Happy Valentine's Day Weekend from ILikeBigButtons.com February 12 2021

Happy Valentine's Day Weekend!!! What goes better with this weekend of LOVE than Hearts ❤️ and Teddy 🐻 Bears!!!

Our Heart and Teddy Bear Pacifier Clips are 25% OFF through Valentine's Day!!!

Time to Stock Up!

*No Coupon Necessary. Valid Through Valentine's Day (2/14/2019) at ILikeBigButtons.com

Valentine's Day Fabric Cover Button Barrettes @ ILikeBigButtons.com February 11 2021

How to Make Valentine's Day Cover Button Snap Barrettes:

Supplies:

• 1-2 Completed Flat Back Fabric Cover Button (Choose your size, Size 20 through Size 36 all work great, size depends on the statement you want to make)
• 2 Snap Barrettes
• E6000 or comparable adhesive

Steps:

1. Follow these instructions to make Flat Back Fabric Covered Buttons.
2. Lightly scuff the back of the Cover Button so the glue will adhere better (not essential but recommended).
3. Clean both surfaces of dust.
4. Apply E6000 to back of Cover Button.
5. Press Snap Barrette into place and remove any extra Adhesive. On smaller sized Cover buttons center on the glue pad, as they increase in size adjust glue pad accordingly.
6. Let dry and enjoy.
7. Tada!

You are done!  Wear these adorable Snap Barrettes to match or accent your favorite outfit for Valentine's Day or dress up your favorite t-shirt and jeans for an afternoon outing. Enjoy!

Valentine's Cover Button Jumbo Paper Clip Bookmarks @ ILikeBigButtons.com February 10 2021

Valentine's Day Fabric Cover Button Jumbo Paper Clip Bookmarks:

Supplies:

• 1 Completed Flat Back Fabric Cover Button (Attach size 36 (7/8" - 23 mm), size 45 (1 1/8" - 28 mm), or size 60 (1 1/2" - 38 mm) flat back cover buttons.)
• 1 Jumbo Paper Clip
• 1 6" Piece of Ribbon
• E6000 or comparable adhesive
• Sand Paper

Steps:

1. Follow these instructions to make Flat Back Fabric Covered Buttons.
2. Lightly scuff the top of the Paper Clip so the glue will adhere better (not essential but recommended).
3. Lightly scuff the back of the Cover Button so the glue will adhere better (not essential but recommended).
4. Clean both surfaces of dust.
5. Apply E6000 to the back of the Cover Button.
6. Press into place over the glue pad on the Paper clip at the desired height and remove any extra Adhesive.  The bigger the Cover Button the higher you will want to center the cover button.
7. Cut a 6" piece of Ribbon and knot it on the side of the Paper Clip.  Slide it up against the Cover Button.  Straighten and cut ends at an angle at the desired length.
8. Let dry and enjoy.
9. Tada!

You are done! Use these adorable Paper Clips to accent a Valentine for your special loved one or hold your place in your favorite book or cookbook.  Enjoy!

♥♥♥ I Like Big Buttons! Be My Valentine Sale ♥♥♥ February 14 2020

💕 Valentine’s Day Week Celebration Giveaway 💕@ I Like Big Buttons! February 10 2020

To celebrate Valentine’s Day week, we will be giving away a 'craft kit' prize every day this 💕 week in our I Like Big Buttons Group!

Each kit will include one or more of our I Like Big Buttons! craft supplies and links to our online tutorials. (Fabric, glue, etc will not be included).

The winner must like and comment with an answer to the day's post/image in I Like Big Buttons Group.

Giveaway will start at 12 pm PT today (Monday, February 10th)!!!

Daily Prizes:

Monday's prize: 💜 Self-Cover Button Barrettes (25 Size 30 Cover Buttons, Tool/Template, and (25) Random Mix of Barrettes)

Tuesday's prize: 💙 210 Long Prong KAM Snap Starter Pack in Rainbow Spectrum and K2 Plastic Snap Pliers (One 10 pack of each color)

Wednesday's prize: 💚 Self-Cover Button Jumbo Paper Clips (12 Size 45 Cover Buttons, Tool/Template, and (12) Random Mix of Paper Clips)

Thursday's prize: 💛 15 Random Mix of 1" (25 mm) Key Fob Hardware and Key Fob Hardware Pliers

Friday's prize: 🧡 Enameled Pacifier Clips (10 Enameled Clips, 20 Sets of White KAM Snaps, K2 Plastic Snap Pliers, and Random Mix of MAM Rings)

Saturday/Sunday prize: ❤️ ILikeBigButtons.com ($15 Coupon Code good for a one time purchase on ILikeBigButtons.com)

*One (1) Random winner will be drawn every day at 12 pm PT.

"No Sew" Valentine's Day Craft Ideas from ILikeBigButtons.com February 13 2019

I can't believe Valentine's Day snuck up on us so fast, let's look at some fun and easy "No Sew" Cover Button crafts we can make for those we love!

Don't forget our DIY Kits are on sale on our website through 2/15/19, no coupon necessary.

Valentine's Day Fabric Cover Button Barrettes

Wear these adorable Snap Barrettes to match or accent your favorite outfit for Valentine's Day or dress up your favorite t-shirt and jeans for an afternoon outing. Enjoy!

Supplies:

• 1-2 Completed Flat Back Fabric Cover Button (Choose your size, Size 20 through Size 36 all work great, size depends on the statement you want to make)
• 2 Snap Barrettes
• E6000 or comparable adhesive ... See More

Valentine's Day Fabric Cover Button Jumbo Paper Clip Bookmarks

Use these adorable Paper Clip Bookmarks to accent a Valentine for your special loved one or hold your place in your favorite book or cookbook  Enjoy!

Supplies:

• 1 Completed Flat Back Fabric Cover Button (Attach size 36 (7/8" - 23 mm), size 45 (1 1/8" - 28 mm), or size 60 (1 1/2" - 38 mm) flat back cover buttons.)
• 1 Jumbo Paper Clip
• 1 6" Piece of Ribbon
• E6000 or comparable adhesive
• Sand Paper ... See More

Valentine's Day Fabric Cover Button Badge Reels

Use these adorable Valentine's Day Badge Reels to hold your ID for work, school, or play.  Enjoy!

Supplies:

• 1 Completed Flat Back Fabric Cover Button (Size 45 sits on top of Badge Reel, Size 60 rest over Badge Reel)
• 1 Badge Reel
• E6000 or comparable adhesive
• Sand Paper ... See More

Lace & Fabric Cover Button Earrings

Give these cute Lace & Fabric Cover Button Earrings as Valentine gift for your best friend or loved ones.  Enjoy!

Supplies:

• Flat Back Cover Buttons (I used Size 24, Size 30, and Size 36 Cover Buttons)
• Cover Button Assembly Tools
• Cover Button Templates
• Fabric Scraps
• Lace Scraps
• E6000 Adhesive or Hot Glue
• Sharpie Permanent Marker
• Surgical Stainless Steel Earring Posts and Backs ... See More

Fabric Cover Button Bracelet Tutorial

Give this charming Cover Button Bracelet as Valentine gift for your best friend or loved ones.  Enjoy!

Supplies:

• 11 to 13 - Completed Size 20 Flat Back Fabric Cover Buttons
• 1 Disk and Loop Bracelet (We have two sizes available 7.2" or 8.25")
• 11 to 13 - 1/2" x 1/2" Felt squares
• E6000 or comparable adhesive ... See More

Cover Button Bobby Pins

Give these adorable Cover Button Bobby Pins as Valentine gifts for your best friend or loved ones.  Enjoy!

Supplies:

• 1 Completed Flat Back Fabric Cover Button (Choose your size, Size 20 through Size 45 all work great, size depends on the statement you want to make)
• 1 Bobby Pin
• E6000 or comparable adhesive ... See More

I Like Big Buttons! "No Sew" Valentine's Day Craft Ideas February 03 2017

As we approach Valentine's Day, lets look at some fun and easy "No Sew" Cover Button crafts we can make for those we love!

Take 10% Off on any Cover Button order on our website through 1/10/17 with Coupon Code: NOSEWVALENTINE

Valentine's Day Fabric Cover Button Barrettes

Wear these adorable Snap Barrettes to match or accent your favorite outfit for Valentine's Day or dress up your favorite t-shirt and jeans for an afternoon outing. Enjoy!

Supplies:

• 1-2 Completed Flat Back Fabric Cover Button (Choose your size, Size 20 through Size 36 all work great, size depends on the statement you want to make)
• 2 Snap Barrettes
• E6000 or comparable adhesive ... See More

Valentine's Day Fabric Cover Button Jumbo Paper Clip Bookmarks

Use these adorable Paper Clip Bookmarks to accent a Valentine for your special loved one or hold your place in your favorite book or cook book.  Enjoy!

Supplies:

• 1 Completed Flat Back Fabric Cover Button (Attach size 36 (7/8" - 23 mm), size 45 (1 1/8" - 28 mm), or size 60 (1 1/2" - 38 mm) flat back cover buttons.)
• 1 Jumbo Paper Clip
• 1 6" Piece of Ribbon
• E6000 or comparable adhesive
• Sand Paper ... See More

Valentine's Day Fabric Cover Button Badge Reels

Use these adorable Valentine's Day Badge Reels to hold your ID for work, school, or play.  Enjoy!

Supplies:

• 1 Completed Flat Back Fabric Cover Button (Size 45 sits on top of Badge Reel, Size 60 rest over Badge Reel)
• 1 Badge Reel
• E6000 or comparable adhesive
• Sand Paper ... See More

Lace & Fabric Cover Button Earrings

Give these cute Lace & Fabric Cover Button Earrings as Valentine gift for your best friend or loved ones.  Enjoy!

Supplies:

• Flat Back Cover Buttons (I used Size 24, Size 30, and Size 36 Cover Buttons)
• Cover Button Assembly Tools
• Cover Button Templates
• Fabric Scraps
• Lace Scraps
• E6000 Adhesive or Hot Glue
• Sharpie Permanent Marker
• Surgical Stainless Steel Earring Posts and Backs ... See More

Fabric Cover Button Bracelet Tutorial

Give this charming Cover Button Bracelet as Valentine gift for your best friend or loved ones.  Enjoy!

Supplies:

• 11 to 13 - Completed Size 20 Flat Back Fabric Cover Buttons
• 1 Disk and Loop Bracelet (We have two sizes available 7.2" or 8.25")
• 11 to 13 - 1/2" x 1/2" Felt squares
• E6000 or comparable adhesive ... See More

Cover Button Bobby Pins

Give these adorable Cover Button Bobby Pins as Valentine gifts for your best friend or loved ones.  Enjoy!

Supplies:

• 1 Completed Flat Back Fabric Cover Button (Choose your size, Size 20 through Size 45 all work great, size depends on the statement you want to make)
• 1 Bobby Pin
• E6000 or comparable adhesive ... See More

Happy Valentine's Day!!! February 14 2016

#‎ilikebigbuttons‬ ‪#‎kamsnaps‬ ‪#‎sale‬ ‪#‎craftsupplies

Valentine's Day Fabric Cover Button Badge Reels February 04 2016

Use these adorable Valentine's Day Badge Reels to hold your ID for work, school, or play.  Enjoy!

Supplies:

• 1 Completed Flat Back Fabric Cover Button (Size 45 sits on top of Badge Reel, Size 60 rest over Badge Reel)
• 1 Badge Reel
• E6000 or comparable adhesive
• Sand Paper

Steps:

1.  Follow these instructions to make Flat Back Fabric Covered Buttons.

2. Lightly scuff the top of the Badge Reel so glue will adhere better (not essential but recommended).

3.  Lightly scuff the back of the Cover Button so glue will adhere better (not essential but recommended).

4.  Clean both surfaces of dust.

5.  Apply E6000 to back of Cover Button or Badge Reel.

6.  Press into place over the face of the Badge Reel and remove any extra Adhesive.

7.  Let dry and enjoy.

8.  Tada!

View Full Tutorial, plus many other great Fabric Cover Button ideas here.

Valentine's Day Fabric Cover Button Barrettes January 27 2016

Wear these adorable Snap Barrettes to match or accent your favorite outfit for Valentine's Day or dress up your favorite t-shirt and jeans for an afternoon outing. Enjoy!

Supplies:

• 1-2 Completed Flat Back Fabric Cover Button (Choose your size, Size 20 through Size 36 all work great, size depends on the statement you want to make)
• 2 Snap Barrettes
• E6000 or comparable adhesive

Steps:

1.  Follow these instructions to make Flat Back Fabric Covered Buttons.

2.  Lightly scuff the back of the Cover Button so the glue will adhere better (not essential but recommended).

3.  Clean both surfaces of dust.

4.  Apply E6000 to back of Cover Button.

5.  Press Snap Barrette into place and remove any extra Adhesive. On smaller sized Cover buttons center on the glue pad, as they increase in size adjust glue pad accordingly.

6.  Let dry and enjoy.

7.  Tada!

View Full Tutorial, plus many other great Fabric Cover Button ideas here.

Valentine's Day Fabric Cover Button Jumbo Paper Clip Bookmarks January 19 2016

Use these adorable Paper Clip Bookmarks to accent a Valentine for your special loved one or hold your place in your favorite book or cookbook.  Enjoy!

Supplies:

• 1 Completed Flat Back Fabric Cover Button (Attach size 36 (7/8" - 23 mm), size 45 (1 1/8" - 28 mm), or size 60 (1 1/2" - 38 mm) flat back cover buttons.)
• 1 Jumbo Paper Clip
• 1 6" Piece of Ribbon
• E6000 or comparable adhesive
• Sand Paper

Steps:

1.  Follow these instructions to make Flat Back Fabric Covered Buttons.

2.  Lightly scuff the top of the Paper Clip so the glue will adhere better (not essential but recommended).

3.  Lightly scuff the back of the Cover Button so the glue will adhere better (not essential but recommended).

4.  Clean both surfaces of dust.

5.  Apply E6000 to the back of the Cover Button.

6.  Press into place over the glue pad on the Paper Clip at the desired height and remove any extra Adhesive.  The bigger the Cover Button the higher you will want to center the cover button.

7.  Cut a 6" piece of Ribbon and knot it on the side of the Paper Clip.  Slide it up against the Cover Button.  Straighten and cut ends at an angle at the desired length.

8.  Let dry and enjoy.

9.  Tada!

View Full Tutorial, plus many other great Fabric Cover Button ideas here.