I Like Big Buttons! 🌈 Rainbow Combo Sale 🌈 March 01 2021

Rainbow Combo Packs are 20% OFF

No Coupon Necessary

Making A Fabric Cover Button Full-Size Clothespin @ ILikeBigButtons.com February 23 2021

How to Make Cover Button Bobby Full-Size Clothespins:

Supplies:

• 1 Completed Flat Back Fabric Cover Button (Attach Size 30 (3/4 inch / 19 mm), Size 36 (7/8 inch / 23 mm), or Size 45 (1 1/8 inch / 28 mm) flat back cover buttons.)
• 1x Full-Size Wooden Clothespin
• 1x Medium Plain Button
• E6000, Hot Glue, or comparable adhesive

Instructions:

1. Cut your fabric scrap. You will want a circle that is about twice the diameter of your button blank.
2. Put your fabric piece in the larger assembly tool piece (RIGHT SIDE DOWN). When you look into the tool you want to see the back of the fabric.
3. Place the button front (the domed piece) on top of the fabric. Leave the fabric edges hanging out.
4. Press the cover button edges down into the tool. *TIP* To make it easier on my fingers, I use a sharpie marker to apply pressure.
5. Place the back cover button piece on top of your fabric and button front. *TIP* If the cover button will be subject to repeated tugging from the back, you may want to add a little e6000 adhesive before attaching the back.
6. Take the smaller piece of the assembly tool and with the open side down place it on the button back.
7. Press down. You may hear a pop when the last bit of the button back slips into place. If you take the tool out and the button is not completely secured, just put it back in and press down again. *TIP* I often use a flat piece of wood to apply pressure, again to save my fingers. It also helps to avoid the button back going in at an angle.
8. When you take the small assembly tool piece off, the fabric edges will be secured underneath the button back.
9. Remove the button from the larger assembly tool piece.
10. Tada! Now to attach it to the Clothespin.
11. Use Hot Glue or E6000 to adhere a small plain button to the underside of the Cover Button. This is to fill the space between the back and the edges. You can also use felt or some other small object. You just need it to be sturdy enough to offer support. A small plastic button works great for this. You will see that the button is now flush across the bottom. I cut off the little nubs of glue that leaked through the button holes.
12. Now adhere the finished Cover Button to the Clothespin. Press into place and center it until you are pleased with the alignment. Set aside to dry.
13. Tada! Additional uses:

• Add a thin magnet to the back and use on your magnetic board.
• Add a push pin to the back and use on your cork board.

How To Make A Fabric Cover Button Mini Clothespin

To see other great Fabric Cover Button ideas, visit our DIY Project section here.

Making Fabric Cover Button Bobby Pins @ ILikeBigButtons.com February 19 2021

How to Make Cover Button Bobby Pins:

Supplies:

• 1 Completed Flat Back Fabric Cover Button (Choose your size, Size 20 through Size 45 all work great, size depends on the statement you want to make)
• 1 Bobby Pin
• E6000 or comparable adhesive

Steps:

1. Follow these instructions to make Flat Back Fabric Covered Buttons.
2. Apply E6000 to back of Cover Button.
3. Press Bobby Pin into place and remove any extra Adhesive. On smaller sized Cover buttons center the glue pad, as they increase in size adjust accordingly.
4. Let dry and enjoy.
5. Tada!

You are done! Wear these adorable Bobby Pins to match or accent your favorite outfit or dress up your favorite t-shirt and jeans for an afternoon outing. Enjoy!

Making Fabric Cover Button Earrings @ ILikeBigButtons.com February 16 2021

How to Make Cover Button Earrings:

Supplies:

• 2 Completed Flat Back Fabric Cover Button (Choose your size, Size 20 through Size 60 all work great, size depends on the statement you want to make)
• 1 set of Earring Post & Backs
• E6000 or comparable adhesive

Steps:

1. Follow these instructions to make Flat Back Fabric Covered Buttons.
2. Apply E6000 to the back of the Cover Button.
3. Press Earring Post into place and remove any extra Adhesive.  On smaller sized Cover buttons center the post, as they increase in size adjust the post towards the top.
4. Let dry, add Earring Backing/Nut, and enjoy.
5. Tada!

You are done! Wear these adorable Earrings to match or accent your favorite outfit or dress up your favorite t-shirt and jeans for an afternoon outing. Enjoy!

Happy Valentine's Day Weekend from ILikeBigButtons.com February 12 2021

Happy Valentine's Day Weekend!!! What goes better with this weekend of LOVE than Hearts ❤️ and Teddy 🐻 Bears!!!

Our Heart and Teddy Bear Pacifier Clips are 25% OFF through Valentine's Day!!!

Time to Stock Up!

*No Coupon Necessary. Valid Through Valentine's Day (2/14/2019) at ILikeBigButtons.com

Valentine's Day Fabric Cover Button Barrettes @ ILikeBigButtons.com February 11 2021

How to Make Valentine's Day Cover Button Snap Barrettes:

Supplies:

• 1-2 Completed Flat Back Fabric Cover Button (Choose your size, Size 20 through Size 36 all work great, size depends on the statement you want to make)
• 2 Snap Barrettes
• E6000 or comparable adhesive

Steps:

1. Follow these instructions to make Flat Back Fabric Covered Buttons.
2. Lightly scuff the back of the Cover Button so the glue will adhere better (not essential but recommended).
3. Clean both surfaces of dust.
4. Apply E6000 to back of Cover Button.
5. Press Snap Barrette into place and remove any extra Adhesive. On smaller sized Cover buttons center on the glue pad, as they increase in size adjust glue pad accordingly.
6. Let dry and enjoy.
7. Tada!

You are done!  Wear these adorable Snap Barrettes to match or accent your favorite outfit for Valentine's Day or dress up your favorite t-shirt and jeans for an afternoon outing. Enjoy!

Valentine's Cover Button Jumbo Paper Clip Bookmarks @ ILikeBigButtons.com February 10 2021

Valentine's Day Fabric Cover Button Jumbo Paper Clip Bookmarks:

Supplies:

• 1 Completed Flat Back Fabric Cover Button (Attach size 36 (7/8" - 23 mm), size 45 (1 1/8" - 28 mm), or size 60 (1 1/2" - 38 mm) flat back cover buttons.)
• 1 Jumbo Paper Clip
• 1 6" Piece of Ribbon
• E6000 or comparable adhesive
• Sand Paper

Steps:

1. Follow these instructions to make Flat Back Fabric Covered Buttons.
2. Lightly scuff the top of the Paper Clip so the glue will adhere better (not essential but recommended).
3. Lightly scuff the back of the Cover Button so the glue will adhere better (not essential but recommended).
4. Clean both surfaces of dust.
5. Apply E6000 to the back of the Cover Button.
6. Press into place over the glue pad on the Paper clip at the desired height and remove any extra Adhesive.  The bigger the Cover Button the higher you will want to center the cover button.
7. Cut a 6" piece of Ribbon and knot it on the side of the Paper Clip.  Slide it up against the Cover Button.  Straighten and cut ends at an angle at the desired length.
8. Let dry and enjoy.
9. Tada!

You are done! Use these adorable Paper Clips to accent a Valentine for your special loved one or hold your place in your favorite book or cookbook.  Enjoy!

Making Magnetic Pin Cushion/Needle Holder @ ILikeBigButtons.com February 08 2021

Supplies:

• 1 Completed Size 75 (1 7/8 inch / 48 mm) Fabric Cover Button
• Fabric Of Your Choice
• 1x Standard Round Magnet (Approximately 3/4" Round)
• E6000, Hot Glue, or comparable adhesive

I Like Big Buttons! - Picture Tutorial Below:

1.  Cut your fabric scrap. You will want a circle that is about twice the diameter of your button blank. *TIP* Our All-In-One Cover Button Template makes creating the right size circle of fabric a breeze.

2.  Put your fabric piece in the larger assembly tool piece (RIGHT SIDE DOWN). When you look into the tool you want to see the back of the fabric.

3. Glue the magnet inside the back of the Cover Button with Hot Glue or E6000.

4.  Place the button front (the domed piece) on top of the fabric. Leave the fabric edges hanging out.

5.  Press the cover button edges down into the tool. *TIP* To make it easier on my fingers, I use a sharpie marker to apply pressure.

6.  Place the back cover button piece on top of your fabric and button front. *TIP* If the cover button will be subject to repeated tugging from the back, you may want to add a little e6000 adhesive before attaching the back.

7.  Take the smaller piece of the assembly tool and with the open side down place it on the button back.

8.  Press down. You may hear a pop when the last bit of the button back slips into place. If you take the tool out and the button is not completely secured, just put it back in and press down again. *TIP* I often use a flat piece of wood to apply pressure, again to save my fingers. It also helps to avoid the button back going in at an angle.

9.  When you take the small assembly tool piece off, the fabric edges will be secured underneath the button back.

9.  Remove the button from the larger assembly tool piece.

10.  Tada! Now you have an attractive Pin Cushion/Needle Holder for your sewing room.

To see other great Fabric Cover Button ideas, visit our DIY Project section here.

Brand New!!! Jumbo Sewing Clips by I Like Big Buttons! February 03 2021

Where to Buy 

I Like Big Buttons! 💘 Cover Button Love Sale 💘 February 01 2021

Cover Button Sets and Cover Button DIY Kits are 10% OFF

No Coupon Necessary

Time to Stock Up!

1 Coupon Per Order. Good Through February 28, 2021.

Free Stay Dry Drooler Bib Pattern January 27 2021

Robin H. shared this free pattern/tutorial a while back. It is still a great one, especially for those drooly babies in your life.

"I got a starter set of Kam Snaps and Hand and Pliers to use for the bib closure. This not only solved my velcro nightmares, it also made the bibs more difficult for my little guy to pull off."

See other great KAM Plastic Snap Tutorial and Ideas on our website.

Shop KAM Plastic Snaps @ ILikeBigButtons.com

Monday Humor @ ILikeBigButtons.com January 25 2021

Welcome to crazy Monday!!! 🤪🙃😉

Monday Humor @ ILikeBigButtons.com January 18 2021

Yes!!!

Our Turquoise (G115) KAM Plastic Snap is one of our most popular vibrant blues. It works great for both girls and boys alike and is a great all-around color. If you are not into Turquoise, we carry 22 other shades of blue and 130+ unique colors of snaps.

   

The Anatomy Of A KAM Plastic Snap @ ILikeBigButtons.com January 07 2021

KAM plastic snaps are wonderful. They are a SNAP to install and much easier and durable than a standard metal snap or sewable button.  They come in a multitude of colors and sizes.  Which one is right for you?

Here is a simple tutorial on the anatomy of a plastic snap set. There are 4 parts to a set:

• 2 Caps (Before installation they resemble a tack with a Round, Heart, or Star shaped head. They give a neat finished look to your snap.)
• 1 Socket (The female part with the larger raised circle that the stud (male part) fits into)
• 1 Stud (The male part with the smaller raised circle that fits inside the socket (female part))

SIZE 20:

• Size 20 (0.5" - 12.4 mm) snaps can be used for most general projects like baby diapers and clothing. They are our most popular plastic snap size, have the largest color variety, and have a good strong hold. We carry them in all 130 colors and clear.
• Standard Size 20 snaps have a 5.6mm prong length. Prong length refers to the length of the shaft on the backside of the Cap. When formed, the prong will compress and form a 'mushroom' shape to hold the Cap and Socket or Stud together.
• We also offer Long Prong Size 20 (0.5" - 12.4 mm) in a rainbow of colors. They are great for embroidered key fobs using Marine or Glitter Vinyl as well as other projects where you need just a little more prong length. Long Prong Size 20 snaps have a 6.2mm prong length.

 SIZE 16:

• Size 16 (0.4" - 10.2 mm) snaps are most commonly used for baby and toddler clothing, pacifier clips, mama pads, and small crafts. We carry them in our first 60 ("B") colors and clear.
• Size 16 snaps have a 4.2mm prong length. Prong length refers to the length of the shaft on the backside of the Cap. When formed, the prong will compress and form a 'mushroom' shape to hold the Cap and Socket or Stud together.
• The Size 16 Socket and Stud are less noticeably different. Many first time users don't immediately see the distinction. The Socket's raised circle is the larger of the two pictured, and the Stud's raised circle is smaller and inserts into the Socket (female) side.

SIZE 14:

• Our Size 14 (0.35" - 9.7 mm) snaps can be used in most applications where Size 16 snaps are used. We carry them in White and Black at this time.
• Our Size 14 snaps have a 5.0mm prong length. Prong length refers to the length of the shaft on the backside of the Cap. When formed, the prong will compress and form a 'mushroom' shape to hold the Cap and Socket or Stud together.
• As with the Size 16, the Size 14 Socket and Stud are less noticeably different. The Socket's circle is the larger of the two pictured.  The Stud's circle is smaller and inserts into the Socket (female) side. Size 16 and Size 14 Sockets and Studs are the same; only the cap differs.

SIZE 19:

• Size 19 (0.475" - 12 mm) snaps are used for heavy-duty applications requiring a strong grip. They are often used with tote bags, coats, tarps, and upholstery. We carry them in White and Black at this time.
• Size 19 snaps have a 6.9mm prong length. Prong length refers to the length of the shaft on the backside of the Cap. When formed, the prong will compress and form a 'mushroom' shape to hold the Cap and Socket or Stud together.
• The Size 19 Socket and Studs are larger, but similar in appearance to Size 20 Sockets and Studs.

SIZE 22:

• Size 22 (0.55" - 14.1 mm) snaps are used for heavy-duty applications requiring a strong grip. They are often used with tote bags, coats, tarps, and upholstery. We carry them in White and Black at this time.
• Size 22 snaps have a 6.9mm prong length. Prong length refers to the length of the shaft on the backside of the Cap. When formed, the prong will compress and form a 'mushroom' shape to hold the Cap and Socket or Stud together.
• The Size 22 Socket and Studs are larger, but similar in appearance to Size 20 Sockets and Studs.

Wednesday Humor @ ILikeBigButtons.com January 06 2021

Just for today! 😜

Our Dazzle (G95) KAM Plastic Snaps reminds me of grape popsicles, mermaids 🧜‍♀️, and childhood imagination.

If you are not into Dazzle, we carry 16 other shades of purple and 130+ unique colors of snaps.

💖 KAM Plastic Snaps Love Sale 💖 January 03 2021

Rounds, ❤️Hearts❤️, ⭐Stars⭐, and Long Prongs, Oh My!!! All our KAM Plastic Snaps are 15% OFF in our Quick Order Chart using coupon code: KAMSNAPLOVE

Time to Stock up!!!

🥳 END OF THE YEAR SALE! 🥳 @ ILikeBigButtons.com December 28 2020

What an unexpected year of up and downs! 😭🙃🤪 As a THANK YOU for sticking with us through 2020, take 15% off your End of the Year order using coupon code:

SURVIVED2020

Valid on www.ILikeBigButtons.com only.
1 Coupon Per Order. Good Through January 2, 2021.

Merry Christmas! Professional KAM Plastic Snap Press and KAM Plastic Snaps GIVEAWAY! @ ILikeBigButtons.com December 02 2020

I Like Big Buttons! 🧵✂️ DIY Kit Sale 🧵✂️ December 01 2020

I Like Big Buttons! 🧵✂️ DIY Kit Sale 🧵✂️

DIY Kits are 10% OFF | No Coupon Necessary

We have had a lot of requests for DIY Starter Kits over the years for our most popular supplies. We have compiled our customers' favorite craft findings and supplies into these great Starter Kits that make perfect gifts or gift DIY kits for this time of year.

Time to stock up!

Good Through December 31, 2020.

FLASH SALE! Take 10% Off Bobby Pin and Barrette Supplies @ ILikeBigButtons.com November 18 2020

FLASH SALE! TAKE 10% OFF BOBBY PIN AND BARRETTE SUPPLIES

Today only! Take 10% off all our Bobby Pin and Barrette Supplies using coupon code: HAIRPINS10

Bobby Pin Sale Link

Barrette Sale Link 

I Like Big Buttons! 👶 Pacifier Supply Sale 👶 November 01 2020

Pacifier Supplies & Pacifier Adapters

are 10% OFF

No Coupon Necessary

Time to Stock Up!


Good Through November 30, 2020.

Ribbon and Cotton Webbing Key Fob Tutorial October 05 2020

How to make a Ribbon Key Fob Wristlet:

You will need:

• Scissors
• Sewing Machine
• Iron

Supplies:

• 1.25" Cotton Webbing
• Ribbon (Narrower than the Cotton Webbing)
• Coordinating color thread
• Heat N Bond or Fusible Tape
• 1.25" (32 mm) Key Fob Hardware
• Key Fob Hardware Pliers

Instructions (adjust accordingly for 1" hardware):

1. Cut a 10" section of the Cotton Webbing and Ribbon of your choosing.
2. Cut a 10" section of Heat N Bond, keeping it thinner than your ribbon.
3. Iron the Heat N Bond to your Cotton Webbing, making sure to center it. This is not a necessary step but it makes it easier to sew the Ribbon on especially with embroidered ribbon.
4. Iron the Ribbon to the Cotton Webbing.
5. Sew up one side of the Ribbon and down the other. The Ribbon should now be securely attached to the Cotton Webbing.
6. Trim the edges so they are even.
7. Fold the Cotton Webbing in half, right sides facing out and match up the ends.
8. Stitch the ends together with a 1/4" seam allowance.
9. Trim any loose threads.
10. Tuck the sewn seam ends into the Key Fob Hardware, making sure that the Cotton Webbing is centered.
11. Using your Key Fob Hardware Pliers with silicone tips to protect the metal from getting scratched, squeeze the Key Fob Hardware closed a little at a time. I like to go back and forth a couple times so that I don't over crimp one side.
12. Add the Key Ring and Yay!!! You are done. Good Job!!!

I Like Big Buttons! 🔑 Key Fob Hardware Sale 🔑 October 01 2020

Labor Day Sale!!! Take An Additional 15% Off Clearance Items September 04 2020

Happy Labor Day Weekend!!!

In honor of the last great Summer Weekend, today, September 4th, through Monday, September 7th, take an additional 15% off all our Clearance Craft Supplies using coupon code: CLEARANCE15

Clearance and Sale Link

15% OFF MEGA Starter Packs in Size 20 and Size 16 @ I Like Big Buttons! August 25 2020

We are running a sale on our MEGA Starter Packs in Size 20 and Size 16. No coupon necessary.

You can choose from our Mega Starter Packs in Size 20 or Size 16 with either 10 or 25 sets of each color.

Size 20 Mega Starter Pack A:
Our first 60 KAM Snap Colors (B1 through B60) plus Clear in Size 20.

OR

Size 20 Mega Starter Pack B:
All 70 of our custom KAM Snap Colors (G61-G130) in Size 20

• Size 20 snaps are our most popular size and can be used for most general projects like baby diapers and clothing. Size 20 snaps have the largest color variety, have a good strong hold, and are a good size for most projects.
• Each set includes 2 round caps, 1 socket and 1 stud.

OR

Size 16 Mega Starter Pack A:
All 60 KAM Snap Colors (B1 through B60) in Size 16

• Size 16 (0.4" - 10.2 mm) snaps are most commonly used for baby and toddler clothing, pacifier clips, mama pads, and small crafts.
• Each set includes 2 round caps, 1 socket and 1 stud.

🎆 Happy Fourth of July! 🎆 Sale at ILikeBigButtons.com July 03 2020

Before we prepare to celebrate another great 4th with our Little Buttons, I wanted to give all of you our Celebration Deals so you can get some great summer crafts.

Coupon Codes ( Good through Monday 7/6/20 on @ I Like Big Buttons! ):

FOURTH5 for 5% off of orders over $25

FOURTH10 for 10% off of orders over $100

FOURTH15 for 15% off of orders over $200

***BONUS: Don't forget that US orders over $99 also get upgraded to free shipping!!!

Happy Fourth of July from our family to yours!!! Have a great snappy holiday week!!!

I Like Big Buttons! and All Buttons BIG and small 🎆🎆🎆

I Like Big Buttons! 🌈 Rainbow Combo Sale 🌈 March 01 2020

Rainbow Combo Packs are 20% OFF

No Coupon Necessary

I Like Big Buttons! 💘 Cover Button Love Sale 💘 February 03 2020

Cover Button Sets and Cover Button DIY Kits are 10% OFF

No Coupon Necessary

💖 KAM Plastic Snaps Love Sale 💖 January 01 2020

Rounds, ❤️Hearts❤️, ⭐Stars⭐, and Long Prongs, Oh My!!! All our KAM Plastic Snaps are 15% OFF in our Quick Order Chart using coupon code: KAMSNAPLOVE

Merry Christmas! Professional KAM Plastic Snap Press GIVEAWAY! @ ILikeBigButtons.com December 08 2019

Only 17 More Days Until Christmas!!! How did that happen?!? We are sponsoring a Coral Pink DK-93 Professional Snap Press Giveaway!!! What better way to celebrate the gift-giving season!!! You will receive one of our custom Coral Pink DK-93 Press (as pictured) with a set of Size 20 Dies (will have all the parts to function, no additional expense will be required).

Giveaway good until Monday 12/16/19

See how to ENTER TO WIN below (Giveaway Rules*):

1. LIKE & SHARE this I Like Big Buttons! Facebook Giveaway Post publicly.

2. COMMENT on this I Like Big Buttons! Facebook Giveaway Post and share with us your favorite Christmas treat. - Our favorite here at I Like Big Buttons! is a toss-up between Muddy Buddy and Hot Cocoa with Candy Canes and LOTS of Whipped Cream. :)

3. Make sure you are a MEMBER of our I Like Big Buttons! Fan Group and LIKE the Professional Press Giveaway Post in the Fan Group (Post will be pinned in Announcements).

*If your name is drawn as the winner, we will check to make sure you have completed all the requirements above. One (1) Random winner will be drawn.

If you can’t wait and want our Coral Pink or Emerald Press, they are already on SALE our website no coupon needed.

***BONUS, Check out our Christmas Sale and get 10%-30% off your I Like Big Buttons! order (See Sales Details) @ I Like Big Buttons!

🎄 Shop Now!!! 🎄 Storewide 🎄 Christmas Sale @ ILikeBigButtons.com December 05 2019

 

🎄 Shop Now! We have extended our Storewide Sale through the 🎉 New Year 🎉 in a HUGE 🎄 🎄 🎄 Christmas Sale!

 

Coupon Codes (Good through the New Year on our website):

CHRISTMAS10 for 10% off orders $25+

CHRISTMAS15 for 15% off orders $125+

CHRISTMAS20 for 20% off orders $350+

CHRISTMAS30 for 30% off orders $1000+

***BONUS: Don't forget that US orders $99+ also get upgraded to free shipping!!! 

 

We hope you have a wonderful December and a very Merry Christmas!!!

I Like Big Buttons! and All Buttons big and small :)

 

KAM Snaps:

Pacifier Supplies:

Cover Buttons:

Key Fob Hardware:

Lobster Clasps:

Barrettes:

Bobby Pins:

Paper Clips:

Earring Supplies:

Sewing Clips:

And Much More...

 

Shop Now!!! Storewide 2019 Black Friday Sale @ ILikeBigButtons.com November 23 2019

 

Black Friday ... Small Business Saturday ... And Cyber Monday all rolled into one HUGE Storewide Sale!

Before we prepare to celebrate another amazing Thanksgiving with our family, I wanted to give all of you our Black Friday Deals so you can get started with some great Christmas crafts or for you pre-planners ;) some last-minute projects.

Coupon Codes (Good through December 12/5/19 on our website):

THANKFUL10 for 10% off orders $25+

THANKFUL15 for 15% off orders $125+

THANKFUL20 for 20% off orders $350+

THANKFUL30 for 30% off orders $1000+

***BONUS: Don't forget that US orders $99+ also get upgraded to free shipping!!!

Black Friday orders made Thanksgiving Day through December 1st (Sunday) will ship out Monday with our morning pickup. Thank you for your understanding and business! Happy Thanksgiving from our family to yours!!! Have a great crafty holiday week!!!

I Like Big Buttons! and All Buttons big and small :)

KAM Snaps:

Pacifier Supplies:

Cover Buttons:

Key Fob Hardware:

Lobster Clasps:

Barrettes:

Bobby Pins:

Paper Clips:

Earring Supplies:

Sewing Clips:

And Much More...

 

Clear MAM Rings/Pacifier Adapters are Back In Stock!!! November 19 2019

To Celebrate --> 

😍 I Like Big Buttons! MAM Rings and O-Rings Sale 😍

15% Off MAM Rings and O-Rings Sale | No Coupon Necessary

😍 I Like Big Buttons! Grommets/Eyelets Sale 😍 November 14 2019

15% Grommets/Eyelets Sale - Good through 11/17 | No Coupon Necessary [...]

Shop Now

See other deals in our Clearance Section on our site:

Rainbow GRAB BAG: Random 1000* Kam Plastic Snaps (Size 20) for $21.95 (Regularly $34.95)

Grab Bag: 1000* Kam Snaps/Plastic Snaps for $18.95 (Regularly $34.95)

Mixed Bag: 100 Kam Snaps/Plastic Snaps Sets (Size 20) for $2.95 (Regularly $3.95)

** Make sure you are a member of our I Like Big Buttons! Facebook Group and don't forget to turn ON your notifications so you don't miss our latest news and deals.

I Like Big Buttons! DIY Projects:

Baby Bibs, Bib Bandanas, Pacifier Clips, Toy Leashes, Unpaper Towels, Key Fob Wristlets, Fabric Cover Button Earrings, and More. Check out our library of craft projects using I Like Big Button! supplies [...]

See more >>

Sale! 50% OFF -- 50 Piece - Sewing Clips/Binding Clips November 08 2019

50% OFF -- 50 Piece - Sewing Clips/Binding Clips

--> $3.49 (Originally $6.95)

⚡️⚡️⚡️ Flash Sale - MINI Grab Bag: 250* KAM Plastic Snaps ⚡️⚡️⚡️ November 03 2019

⚡️ FLASH SALE - Today Only ⚡️

 

MINI Grab Bag: 250* Kam Snaps/Plastic Snaps for $6.95 (Regularly $10.95)

SALE LINK