/4 to 3/8" in all the way around making sure to backstitch at the start and end.
4. Pull on the edges to fray the jean material up to the stitch you made.  I used a crafty child :) with a cutting board and a fork.  It will also fray over time but I was going for this look.
5. To make the Fabric Rosette, fold the fabric in half, wrong sides together, two times.  You will end up with about 1/2" or less strip of fabric 24" long.  I used an iron to fold it, not so much that it was completely flat, just enough that it held its shape.  Start at one end and hot glue the first bit of it back against itself.
6. Continue this ever so often so that the 'bud' stays together.
7. Make the bud or center of the rose about 1/2" in diameter.  Add one last drop of hot glue.
8. Now twist the fabric 360 degrees, so that the bottom becomes the top.  Tack it with a small bead of hot glue and repeat.
9. Continue twisting and gluing until you run out of fabric or until you reach the desired size of your rosette.
10. It will look like this when you are finished.
11. Glue the last bit of fabric on the underside of the Rosette securely with hot glue.
12. For a more finished look, I added a circle of felt to the bottom with Fabri-Tac.
13. Put the KAM Plastic Pacifier Clip on the Fabric strip about 1″ in.
14. Fold back 1″ of the strip back onto itself.
15. Straight stitch across the fabric strip just behind the KAM Plastic Pacifier Clip.  Make sure to set the stitch.
16. Make sure that the internal snap in a comfortable distance to accommodate the width of the handle, I spaced my KAM Snaps about 2″ apart using the Pacifier I have with the biggest handle.
17. Now on the side where the Pacifier will be attached, I installed a Cap and Socket about 1/2″ from the edge.  I used Size 20 snaps for this tutorial but either Size 20 or Size 16 will work great.
18. Add Fabric Rosette with Fabri-Tac to the Pacifier Clip just above the clip.
19. Now snap the Pacifier in place, attach to your child’s outfit and go.
20. Tada!  Okay, I think I am in love.  Super cute!  Happy Snapping!!!  To see our other great Pacifier Clip Tutorial and KAM Plastic Snap Ideas and buy these supplies visit I Like Big Buttons.com.

Disclaimer:  Keep in mind that although I have rough tested these I in no way recommend you leave your baby alone with these as there are small pieces and if not done properly they may come apart and become a choking hazard.  I would recommend these clips under adult supervision only.  The maker and/or parent assumes full responsibility when using these pacifier clips.

"No Sew" Pacifier Clip with KAM Snaps and Enamel Clip by ILikeBigButtons.com November 03 2020

Supplies for a "No Sew" Pacifier Clip:

• Pacifier with Hinged Handle
• 14-15" of 7/8" Grosgrain Ribbon
• 1 Enamel Clip or Plastic Clip
• 2 KAM Snap Sets
• KAM Snap Pliers and Awl
• Fabric Tac
• Lighter or Chef's Torch

Instructions:

1. Choose a 7/8" or 3/4" Grosgrain Ribbon, cut a 14" to 16" length of ribbon.  I did 7/8" Grosgrain Ribbon and I cut it 16" long so when it was completed it was approximately 12" long.
2. The ribbon I was using was made of polyester so I used a lighter to seal the ends of the ribbon so it doesn't fray.  (If you are unsure, you may want to practice on a scrap piece if this is your first time or you are unsure of what the material is made of.)
3. Then I used a bit of Fabric Tac and folded over 1" of the ribbon back on itself to reinforce the ribbon and pressed it firmly and let it dry.  Repeat on the opposite end.
4. Once dry, I installed a Cap and Socket in each end of the ribbon about 1/2" from the edge.  I used Size 20 snaps for this tutorial but either Size 20 or Size 16 will work great.
5. On the side that will hold the Enamel Clip, I simply folded the ribbon over at the 1" mark and installed a Cap and Stud where it would meet.  I, then, feed the Enamel Clip onto the ribbon and snapped it into place.  It may have been easier to thread on the pacifier clip before installing any Snap parts but I was able to feed it through without much trouble.
6. Now on the side where the Pacifier will be attached, adjust the internal snap at a comfortable distance to accommodate the width of the handle.  I went an additional 1/2" for the Pacifier, I used.
7. Now snap the Pacifier in place, attach to your child's shirt and go.
8. Tada!  Happy Snapping!!!

An I Like Big Buttons Christmas! Idea #9: How To Make Pacifier Clips December 07 2017

Gift Idea #9:

Pacifier Clips are easy to make, fun to embellish, and a great useful gift for a new mom and baby.

Supplies:

• Pacifier with Button Style Grip
• 14" x 3 1/2" Piece of Fabric
• 1 Pacifier Clip per Clip
• 2 KAM Snap Sets per Clip
• KAM Snap Pliers and Awl
• MAM Ring and O-Ring Button Style Adapters
• Standard Sewing Machine and Iron

Instructions:

1. Choose a piece of Fabric, cut it to the dimensions: 14" x 3 1/2", the finished product once ironed, folded and sewn will be approximately 7/8" wide x 12" long. [...]

#ilikebigbuttons #shopilikebigbuttons #kamsnaps #plasticsnaps #pacifiersupplies #pacifierclips #nosew #buttonstylepacifiers #craftsupplies #babygifts #christmasgifts #christmasideas #babysfirstchristmas

Here are our top 5 Pacifier Clip Tutorials:

#1 - A Cover Button Metal Pacifier Clips with Cover Buttons, Round Faced Metal Suspender Clips, and KAM Snaps

#2 - Jean Pacifier Clip with Rosette using KAM Plastic Snaps and Clip

#3 - "No Sew" Pacifier Clip with KAM Snaps, MAM Ring or O-Ring and a KAM Plastic Pacifier Clip for Button Style Pacifiers

#4 - Fabric Pacifier Clip with KAM Snaps, MAM Ring or O-Ring and a KAM Plastic Pacifier Clip for Button Style Pacifiers

#5 - Recycling Jeans into a Pacifier Clip using KAM Snaps and a Pacifier Clip

Our 5 Most Popular Pacifier Clip Tutorials - I Like Big Buttons! August 15 2017

Pacifier Clips are easy to make, fun to embellish, and a great useful gift for a new mom and baby. Here are our top 5 Pacifier Clip Tutorials:

#1 - A Cover Button Metal Pacifier Clips with Cover Buttons, Round Faced Metal Suspender Clips, and KAM Snaps

#2 - Jean Pacifier Clip with Rosette using KAM Plastic Snaps and Clip

#3 - "No Sew" Pacifier Clip with KAM Snaps, MAM Ring or O-Ring and an KAM Plastic Pacifier Clip for Button Style Pacifiers

#4 - Fabric Pacifier Clip with KAM Snaps, MAM Ring or O-Ring and an KAM Plastic Pacifier Clip for Button Style Pacifiers

#5 - Recycling Jeans into a Pacifier Clip using KAM Snaps and a Pacifier Clip

I Like Big Buttons! - How to make a Fabric Pacifier Clip with KAM Snaps, MAM Ring or O-Ring and an KAM Plastic Pacifier Clip for Button Style Pacifiers June 13 2017

Today, I am making a pretty Fabric Pacifier Clip for Button Style Pacifiers using our silicone MAM rings and O-Rings. Pretty & functional! :)

Supplies for a Fabric Pacifier Clip with Button Style Pacifier Adapters:

• Pacifier with Button Style Grip
• 14" x 3 1/2" Piece of Fabric
• 1 Pacifier Clip per Clip
• 2 KAM Snap Sets per Clip
• KAM Snap Pliers and Awl
• MAM Ring and O-Ring Button Style Adapters
• Standard Sewing Machine and Iron

Instructions:

1.  Choose a piece of Fabric, cut it to the dimensions: 14" x 3 1/2", the finished product once ironed, folded and sewn will be approximately 7/8" wide x 12" long.

2.  Fold both 3 1/2" wide ends in 1/4" and iron flat.

3.  Now fold and iron the fabric in half the long way (14" length).

4.  Then fold and iron again, bringing the outer edges to the middle "iron line" and iron along those edges. Repeat on other side.

5.  Re-iron the seam so that the Fabric is smooth and flat, it should now be 13 1/2" long x 7/8" wide.

6.  Open the top of the Fabric strip and trim the excess internal fabric at an angle so that there is less chance of the ends peeking out when sewn together.  Repeat on the other end.

7.  Pin the Fabric strip in a couple places to keep it in place.

8.   Sew a 1/8" seam all the way around the piece making sure to back stitch at the start and finish to set the seam.

9.  Now installed a Cap and Stud about 1/2" from the edge and the mating Cap and Socket about 1 1/2" later so that the center of the two KAM Snap parts are about 1 1/2" or more apart.  Any closer and I found I had trouble getting the MAM Ring or O-Ring Adapter to sit neatly inside.   I used Size 20 snaps for this tutorial but either Size 20 or Size 16 will work great.

10.  Repeat on the other side, that will hold the Pacifier Clip.  I, then, feed the Pacifier Clip and MAM Ring Adapter onto the ribbon and snapped it into place.  It may have been easier to thread on the pacifier clip before installing any Snap parts but I was able to feed it through without much trouble.

11.  Tada!  Now time to add the Pacifier.

12.  Simply stretch the MAM Ring or O-Ring around the Button Style Grip on the Pacifier and it will settle behind it and hold the Pacifier securely. Now snap the Pacifier in place, attach to your child's shirt and go.

13.  As pictured, the MAM Rings hold the same way as the O-Rings only with a less subtle profile.

14.  Tada!  Happy Snapping!!!

Water Bottle Marker/Charm Tutorial using MAM and O-Ring Pacifier Adapters August 24 2016

These adapter rings also can be used as water bottle markers or so you can easily attach your bottle to a clip.  Simply stretch the ring over the neck of a standard sized water bottle (~1”) to easily recognize your drink.  We carry 13 great ring colors to choose from.

*Take 10% our MAM and O-Ring Adapters with coupon code (thru Monday 8/29): RINGLOVE

Supplies:

• Standard Water Bottle (~1" mouth)
• MAM Ring Adapter or O-Ring Adapter

1.  Stretch Colored Ring Adapter of your choosing over the mouth of the bottle, just past the lip.

2.  So many uses.  Simply:

• Leave as a water bottle marker.
• Attach a carabiner clip and hang from your backpack, bag, belt loop or other.
• Hang from your lanyard for hands free carrying.

3.  Super easy and useful!  To see our Pacifier Clip Tutorials using MAM or O-Rings check them out here.

An I Like Big Buttons Christmas! Idea #6: How to make a Sensory Ribbon Baby Tag Blanket with KAM Snaps & Pacifier Supplies December 16 2015

Gift Idea #6:  Fun and functional, Sensory Ribbon Tag Blanket with BONUS accessories make a great gift for any sweet little person in your life.  Use KAM Snaps or a KAM Pacifier Clip to make your blanket attachable or unthrowable :).  Add KAM Snaps, MAM Pacifier Rings or Pacifier O-Rings to add a Pacifier holder to your tag blanket.  I used them all :P to show you the different options.

Supplies:

• 2 12″x12″ Pieces of Fabric (1 Cotton and 1 Minky)
• 8x 5″ Piece of Ribbons (mix of Grosgrain and Satin)
• 7x 8" Piece of Ribbons (mix of Grosgrain and Satin)
• 1x 12" Piece of Ribbon
• 1 KAM Snap Set
• KAM Snap Pliers and Awl
• 1 KAM Pacifier Clip
• 1 MAM Pacifier Ring
• 1 Pacifier O-Ring
• Standard Sewing Machine

Instructions:

1.  Cut the Fabric and Minky material to 12"x12" squares and cut your mix of ribbon 8 in 5" lengths, 7 in 8" lengths, and 1 in 12" length.  See More

#ilikebigbuttons #kamsnaps #plasticsnaps #sootherblanket #christmasideas

Adorable Pacifier Clips from House Of Jars May 14 2015

30 Days of KAM Snaps and Beyond!!! How to make Cover Button Metal Pacifier Clips with Cover Buttons, Round Faced Metal Suspender Clips and KAM Snaps September 24 2014

Day #35

How to make a Cover Button Metal Pacifier Clips with Cover Buttons, Round Faced Metal Suspender Clips and KAM Snaps

Today I am making Cover Button Pacifier Clips using Round Faced Metal Pacifier Clips (Metal Suspender Clips), Size 36 Cover Buttons, and KAM Snaps, of course ;).  I have had a lot of questions in the last year about how to make these clips so I decided to take it on.  Keep in mind that although I have rough tested these I in no way recommend you leave your baby alone with these as there are small pieces and if not done properly they may come apart and become a choking hazard.  I would recommend these clips under adult supervision only.  The maker and/or parent assumes full responsibility when using these pacifier clips.

That being said I did rough test these and was unable to break them apart after they had proper time to dry and cure.  I didn't take a hammer to them :) but I did my best to undo my hard work and was not able to.

Supplies:

• 2 KAM Snap Sets
• KAM Snap Pliers and Awl
• Round Faced Metal Clips or Enamel Pacifier Clips
• 1 Size 36 Flat Back Cover Button
• Size 36 Assembly Tool
• Size 36 Template
• Fabric Scraps
• E6000 Adhesive
• Pre-made Pacifier Clips (see Pacifier Clip and Supply Tutorials)

Instructions:

1.  Using our Pacifier Clip and Supply Tutorials make either Ribbon or Fabric Pacifier Clips.

2.  Cut your fabric scrap. You will want a circle that is about twice the diameter of your button blank.  I cut out a Piece of Fabric using my Size 36 Template.

3.  Put your fabric piece in the larger assembly tool piece (RIGHT SIDE DOWN). When you look into the tool you want to see the back of the fabric.

4.  Place the button front (the domed piece) on top of the fabric. Leave the fabric edges hanging out.  Double check the transparent underside to see if your print is how you would like it.   Then press the cover button fabric edges down into the tool.

5.  Add a dab of E6000 Adhesive to the middle of the cover button cap before installing the Flat Back.

6.  Place the back cover button piece on top of your fabric and button front.

7.  Take the smaller piece of the assembly tool and with the open side down place it on the button back.

8.  Press down. You may hear a pop when the last bit of the button back slips into place. If you take the tool out and the button is not completely secured, just put it back in and press down again.

9.  When you take the small assembly tool piece off, the fabric edges will be secured underneath the button back.

10.  Remove the button from the larger assembly tool piece.  Tada!  My Cover Button is ready to be adhered to a Round Faced Metal Clip.

11.  Here a the Cover Buttons I made in just a few minutes.  Seriously easy, fun and so cute!

12.  Now take the E6000 Adhesive and put a medium size dab of glue on the back of the cover button about 1/2 of what would fill the back area of the back.  This glue is great to work with so don't overly worry about getting the amount right.  I was able to cleanly wipe of any excess off when I put on too much and I was also able to remove the button and add a little more when I under did it.  This glue is very forgiving.

13.  Now place the Cover Button over the Round Faced Metal Pacifier Clips and straighten and center your button.

14.  Press firmly and let set to dry and cure 24-72 hours as recommended by the manufacturer (E6000).

15.  These are my finished products.  I love them and think they turned out beautifully.  Below are my examples, completed and installed on Pacifier Clips.

16.  Tada!!!

Disclaimer:  Keep in mind that although I have rough tested these I in no way recommend you leave your baby alone with these as there are small pieces and if not done properly they may come apart and become a choking hazard.  I would recommend these clips under adult supervision only.  The maker and/or parent assumes full responsibility when using these pacifier clips.

30 Days of KAM Snaps and Beyond!!! How to make a "No Sew" Pacifier Clip with KAM Snaps, MAM Ring or O-Ring and an KAM Plastic Pacifier Clip for Button Style Pacifiers September 05 2014

Day #33

How to make a "No Sew" Pacifier Clip with KAM Snaps, MAM Ring or O-Ring and an KAM Plastic Pacifier Clip for Button Style Pacifiers

Today, I am making a "No Sew" Pacifier Clip for Button Style Pacifiers using our silicone MAM rings and O-Rings.  No sewing necessary!

Supplies for a "No Sew" Pacifier Clip with Button Style Pacifier Adapters:

• Pacifier with Button Style Grip
• 16-18" of 1/2", 3/4" or 7/8" Grosgrain Ribbon
• 1 Enamel Clip or Plastic Clip per Clip
• 2 KAM Snap Sets per Clip
• KAM Snap Pliers and Awl
• MAM Ring and O-Ring Button Style Adapters
• Fabric Tac
• Lighter or Chef's Torch

Instructions:

1.  Choose a 7/8" or 3/4" or 1/2" Grosgrain Ribbon, cut a 16" to 18" length of ribbon.  I did some of each size of Grosgrain Ribbon and I cut them 16" long so when they were completed they was approximately 12" long.

2.  The ribbon I was using was made of polyester so I used a lighter to seal the ends of the ribbon so it doesn't fray.  (If you are unsure, you may want to practice on a scrap piece if this is your first time or you are unsure of the what the material is made of.)

3.  Then I used a bit of Fabric Tac and folded over an 2" to 1 1/2" of the ribbon back on itself to reinforce the ribbon and pressed it firmly and let it dry.  Repeat on the opposite end.

4.  Once dry, I installed a Cap and Stud in each end of the ribbon about 1/2" from the edge.  Then I installed the Cap and Socket about 1 1/2" apart so that the center of each KAM Snap is about 1 1/2" or more apart.  Any closer and I found I had trouble getting the MAM Ring or O-Ring Adapter to sit neatly inside.  I used Size 20 snaps for this tutorial but either Size 20 or Size 16 will work great.

5.  Repeat on the other side, that will hold the Pacifier Clip.  I, then, feed the Pacifier Clip and MAM Ring Adapter onto the ribbon and snapped it into place.  It may have been easier to thread on the pacifier clip before installing any Snap parts but I was able to feed it through without much trouble.

6.  Tada!  Now time to add the Pacifier.

7.  Simply stretch the MAM Ring or O-Ring around the Button Style Grip on the Pacifier and it will settle behind it and hold the Pacifier securely. Now snap the Pacifier in place, attach to your child's shirt and go.

8.  As pictured, the O-Rings hold the same way as the MAM Rings only with a more subtle profile.

9.  Tada!  Happy Snapping!!!

30 Days of KAM Snaps and Beyond!!! How to make a Fabric Pacifier Clip with KAM Snaps, MAM Ring or O-Ring and an KAM Plastic Pacifier Clip for Button Style Pacifiers August 27 2014

Day #32

Making a Fabric Pacifier Clip with KAM Snaps, MAM Ring or O-Ring and an KAM Plastic Pacifier Clip for Button Style Pacifiers

Today, I am making a pretty Fabric Pacifier Clip for Button Style Pacifiers using our silicone MAM rings and O-Rings. Pretty functional :)!!!

Supplies for a Fabric Pacifier Clip with Button Style Pacifier Adapters:

• Pacifier with Button Style Grip
• 14" x 3 1/2" Piece of Fabric
• 1 Pacifier Clip per Clip
• 2 KAM Snap Sets per Clip
• KAM Snap Pliers and Awl
• MAM Ring and O-Ring Button Style Adapters
• Standard Sewing Machine and Iron

Instructions:

1.  Choose a piece of Fabric, cut it to the dimensions: 14" x 3 1/2", the finished product once ironed, folded and sewn will be approximately 7/8" wide x 12" long.

2.  Fold both 3 1/2" wide ends in 1/4" and iron flat.

3.  Now fold and iron the fabric in half the long way (14" length).

4.  Then fold and iron again, bringing the outer edges to the middle "iron line" and iron along those edges. Repeat on other side.

5.  Re-iron the seam so that the Fabric is smooth and flat, it should now be 13 1/2" long x 7/8" wide.

6.  Open the top of the Fabric strip and trim the excess internal fabric at an angle so that there is less chance of the ends peeking out when sewn together.  Repeat on the other end.

7.  Pin the Fabric strip in a couple places to keep it in place.

8.   Sew a 1/8" seam all the way around the piece making sure to back stitch at the start and finish to set the seam.

9.  Now installed a Cap and Stud about 1/2" from the edge and the mating Cap and Socket about 1 1/2" later so that the center of the two KAM Snap parts are about 1 1/2" or more apart.  Any closer and I found I had trouble getting the MAM Ring or O-Ring Adapter to sit neatly inside.   I used Size 20 snaps for this tutorial but either Size 20 or Size 16 will work great.

10.  Repeat on the other side, that will hold the Pacifier Clip.  I, then, feed the Pacifier Clip and MAM Ring Adapter onto the ribbon and snapped it into place.  It may have been easier to thread on the pacifier clip before installing any Snap parts but I was able to feed it through without much trouble.

11.  Tada!  Now time to add the Pacifier.

12.  Simply stretch the MAM Ring or O-Ring around the Button Style Grip on the Pacifier and it will settle behind it and hold the Pacifier securely. Now snap the Pacifier in place, attach to your child's shirt and go.

13.  As pictured, the MAM Rings hold the same way as the O-Rings only with a less subtle profile.

14.  Tada!  Happy Snapping!!!

O-Rings - Button Style Pacifier Adapters in 14 colors!!! August 15 2014

Have you noticed!?! We now carry O-Rings - Button Style Pacifier Adapters in 14 colors!!! Color makes me so happy !

O-Rings are great for attaching your pacifier holders to MAM, Gerber Nuk, Razbaby, and most other button style pacifiers. These rings are made of food grade silicone and are BPA free.

We now carry:

Clear
White
Violet
Dark Lavender
Light Navy
Pastel Blue
Turquoise
Apple Green
Lemon Lime
Orange
Red
Magenta
Rosie Pink
Light Pink

If you haven't had a chance to check them out.