30 Days of Snaps!!! Day #17: How to make a Fabric Pacifier Clip with KAM Snaps and a Pacifier Clip June 18 2014

Day #17

Making a Fabric Pacifier Clip with KAM Snaps and Pacifier Clip

Today, I am making a pretty Fabric Pacifier Clip with KAM Snaps and a Pacifier Clip.  Functional and pretty too!!!

Supplies for a Fabric Pacifier Clip:

fabric pacifier clip with kam snaps pic1

fabric pacifier clip with kam snaps pic2

Instructions:

1.  Choose a piece of Fabric, cut it to the dimensions: 14" x 3 1/2", the finished product once ironed, folded and sewn will be approximately 7/8" wide x 12" long.

fabric pacifier clip with kam snaps pic3

2.  Fold both 3 1/2" wide ends in 1/4" and iron flat.

fabric pacifier clip with kam snaps pic4

3.  Now fold and iron the fabric in half the long way (14" length).

fabric pacifier clip with kam snaps pic5

4.  Then fold and iron again, bringing the outer edges to the middle "iron line" and iron along those edges. Repeat on other side.

5.  Re-iron the seam so that the Fabric is smooth and flat, it should now be 13 1/2" long x 7/8" wide.

fabric pacifier clip with kam snaps pic6

6.  Open the top of the Fabric strip and trim the excess internal fabric at an angle so that there is less chance of the ends peeking out when sewn together.  Repeat on the other end.

fabric pacifier clip with kam snaps pic7

7.  Pin the Fabric strip in a couple places to keep it in place.

fabric pacifier clip with kam snaps pic8

8.   Sew a 1/8" seam across the top 7/8", down the length of the Fabric, and back across the bottom 7/8" making sure to back stitch at the start and finish to set the seam.

fabric pacifier clip with kam snaps pic9

9.  Put the Pacifier Clip on the Fabric strip about 1" in.

fabric pacifier clip with kam snaps pic10

10.  Fold back 1" of the strip back onto itself.

fabric pacifier clip with kam snaps pic11

11.  Straight stitch across the Fabric strip just behind the Pacifier Clip and again a 1/2" later just before the end of the doubled over Fabric strip.  Make sure to set the stitch both times.

fabric pacifier clip with kam snaps pic12

12.  Now on the side where the Pacifier will be attached, I installed a Cap and Socket about 1/2" from the edge.  I used Size 20 snaps for this tutorial but either Size 20 or Size 16 will work great.

fabric pacifier clip with kam snaps pic13

13.  Make sure that the internal snap in a comfortable distance to accommodate the width of the handle, I spaced my KAM Snaps about 2" apart using the Pacifier I have with the biggest handle.


fabric pacifier clip with kam snaps pic14

14.  Now snap the Pacifier in place, attach to your child's outfit and go.

fabric pacifier clip with kam snaps pic15

15.  Tada!  Happy Snapping!!!