News

I Like Big Buttons! Lacy Fabric Cover Button Earrings and Cover Button Bracelet November 12 2016

Today I worked alongside my daughter to make her dear friend a special and one of a kind birthday gift.  I think they turned out great and it was wonderful to get to work with one of my kiddos.  :)

Take 10% off our Cover Buttons on our website (Good through 11/14): BUTTONLOVE

Lacy Fabric Cover Button Earring Supplies:

Lacy Fabric Cover Button Bracelet Supplies:

cover-button-clip-on-earrings-and-bracelet-with-words

Check out our Tutorials below.

Lacy Fabric Cover Button Earring Tutorial here.

Fabric Cover Button Bracelet Tutorial here.

To see our other great Fabric Cover button ideas, visit our DIY Project section here.


An I Like Big Buttons Christmas! Idea #4: How To Make Fabric Cover Button Christmas Cards December 04 2015

Cover Button Christmas Card Tutorial title pic

Gift idea #4:  These charming Christmas cards are adorable and easy to make using Fabric Cover Buttons.  You could embellish these additionally by make the Cover Buttons actual earrings with our Earring Supplies: Earring Posts or Clip Ons and it could double as a gift and Christmas Card.  Check it out!

Supplies:

Instructions:

1.  Cut your fabric scrap. You will want a circle that is about twice the diameter of your button blank or use one of our handy Plastic Cover Button TemplatesSee More

#ilikebigbuttons #tutorials #coverbuttons #christmas #christmascards

Cover Button Christmas Card Tutorial pic 18


An I Like Big Buttons Christmas! Idea #3: How To Make Fabric Cover Button Earrings December 01 2015

Lace Cover Button Earrings pic 26

Gift idea #3:  Super easy with a lot of impact these cute Earrings using Fabric Cover Buttons and Earring Backs or Clip On Earring Backs.  I made these as gifts for some of my trendy cousins last Christmas and they loved them.  Easy to embellish, monogram or personalize and add extra pizzazz to your loved ones attire!

Supplies:

  • 2 Completed Flat Back Fabric Cover Button (Choose your size, Size 20 through Size 60 all work great, size depends on the statement you want to make)
  • 1 set of Earring Post & Backs
  • E6000 or comparable adhesive

Steps:

  1. Follow these instructions to make Flat Back Fabric Covered Buttons.  See More

Pin for Later: 

#ilikebigbuttons #earrings #tutorials #coverbuttons #coverbuttonearrings

Earring pic 6


Lace & Fabric Cover Button Earrings February 09 2015

Today, I am working on some cute Lacy Earrings using Fabric Cover Buttons*.  I made these as gifts for some of my trendy cousins for Christmas and they loved them.  Check them out!

*Just a reminder we have 10%OFF on our website today using Coupon Code: PATREV

Supplies:

Lace Cover Button Earrings pic Title

Lace Cover Button Earrings pic 1

Lace Cover Button Earrings pic 2

Lace Cover Button Earrings pic 3

Instructions:

1.  Cut your fabric scrap. You will want a circle that is about twice the diameter of your button blank or use one of our handy Plastic Cover Button Templates.

Lace Cover Button Earrings pic 4

Lace Cover Button Earrings pic 5a

Lace Cover Button Earrings pic 6

2.  Put your lace piece in the larger assembly tool piece (RIGHT SIDE DOWN).   Then, put your fabric piece in the larger assembly tool piece (RIGHT SIDE DOWN). When you look into the tool you want to see the back of the fabric.

Lace Cover Button Earrings pic 7

3.  Place the button front (the domed piece) on top of the fabric. Leave the fabric edges hanging out.

Lace Cover Button Earrings pic

Lace Cover Button Earrings pic 8

Lace Cover Button Earrings pic 9

4.  Press the Cover Button edges down into the tool.

Lace Cover Button Earrings pic 10

5.  Place the back cover button piece on top of your fabric and button front. If the cover button will be subject to repeated tugging from the back, you may want to add a little e6000 adhesive before attaching the back.

Lace Cover Button Earrings pic 12

6.  Take the smaller piece of the assembly tool and with the open side down place it on the button back.

7.  Press down. You may hear a pop when the last bit of the button back slips into place. If you take the tool out and the button is not completely secured, just put it back in and press down again.

Lace Cover Button Earrings pic 13

8.  When you take the small assembly tool piece off, the fabric edges will be secured underneath the button back.

Lace Cover Button Earrings pic 14

Lace Cover Button Earrings pic 15

9.  Remove the button from the larger assembly tool piece.

Lace Cover Button Earrings pic 16

10.  Tada!  First step complete.

Lace Cover Button Earrings pic 17

Lace Cover Button Earrings pic 18

11.  Lightly scuff the back of the Cover Button so the glue will adhere better (not essential but recommended).

Lace Cover Button Earrings pic 19

Lace Cover Button Earrings pic 20

12.  Clean both surfaces of dust.  I used rubbing alcohol and a cotton swab.

Lace Cover Button Earrings pic 21

13.  Apply E6000 to back of Cover Button or Earring Post.

Lace Cover Button Earrings pic 22

Lace Cover Button Earrings pic 23

14.  Press Earring Post into place and remove any extra Adhesive.  On smaller sized Cover Buttons center the post, as they increase in size adjust post towards top.

Lace Cover Button Earrings pic 25

15.  Let dry, add Earring Backing/Nut, and enjoy.

Lace Cover Button Earrings pic 26

16.  Tada!  You could also make the Cover Button Clip Ons Earrings and these are great a gifts or as products for your shop.


Fabric Cover Button Christmas Card Tutorial December 12 2014

Fabric Cover Button Christmas Cards

Today, I am working on some cute Christmas cards using Fabric Cover Buttons*.  Check them out!

*Just a reminder our Cover Buttons are 10%OFF on our website today using Coupon Code: COVERBUTTON10

Supplies:

Cover Button Christmas Card Tutorial title pic

Cover Button Christmas Card Tutorial pic 1

Cover Button Christmas Card Tutorial pic 2

Cover Button Christmas Card Tutorial pic 3

Cover Button Christmas Card Tutorial pic 4

Instructions:

1.  Cut your fabric scrap. You will want a circle that is about twice the diameter of your button blank or use one of our handy Plastic Cover Button Templates.

Cover Button Christmas Card Tutorial pic 5

2.  Put your fabric piece in the larger assembly tool piece (RIGHT SIDE DOWN). When you look into the tool you want to see the back of the fabric.

Cover Button Christmas Card Tutorial pic 7

3.  Place the button front (the domed piece) on top of the fabric. Leave the fabric edges hanging out.

Cover Button Christmas Card Tutorial pic 8

4.  Press the cover button edges down into the tool.

Cover Button Christmas Card Tutorial pic 9

5.  Place the back cover button piece on top of your fabric and button front. If the cover button will be subject to repeated tugging from the back, you may want to add a little e6000 adhesive before attaching the back.

Cover Button Christmas Card Tutorial pic 10

6.  Take the smaller piece of the assembly tool and with the open side down place it on the button back.

7.  Press down. You may hear a pop when the last bit of the button back slips into place. If you take the tool out and the button is not completely secured, just put it back in and press down again.

Cover Button Christmas Card Tutorial pic 11

8.  When you take the small assembly tool piece off, the fabric edges will be secured underneath the button back.

Cover Button Christmas Card Tutorial pic 12

Cover Button Christmas Card Tutorial pic 13

9.  Remove the button from the larger assembly tool piece.

Cover Button Christmas Card Tutorial pic 14

10.  Tada!  First step complete.

Cover Button Christmas Card Tutorial pic 15

11.  Using a ruler, I made 8 straight lines of varying lengths.  Then I drew a bow on top of each and a small ornament top.

Cover Button Christmas Card Tutorial pic 16

12.  Then in your best print write Merry Christmas.  How else doesn't like their own handwriting :P ?  I need to practice my pretty cursive more often.

Cover Button Christmas Card Tutorial pic 18

Cover Button Christmas Card Tutorial pic 19

13.  I think it turned out lovely.  You could also make the Cover Buttons actual earrings with our Earring Supplies: Earring Posts or Clip Ons and it could double as a gift and Christmas Card.


New Arrivals!!! Clip On Earring Backs for Fabric Cover Button Earrings December 02 2014

We are excited to announce that we now carry Clip-On Earring Backs in 2 sizes for our line of Cover Buttons!  We thrilled to offer a non-pierced earring option for our customers.  You can purchase them with or without rubber cushions that help provide support and comfort for earring wearing. 

Check them out!

9 mm or 15 mm Clip On Earrings pic 2

9 mm Clip On Earrings pic 1 with words

15 mm Clip On Earrings pic 1 with words

15 mm Clip On Earrings pic 3


Back to the top