What are you feeling Thankful, Grateful, and Blessed about today? November 23 2020

Tuesday Humor @ ILikeBigButtons.com November 17 2020

Jean Pacifier Clip with Fabric Rosette November 16 2020

Supplies for a Recycled Jean Pacifier Clip with Fabric Rosette:

• 1 Pair of Holey Jeans
• 1 1/2" to 2" x 24" long strip of Fabric
• 1 KAM Plastic Pacifier Clip
• 1 KAM Snap Sets
• KAM Snap Pliers and Awl
• Sewing Clips
• Standard Sewing Machine
• Hot Glue Gun
• Fabri-Tac - Fabric Adhesive

Instructions:

1. Using an old, holey pair of Jeans cut two 1 1/2" x 14" strips of material.
2. Use Sewing Clips to hold the material, wrong sides together, right sides facing out.
3. Stitch around the strip of fabric about a 1/4 to 3/8" in all the way around making sure to backstitch at the start and end.
4. Pull on the edges to fray the jean material up to the stitch you made.  I used a crafty child :) with a cutting board and a fork.  It will also fray over time but I was going for this look.
5. To make the Fabric Rosette, fold the fabric in half, wrong sides together, two times.  You will end up with about 1/2" or less strip of fabric 24" long.  I used an iron to fold it, not so much that it was completely flat, just enough that it held its shape.  Start at one end and hot glue the first bit of it back against itself.
6. Continue this ever so often so that the 'bud' stays together.
7. Make the bud or center of the rose about 1/2" in diameter.  Add one last drop of hot glue.
8. Now twist the fabric 360 degrees, so that the bottom becomes the top.  Tack it with a small bead of hot glue and repeat.
9. Continue twisting and gluing until you run out of fabric or until you reach the desired size of your rosette.
10. It will look like this when you are finished.
11. Glue the last bit of fabric on the underside of the Rosette securely with hot glue.
12. For a more finished look, I added a circle of felt to the bottom with Fabri-Tac.
13. Put the KAM Plastic Pacifier Clip on the Fabric strip about 1″ in.
14. Fold back 1″ of the strip back onto itself.
15. Straight stitch across the fabric strip just behind the KAM Plastic Pacifier Clip.  Make sure to set the stitch.
16. Make sure that the internal snap in a comfortable distance to accommodate the width of the handle, I spaced my KAM Snaps about 2″ apart using the Pacifier I have with the biggest handle.
17. Now on the side where the Pacifier will be attached, I installed a Cap and Socket about 1/2″ from the edge.  I used Size 20 snaps for this tutorial but either Size 20 or Size 16 will work great.
18. Add Fabric Rosette with Fabri-Tac to the Pacifier Clip just above the clip.
19. Now snap the Pacifier in place, attach to your child’s outfit and go.
20. Tada!  Okay, I think I am in love.  Super cute!  Happy Snapping!!!  To see our other great Pacifier Clip Tutorial and KAM Plastic Snap Ideas and buy these supplies visit I Like Big Buttons.com.

Disclaimer:  Keep in mind that although I have rough tested these I in no way recommend you leave your baby alone with these as there are small pieces and if not done properly they may come apart and become a choking hazard.  I would recommend these clips under adult supervision only.  The maker and/or parent assumes full responsibility when using these pacifier clips.

FLASH SALE! Take An Additional 15% Off Clearance Items @ ILikeBigButtons.com November 11 2020

Today only! Take an additional 

15% off all our Clearance Craft Supplies

using coupon code:

CLEARANCE15

Tuesday Humor @ ILikeBigButtons.com November 10 2020

Especially this time of year!!! 😊😜😁

Our Violet (B41) KAM Plastic Snap is one of our most popular colors and a favorite of mine. If you are not into Violet, we carry 16 other shades of purple and 130+ unique colors of snaps.

"No Sew" Pacifier Clip with KAM Snaps and Enamel Clip by ILikeBigButtons.com November 03 2020

Supplies for a "No Sew" Pacifier Clip:

• Pacifier with Hinged Handle
• 14-15" of 7/8" Grosgrain Ribbon
• 1 Enamel Clip or Plastic Clip
• 2 KAM Snap Sets
• KAM Snap Pliers and Awl
• Fabric Tac
• Lighter or Chef's Torch

Instructions:

1. Choose a 7/8" or 3/4" Grosgrain Ribbon, cut a 14" to 16" length of ribbon.  I did 7/8" Grosgrain Ribbon and I cut it 16" long so when it was completed it was approximately 12" long.
2. The ribbon I was using was made of polyester so I used a lighter to seal the ends of the ribbon so it doesn't fray.  (If you are unsure, you may want to practice on a scrap piece if this is your first time or you are unsure of what the material is made of.)
3. Then I used a bit of Fabric Tac and folded over 1" of the ribbon back on itself to reinforce the ribbon and pressed it firmly and let it dry.  Repeat on the opposite end.
4. Once dry, I installed a Cap and Socket in each end of the ribbon about 1/2" from the edge.  I used Size 20 snaps for this tutorial but either Size 20 or Size 16 will work great.
5. On the side that will hold the Enamel Clip, I simply folded the ribbon over at the 1" mark and installed a Cap and Stud where it would meet.  I, then, feed the Enamel Clip onto the ribbon and snapped it into place.  It may have been easier to thread on the pacifier clip before installing any Snap parts but I was able to feed it through without much trouble.
6. Now on the side where the Pacifier will be attached, adjust the internal snap at a comfortable distance to accommodate the width of the handle.  I went an additional 1/2" for the Pacifier, I used.
7. Now snap the Pacifier in place, attach to your child's shirt and go.
8. Tada!  Happy Snapping!!!

Monday Humor @ ILikeBigButtons.com November 02 2020

Friday Humor @ ILikeBigButtons.com October 23 2020

Some days, for sure! 😜

BTW, this is B38 - Deep Red, one of my all-time favorite KAM plastic snap colors. It is the quintessential red and reminds me of fall apples, fire trucks, and school pride. Can you guess what one of my school colors was growing up? 🥰 If you are not into Deep Red, we carry 9 other shades of red, 15 shades of pink, and 130+ unique colors of snaps.

I Like Big Buttons! KAM Plastic Snaps - Color Of The Day!!! B40 - Pumpkin 🎃 October 19 2020

I Like Big Buttons! KAM Plastic Snaps - Color Of The Day!!! B10 - Sunset Yellow October 09 2020

Our Sunset Yellow (B10) KAM Plastic Snap reminds me of brisk, but sunny Fall days and colorful Fall leaves.

If you are not into Sunset Yellow, we carry 9 other shades of yellow and 130+ unique colors of snaps.

I Like Big Buttons! KAM Plastic Snaps - Color Of The Day!!! B51 – Kelly Green Our Kelly Green (B51) September 30 2020

Color Of The Day!!! B51 – Kelly Green

Our Kelly Green (B51) KAM Plastic Snap reminds me of beautiful green grass and lazy summer days. I am not ready for summer to end! 😭

If you are not into Kelly Green, we carry 16 other shades of green and 130+ unique colors of snaps.

You Got This! Giveaway Week @ I Like Big Buttons! September 14 2020

Labor Day Sale!!! Take An Additional 15% Off Clearance Items September 04 2020

Happy Labor Day Weekend!!!

In honor of the last great Summer Weekend, today, September 4th, through Monday, September 7th, take an additional 15% off all our Clearance Craft Supplies using coupon code: CLEARANCE15

Clearance and Sale Link

I Like Big Buttons! KAM Plastic Snaps - Color Of The Day!!! G114 - Grape Soda August 31 2020

Our Grape Soda (G114) KAM Plastic Snap reminds me of the lingering lazy summer days, picnics at the river, and of course, a cool can of Grape Soda. ☀️😁☀️

If you are not into Grape Soda, we carry 16 other shades of purple and 130+ unique colors of snaps.

15% OFF MEGA Starter Packs in Size 20 and Size 16 @ I Like Big Buttons! August 25 2020

We are running a sale on our MEGA Starter Packs in Size 20 and Size 16. No coupon necessary.

You can choose from our Mega Starter Packs in Size 20 or Size 16 with either 10 or 25 sets of each color.

Size 20 Mega Starter Pack A:
Our first 60 KAM Snap Colors (B1 through B60) plus Clear in Size 20.

OR

Size 20 Mega Starter Pack B:
All 70 of our custom KAM Snap Colors (G61-G130) in Size 20

• Size 20 snaps are our most popular size and can be used for most general projects like baby diapers and clothing. Size 20 snaps have the largest color variety, have a good strong hold, and are a good size for most projects.
• Each set includes 2 round caps, 1 socket and 1 stud.

OR

Size 16 Mega Starter Pack A:
All 60 KAM Snap Colors (B1 through B60) in Size 16

• Size 16 (0.4" - 10.2 mm) snaps are most commonly used for baby and toddler clothing, pacifier clips, mama pads, and small crafts.
• Each set includes 2 round caps, 1 socket and 1 stud.

Pronged Stud Tutorial: Stackable KAM Plastic Snaps by I Like Big Buttons! August 19 2020

Pronged studs enable snap stacking. They take the place of a cap and allow your item to be snapped from both sides. While typically used to make a double-sided snap, they can be daisy-chained.

They are available in as few as 25, 100, and 1000 pieces.

Here is a simple tutorial to show the versatility of Pronged Studs.

Supplies:

• Size 20 KAM Plastic Snaps (Colors of your choosing)
• Size 20 Pronged Studs
• Sheets of Colored Felt or Fabric
• Scissors

1. Plan your layered flower, insert the Snap Cap through the first layer and back it with a socket. Form the KAM plastic snap.

2. Insert a Pronged Stud through the second layer and back it with a stud. Form the Pronged Stud and Stud together using the pronged stud die into the bottom of your press, and stud die into the top of your press.

3. Insert a Pronged Stud through the third layer and back it with a socket. Form the Pronged Stud and Socket together using the pronged stud die into the bottom of your press, and socket die into the top of your press.

4. Insert the Snap Cap through the fourth layer and back it with a socket. Form the KAM plastic snap.

5. Now snap all the layers together and enjoy!

6. Tada! Below is a close up for how they stack together. Pronged studs enable snap stacking. They take the place of a cap and allow your item to be snapped from both sides. While typically used to make a double-sided snap, they can be daisy-chained infinitely.

Pronged Studs:

• Have a 5.6mm prong like standard size 20 snaps.
• Requires a DK-98 press, size 20 pronged stud die, and size 20 three piece die set OR DK-93 press, size 20 pronged stud die, and size 20 three piece die set.
• Cannot be installed with snap pliers.
• Are sold as pronged studs only. Caps, sockets, and regular studs are available separately.

A stud or socket can be installed on the other side of the pronged stud. Just insert the pronged stud die into the bottom of your press, and the socket or stud die into the top of your press.

© ILikeBigButtons.com and I Like Big Buttons Blog, 2020.

I Like Big Buttons! KAM Plastic Snaps - Color Of The Day!!! G122 - Fuchsia August 18 2020

Happy Fourth of July 🎇!🎆 Professional KAM Plastic Snap Press GIVEAWAY! @ I Like Big Buttons! June 24 2020

School's Out For Summer! Giveaway @ I Like Big Buttons! June 08 2020

If you started singing - School's Out - by Alice Cooper, about a month ago you are not alone! You will find this song blasting from my home speakers we FINALLY enter the last week of school. 😜

Face Mask with Scrunchy Earpieces Using KAM Plastic Snaps Tutorial by ILikeBigButton.com April 23 2020

As a precaution, I have been making our family some face masks. Nothing fancy, I was limited to what supplies I had on hand. I made a mask with Elastic earlier, this one will be with ribbon ties.

So with some fabric scraps, ribbon (they mentioned you could use shoelaces as an option), sewing clips, and my trusting sewing machine, I found a set of instructions and struck out.

Here is the #1 version and #2 version I made:

Supplies:

• Face Mask Instructions (I used these as general guidelines)
• 2x 9.5" x 6.5" pieces of Fabric
• 2x 2" x 12" pieces of Fabric
• 2x 7" of Elastic (this is a good average size, but may need to be adjusted if you are a smaller person)
• KAM Plastic Snaps
• KAM Plastic Snap Pliers
• Sewing Clips
• Sewing Machine

1. Cut out 2x 9.5" x 6.5" fabric rectangles and 2x 2" x 12" fabric rectangles.

2. Iron the 2"x12" in half making a 1"x 12" fabric strip with right side facing in. Make 2.

3. Sew 1/4" seam along the long side (12" long seam) and turn then the tube right side out. Iron smooth.

4. Fish a 7" piece of elastic through the tube, I used a sewing clip to keep the back end of the elastic from getting lost in the tube. Pin the elastic level with the end of the tube. It should start to scrunch up some. The tube is 12" long and the elastic is 7" long.  Tuck the fabric into the tube without losing the elastic (use a second pin to keep in place) and sew the finished end of the earpiece that will be exposed. Make 2.

5. With the right side of 9.5" x 6.5" fabric facing up, pin the 2 fabric and elastic earpieces to the bottom corners. Like so.

6. Pin the second piece of 9.5" x 6.5" fabric facing down to the fabric with the earpieces tucked safely inside. Make sure the earpieces don't get caught in the edges while sewing.

7. Sew a 1/4" seam starting about 1/2 way on the long side. Go all the way around the perimeter, stopping when you have about 1.5" to 2" left. Make sure to go back and forth at each of the corners to anchor the ribbon. Leave that gap so that you can turn the face mask right side out.

8. Turn the mask right side out and iron it flat.

9. Make three pleats lengthwise, like you are folding a paper fan. I eyed it and used the sewing clip width as my pleat measurer, but if I was making more than a handful of these, I would make myself a template to make this part easier. The pleats help the mask form around the wearer’s face. Secure each pre-sewn pleat with a sewing clip as pictured above.

10. Now sew a 1/4"  stitch around the outer perimeter of the mask face, going back and forward over the corners to add more stability to the ribbon.

11. Then, top stitch a second time around the outer edge about 1/4" in from the first round of stitching.

12. Using your KAM Plastic Snap Pliers and KAM Plastic Snaps add a snap to the upper edge of the mask and the end of the loose earpiece.

13. Tada! You have a finished face mask. This was my husband's favorite because the elastic didn't rub and pull at his ears. I added a second KAM Plastic Snap in pink to each side to make the mask work better with my face.

*Afterthoughts, this mask was the perfect size for my husband, but I added another KAM Plastic Snap an inch in for me on the scrunchy earpiece. This also worked for my teens, but I will need to adjust for my smaller kiddos. This mask seems best sized for teens to adults.

💖 KAM Plastic Snaps Love Sale 💖 January 01 2020

Rounds, ❤️Hearts❤️, ⭐Stars⭐, and Long Prongs, Oh My!!! All our KAM Plastic Snaps are 15% OFF in our Quick Order Chart using coupon code: KAMSNAPLOVE

Merry Christmas! Professional KAM Plastic Snap Press GIVEAWAY! @ ILikeBigButtons.com December 08 2019

Only 17 More Days Until Christmas!!! How did that happen?!? We are sponsoring a Coral Pink DK-93 Professional Snap Press Giveaway!!! What better way to celebrate the gift-giving season!!! You will receive one of our custom Coral Pink DK-93 Press (as pictured) with a set of Size 20 Dies (will have all the parts to function, no additional expense will be required).

Giveaway good until Monday 12/16/19

See how to ENTER TO WIN below (Giveaway Rules*):

1. LIKE & SHARE this I Like Big Buttons! Facebook Giveaway Post publicly.

2. COMMENT on this I Like Big Buttons! Facebook Giveaway Post and share with us your favorite Christmas treat. - Our favorite here at I Like Big Buttons! is a toss-up between Muddy Buddy and Hot Cocoa with Candy Canes and LOTS of Whipped Cream. :)

3. Make sure you are a MEMBER of our I Like Big Buttons! Fan Group and LIKE the Professional Press Giveaway Post in the Fan Group (Post will be pinned in Announcements).

*If your name is drawn as the winner, we will check to make sure you have completed all the requirements above. One (1) Random winner will be drawn.

If you can’t wait and want our Coral Pink or Emerald Press, they are already on SALE our website no coupon needed.

***BONUS, Check out our Christmas Sale and get 10%-30% off your I Like Big Buttons! order (See Sales Details) @ I Like Big Buttons!

🎄 Shop Now!!! 🎄 Storewide 🎄 Christmas Sale @ ILikeBigButtons.com December 05 2019

 

🎄 Shop Now! We have extended our Storewide Sale through the 🎉 New Year 🎉 in a HUGE 🎄 🎄 🎄 Christmas Sale!

 

Coupon Codes (Good through the New Year on our website):

CHRISTMAS10 for 10% off orders $25+

CHRISTMAS15 for 15% off orders $125+

CHRISTMAS20 for 20% off orders $350+

CHRISTMAS30 for 30% off orders $1000+

***BONUS: Don't forget that US orders $99+ also get upgraded to free shipping!!! 

 

We hope you have a wonderful December and a very Merry Christmas!!!

I Like Big Buttons! and All Buttons big and small :)

 

KAM Snaps:

Pacifier Supplies:

Cover Buttons:

Key Fob Hardware:

Lobster Clasps:

Barrettes:

Bobby Pins:

Paper Clips:

Earring Supplies:

Sewing Clips:

And Much More...

 

Shop Now!!! Storewide 2019 Black Friday Sale @ ILikeBigButtons.com November 23 2019

 

Black Friday ... Small Business Saturday ... And Cyber Monday all rolled into one HUGE Storewide Sale!

Before we prepare to celebrate another amazing Thanksgiving with our family, I wanted to give all of you our Black Friday Deals so you can get started with some great Christmas crafts or for you pre-planners ;) some last-minute projects.

Coupon Codes (Good through December 12/5/19 on our website):

THANKFUL10 for 10% off orders $25+

THANKFUL15 for 15% off orders $125+

THANKFUL20 for 20% off orders $350+

THANKFUL30 for 30% off orders $1000+

***BONUS: Don't forget that US orders $99+ also get upgraded to free shipping!!!

Black Friday orders made Thanksgiving Day through December 1st (Sunday) will ship out Monday with our morning pickup. Thank you for your understanding and business! Happy Thanksgiving from our family to yours!!! Have a great crafty holiday week!!!

I Like Big Buttons! and All Buttons big and small :)

KAM Snaps:

Pacifier Supplies:

Cover Buttons:

Key Fob Hardware:

Lobster Clasps:

Barrettes:

Bobby Pins:

Paper Clips:

Earring Supplies:

Sewing Clips:

And Much More...

 

⚡️⚡️⚡️ Flash Sale - MINI Grab Bag: 250* KAM Plastic Snaps ⚡️⚡️⚡️ November 03 2019

⚡️ FLASH SALE - Today Only ⚡️

 

MINI Grab Bag: 250* Kam Snaps/Plastic Snaps for $6.95 (Regularly $10.95)

SALE LINK

I Like Big Buttons! Fun Facts: How We Prepare Our Plastic Snaps And Why October 28 2019

For all our new friends and followers of I Like Big Buttons!, it seemed like a great time to introduce you to our amazing Plastic Snaps!!!  For those of you who have been with us for a long time, here is a refresher.

We carry a variety of package deals for our snaps from 10 sets, 25 sets, 100 sets up to thousands of KAM snaps with and without pliers or professional press all at a great price. We have a listing for just about everyone at the price range and quantity you desire.

Our 25 packs sets came to be largely for cloth diapers, but over the last decade, they have become our most popular quantity for both our cloth diaper makers and our embroidery, snap tab making, and general sewing customers.

We provide the best of both worlds, smaller packs to those that want greater variety and larger packs for those looking to use snaps in bulk.

Some of the other these reasons we offer these great options include:

* An equally large demand for “just a sampling of every color”, which gave birth to our sets of 10 and Starter Packs.

* We also offer individual parts in quantities of 100 and 1000 in all of KAM Plastic Snaps 130+ colors.

If you aren't sure how to jump into plastic snaps, we also carry starter packs including multi-packs of 10 or 25 sets of snaps.  If you are new to snapping, we have starter packs with plastic snap pliers, awl, and an instructional DVD.  These Starter Packs are a great way to get addicted :).  We have 18 preset themes including Rainbow Spectrum, Pastel Spectrum, Vibrant Boy, Vibrant Girl, Patriotic, Military, and many others.

Check out our convenient Starter Packs:

We also offer an option to choose your own colors.  You can pick from any of KAM Plastic Snaps 130+ fun colors. Have you taken a moment to check out our easy to navigate KAM Snap Visual Ordering Chart!?!

Here is our chart of available colors, we carry over 130+ great KAM Plastic Snap colors.

Other KAM Plastic Snap Deals going on right now:

Rainbow GRAB BAG: Random 1000* Kam Plastic Snaps for $21.95 (Regularly $35.95)

1000* Kam Snaps/Plastic Snaps for $18.95 (Regularly $35.95)

See our Clearance and Sales Section for other great deals!

NEW!!! K2 - BASIC - Plastic Snap Pliers And Awl October 08 2019

K2 BASIC Pliers are an inexpensive option that work great for snap application or if you would like to have a second set of pliers. These pliers make a great gift for a friend or family member who wants to get into snaps.

Labor Day Sale!!! $3.00 for 100 Sets (Choose from 130 Colors) KAM Plastic Snaps Sale and More August 30 2019

Happy Labor Day Weekend!!! 

In honor of the last great Summer Weekend, we are running a number of KAM plastic snap sales including $3.00 for 100 Sets of any of our 130 colors and a number of other great KAM Plastic Snap product deals.  Check them out in the links below:

100 Sets of KAM Snaps in Size 20 for $3.00 (Regularly $3.50+)

100 Sets of KAM Snaps in Size 16 for $3.00 (Regularly $3.50+)

Other KAM Plastic Snap Pliers Deals:

 12% Off - KAM Removal Pliers

12% Off - K2 KAM Plastic Snap Pliers

Other KAM Plastic Snap Deals:

Rainbow GRAB BAG: Random 1000* Kam Plastic Snaps for $21.95 (Regularly $35.95)

1000* Kam Snaps/Plastic Snaps for $18.95 (Regularly $35.95)

See other deals in our Clearance Section @ ILikeBigButtons.com. Sale good through Monday, 9/2/2019.

"No Sew" KAM Plastic Snaps Backpack Embellishments by ILikeBigButtons.com August 28 2019

My kiddos wanted a little embellishment on their backpacks this year so that they could tell theirs from the sea of backpacks at school. Simple, "No Sew", and I was able to customize each kiddo's backpack to match their personality. KAM plastic snaps to the rescue!

Mr. J wanted his backpack in his favorite color: Orange! He picked Size 20 KAM Plastic Snaps - B52 - Dark Orange.

Mr. M likes a little pizzazz in his wardrobe and his backpack is no exception. He picked Size 20 KAM Plastic Snaps - G96 -Mirror (Round shaped) and Star-Shaped KAM Plastic Snaps - G124 - Robin's Egg Blue.

Miss E is all about love. She chose Heart-Shaped KAM Plastic Snaps in G99 - Lilac and G96 - Mirror.

To see other great KAM Plastic Snap ideas, visit our DIY Project section here.

Adding Button Enclosure to Sweatpants Pocket with KAM Plastic Snaps by ILikeBigButtons.com July 22 2019

I love my slouchy sweatpants for getting work done around the house, but their comfortable pockets are useless when for holding onto my phone when I am talking to my sister while we clean via wireless headsets. :) KAM plastic snaps to the rescue! I turned my useless slouch pocket into a secure button enclosed, phone holding pocket in just a few seconds with KAM plastic snaps.

Supplies:

• KAM Plastic Snaps
• KAM Plastic Snap Pliers and Awl

I used some fun colored snaps from the KAM plastic snaps Grab Bag making bucket. 

Easy Peasy, I wore my phone around all day while I cleaned and worked. It was secure the whole time and with a quick unsnapping on hand when I needed it. KAM plastic snaps are the BEST! 

Tada! I can see tons of hand-free cleaning in my future without fear that my phone will fall out of my pocket while I am moving.

To see other great KAM Plastic Snap ideas, visit our DIY Project section here.

I Like Big Buttons! FLASH SALE on KAM Plastic Snaps - $0.50 for 10 sets!!! May 22 2019

******$0.50 for 10 sets of KAM Snaps (17% off)******

We have 130 great colors to choose from!!!

In Size 20 (Standard Prong):

In Size 16 (Standard Prong):

OR for those KAM Plastic Snaps Size 20 Long Prong users take 10% with coupon code: LONGPRONGLOVE

Make sure you are a member of our I Like Big Buttons! Facebook Group (https://www.facebook.com/groups/ilikebigbuttons/) and don't forget to turn ON your notifications so you don't miss our latest news and deals.

**Good through Friday 5/24/19

Rainbow GRAB BAG: Random 1000* Kam Plastic Snaps (Size 20) for $21.95 (Regularly $34.95)

Mystery Grab Bag: 1000 Kam Snaps/Plastic Snaps (Size 20) for $22.95 (Regularly $34.95)

Grab Bag: 1000* Kam Snaps/Plastic Snaps for $18.95 (Regularly $34.95)

**Good through Friday 5/24/19

President’s Day Sale! KAM Plastic Snap Sale!!! February 18 2019

President's Day Sale!  KAM Plastic Snap Sale! Up to 60% off --> Check them out in the links below* (no coupons necessary):

Random Grab Bag: 1000* Kam Snaps/Plastic Snaps for $13.95 (Regularly $34.95)

President's Day Grab Bag: 1000* Kam Snaps/Plastic Snaps for $14.95 (Regularly $34.95)

1000* Kam Snaps/Plastic Snaps for $16.95 (Regularly $34.95)

Mystery 1000 Kam Snaps/Plastic Snaps for $22.95 (Regularly $34.95)

to I Like Big Buttons! Friends and Fans!!! Good Today Only (Monday - 2/18) on our website (Links Above). *Supplies may be limited.

How To Make A KAM Plastic Snap Cord Keeper/Organizer by ILikeBigButtons.com February 05 2019

Cords, cords, cords!!! Despite my husband's best efforts to make our house wireless, there are cords everywhere. Part of the joy of being a mom of many, I suppose. 😜 Everyone has one or more somethings that need to be charged and my husband makes sure there are enough cords so that no one is left crying. Have I mentioned he is my resident computer wiz? A job he proudly takes on.

So with cords abounding in my life and house, I decided we needed a better way to manage them all. Here are the results of my efforts. Cord keepers/organizers to simplify my life and corral the cords we can't live without. 🤪

Supplies:

• Approximately 5.25" x 2" Marine Vinyl or material of your choice
• KAM Plastic Snaps (I used Long Prong KAM Plastic Snaps because I was working with 2 layers of Marine Vinyl)
• KAM Plastic Snap Pliers and Awl
• Sewing Clips
• Standard Sewing Machine
• Scissors
• Rotary Cutter

Instructions:

1. Cut out your material of choice, I used Marine Vinyl I had left over from a summer project. I cut each piece approximately 5.25" x 2" and gave them two different styles of finished ends. One is a pointed end, I used my quilting square to accomplish this, and the other has a rounded end, I used a small drinking cup to create the rounded tip. *The cords I was making these for were 6' cords, you may need to adjust the length of your cord keeper to accommodate a larger or smaller cord.

2. Place the two pieces of Marine Vinyl with wrong sides together and pin with Sewing Clips, if desired. Straight stitch with a 1/4" seam around the whole piece using a back stitch at the beginning and end to set the stitch. 

3. Trim the edges down to 1/8" to remove the excess vinyl and any uneven edges. The Marine Vinyl can slip a little bit when you are sewing and I found this was the easiest way to get a clean edge.

4. Measure to the center at the top and bottom of each cord keeper/organizer and place a mark where you want your KAM Plastic Snap to sit. I don't like to eye it as I often find them off-center when I wing it.

5. Poke a hole through the centered mark with your KAM Awl and insert the KAM Plastic Snap Cap prong through the hole. You will want the cap on the top side (the side that was up when sewing) of your cord keeper and the socket or stud on the bottom side.

6. Flip the cord keeper over and add the socket.  Install the KAM Plastic Snap Cap and Socket on the edge that is rounded or pointed and a Cap and Stud on the square edge as pictured below.

7. Remember to install the snaps so that one half (Cap and Stud) are face up and one (Cap and Socket) are face down so that when you fold the cord keeper around the cord, the socket and stud meet.

8. Tada! These cord keepers/organizers take only minutes to make with scraps of vinyl/fabric, a few KAM Plastic Snaps, and are already making my life feel less crazy. At least until they all get home from school. 😜

To see other great KAM Plastic Snap ideas, visit our DIY Project section here.

Happy New Year Giveaway Week @ ILikeBigButtons! January 13 2019

2019 Welcoming The New Year - SUPER KAM Plastic Snap SALE @ ILikeBigButtons.com December 28 2018

The End of the Year is upon us!  As we prepare to welcome 2019, we wanted to celebrate the last bit of 2018 with a SUPER KAM Plastic Snap SALE!!!  Time to Stock Up!!!

Details and Sales Links Below

(Good through January 2rd, 2019 on our website only.)

KAM Plastic Snaps 100 Sets Sale

100 Sets of KAM Snaps in Size 20 for $2.85 (Regularly $3.50+)

100 Sets of KAM Snaps in Size 16 for $2.85 (Regularly $3.50+)

KAM Plastic Snaps 1000 Sets Sale

1000 Sets of KAM Snaps in Size 20 for $27.00 (Regularly $30.00+)

1000 Sets of KAM Snaps in Size 16 for $25.00 (Regularly $30.00+)

KAM Plastic Snap Mixed Sets Sale

100 KAM Snaps Sets (Mixed) for $1.95 (Regularly $3.95)

1000* Kam Snaps/Plastic Snaps for $15.95 (Regularly $34.95)

Mystery 1000 Kam Snaps/Plastic Snaps for $22.95 (Regularly $34.95)

See other deals in our Clearance Section @ ILikeBigButtons.com. Sale good through Wednesday, 1/2/2019.

KAM Snap Upcycled Jean Christmas Ornaments by ILikeBigButtons.com December 05 2018

Today I decided a need a few Upcycled Jean Christmas Trees. As I have mentioned in the past, finding jeans destine for the scrap pile is no problem with a house full of rambunctious kiddos. These cute trees also remind me of some that my parents had when we were growing up.

Supplies:

• A set of holey Jeans
• Star KAM Snaps
• KAM Snap Pliers and Awl
• Fabric of your choice (I picked Christmasy colored cotton fabric)
• Ribbon
• Quilt Batting or Pillow Stuffing
• Fabric Adhesive
• Standard Sewing Machine
• Scissors

1.  Make a simple Christmas Tree template and trace on your jean fabric with a permanent marker.

2.  Make pairs of each tree so that you have a front and back for each tree. You could also use felt or fabric on the back to extend the impact of your jean fabric.

3.  Cut the Christmas Tree template down. I took about a 1/2" on each side/angle. Make a Fabric Christmas Tree silhouette for each Jean Christmas Tree.

4.  Use a Fabric Adhesive to adhere the Christmas Tree silhouettes to the fronts sides of the Jean Christmas Trees.

5.  Use a decorative stitch to outline the Upcycled Jean Christmas Trees on two sides. Then fill with quilt batting or pillow filling.

6.  Finish stitching along the bottom swoop of the Christmas Tree. Add a loop of decorative ribbon and a Star KAM Plastic Snap to the top of the Christmas Tree.

Additional Crafty Ideas:

• You could add multiple cuts along the edges of the trees to add more character.
• Or you could fray the edges of the trees.
• You could give the trees finished edges, but that wasn't the look I was personally going for.
• You could add KAM Snaps; both Star, Heart, and Round shaped into the body of the tree to represent ornaments or twinkling lights.

7.  Tada! I think they turned out great and add a great pop of color to our Christmas Tree.